
	Version 4.5.1	SEARCH INDEX CONTENTS \| PDF PAGE PDF BOOKS \| HOME UP PREV NEXT

— Adabas Review Reference —

Field Reference

This part of the documentation describes the fields that may be used when creating Adabas Review reports using the Edit Report (ER) command.

The Adabas Review field reference documentation is organized in the following topics:

Field Categories
Alphabetic Listing
Adabas Control Block Fields (CB)
Adabas Command Log Fields (CLOG)
Adabas Buffer Fields (BUF)
Interval and Time Fields (IT)
Adabas I/O Fields (I/O)
Natural Fields (NAT)
Adabas Nucleus Fields (NUC)
Operating System Fields (OS)
Transaction Processing Monitor Fields (TP)
User Fields (UF)

Field Categories

The fields used in Adabas Review reports are grouped into the following categories:

Code	Category	Includes report fields . . .	Special Considerations
CB	Adabas Control Block Fields	that correspond to or are derived from Adabas control block fields.	---
CLOG	Adabas Command Log Fields	that are derived from the Adabas command log.	---
BUF	Adabas Buffer Fields	that correspond to segments of the format, ISN, record, search, and value buffers.	When you specify a field from this category, Adabas Review automatically requires this information from the Adabas nucleus. This leads to more data to be sent from the Adabas nucleus to Adabas Review. Note: To limit the size of the transferred data the ADARUN REVLOGBMAX or REVLOGMAX parameters can be used. Missing data might also be associated with the setting of these parameters. If you are running Adabas Review in batch, the Adabas nucleus session that created the command log needs to run with the associated ADARUN parameter LOG`xx` parameter. For example, for FBSEG01 you need to specify LOGFB=YES.
IT	Interval and Time Fields	that establish intervals for control breaks. Fields in this category also display specific times for Adabas command processing.	---
I/O	Adabas I/O Fields	for analyzing the I/O operations that are performed against the Adabas associator, data storage, and work data sets.	When you specify a field from this category, Adabas Review automatically requires this information from the Adabas nucleus. This leads to more data to be sent from the Adabas nucleus to Adabas Review and creates additional CPU overhead in the Adabas nucleus address space. If you are running Adabas Review in batch, the Adabas nucleus session that created the command log needs to run with the associated ADARUN parameter LOGIO=YES.
NAT	Natural Fields	for determining information about the Natural programs issuing Adabas calls.	When you specify a field from this category, you must also specify the Natural profile parameter ADAPRM=ON for your Natural user working environment. If you are running Adabas Review in batch, the Adabas nucleus session that created the command log needs to run with the associated ADARUN parameter LOGCLEX=YES.
NUC	Adabas Nucleus Fields	for analyzing Adabas nucleus information.	If you are running Adabas Review in batch, the Adabas nucleus session that created the command log needs to run with the associated ADARUN parameter LOGCLEX=YES.
OS	Operating System Fields	for displaying operating system-related information.	If you are running Adabas Review in batch, the Adabas nucleus session that created the command log needs to run with the associated ADARUN parameter LOGCLEX=YES.
TP	Transaction Processing Monitor Fields	for displaying information about the transaction processing monitor used with applications issuing Adabas calls.	If you are running Adabas Review in batch, the Adabas nucleus session that created the command log needs to run with the associated ADARUN parameter LOGCLEX=YES.
UF	User Fields	defined by the user that contain user-specified data for reporting.	A maximum of five Adabas Review user fields can be defined, with the names USERFLD1 through USERFLD5.

Notes:

References to an Adabas session pertain to a user's session with Adabas.. References to an Adabas nucleus session pertain to the duration that Adabas is active. When Natural utilities issue Adabas calls, the values of NATLIB, NATPROG, and NATSTMT do not denote user applications objects.
When a Natural object is invoked by means of a CALLNAT, PERFORM or FETCH statement, Natural may generate Adabas calls to load the invoked programming object into the buffer pool. In such a situation, the value of may be incorrect. Ignore Adabas calls to FNAT and FUSER to avoid misinterpretation of the value.
When a program is executed by means of the RUN command, the values of NATLIB, NATPROG and NATSTMT may be incorrect, because it is e.g. possible to RUN a nameless object from within the Natural program editor. Use the EXECUTE command to obtain correct values When a Natural programming object contains copy codes, NATSTMT may contain the line number within a copy code.

Alphabetic Listing

The following alphabetic listing of all reporting fields also indicates the category, field length, and the format (B=binary, C=alphanumeric, and T=the first four bytes of store clock value) of each field.

Note:
Descriptions of each field can be found in the category field listings. Click on the category name in the following tables to find the description of the field.

A	C	E	G	I	L	N	P	R	T	V	Y
B	D	F	H	J	M	O	Q	S	U	W	Number

-A-

Field System Name	Category	Field Length	Format	Alternate Names	Description
ABALLOC	NUC	4	B	---	The number of bytes of attached buffer space currently used. An attached buffer is an internal buffer used for interregion communication.
ABDATE	NUC	8	C	---	The date (in YYYY-MM-DD format) when the attached buffer high-water mark was reached.
ABENT	NUC	4	B	---	The current number of attached buffer entries.
ABPCT	NUC	4	B	---	The maximum percentage of attached buffer space used during the Adabas nucleus session.
ABSIZE	NUC	4	B	---	The total amount (in bytes) of attached buffer space allocated at Adabas nucleus startup.
ABTIME	NUC	8	C	---	The time (in HH:MM:SS format) that the attached buffer high-water mark was reached.
ABUSED	NUC	4	B	---	The maximum number (in bytes) of attached buffer space used during the Adabas nucleus session.
ACBUSER	CB	4	B	---	This field, comprising the last four bytes of the ACB, contains user data that is passed with the Adabas call. It is referred to as the user area field in the ACB, and is neither used nor modified by Adabas.
ACCTINF2	OS	16	C	---	Accounting information about the user that issued the Adabas call for z/OS batch jobs. This field will contain the second value specified in the account field of the job card.
ACCTINFO	OS	16	C	---	Accounting information about the user that issued the Adabas call. For z/OS batch jobs, the field will contain the first value specified in the account field of the job card. For Com-plete users, the field will contain the account information specified in the user's Com-plete profile.
ACINAME	TP	8	C	CURENPGM	The program name of the Adabas CICS link routine for the DCI interface: ADADCI.
ADADURA	IT	4	B	---	Adabas duration. Corresponds to the DURATION field. This field contains the amount of time (in seconds) that the command spent in the Adabas thread, including the time spent waiting for the completion of I/O operations. The ADADURA field differs from the DURATION field in that the time is computed to 6 decimal places instead of 4 decimal places.
AD1	CB	8	B	ADD1 ADDIT1	Alternate name for ADDIT1.
AD2	CB	4	B	ADD2 ADDIT2	Alternate name for ADDIT2.
AD3	CB	8	B	ADD3 ADDIT3	Alternate name for ADDIT3.
AD4	CB	8	B	ADD4 ADDIT4	Alternate name for ADDIT4.
AD5	CB	8	B	ADD5 ADDIT5	Alternate name for ADDIT5.
ADD1	CB	8	B	AD1 ADDIT1	This name is used in the schema portion of the summary record. It is an alternate name for ADDIT1.
ADD2	CB	4	B	AD2 ADDIT2	This name is used in the schema portion of the summary record. It is an alternate name for ADDIT2.
ADD3	CB	8	B	AD3 ADDIT3	This name is used in the schema portion of the summary record. It is an alternate name for ADDIT3.
ADD4	CB	8	B	AD4 ADDIT4	This name is used in the schema portion of the summary record. It is an alternate name for ADDIT4.
ADD5	CB	8	B	AD5 ADDIT5	This name is used in the schema portion of the summary record. It is an alternate name for ADDIT5.
ADDIT1	CB	8	B	ADD1 (used in summary record) AD1	Corresponds to the ACB field additions 1. The command to be executed determines whether this field is used and what the contents represent.
ADDIT2	CB	4	B	ADD2 (used in summary record) AD2	Corresponds to the ACB field additions 2. The command to be executed determines whether this field is used and what the contents represent. When ADARUN parameter CLOGLAYOUT is set to 8, the content of this field is taken from the ACBX structure. Note that there are differences in meaning of the Additions 2 field in the ACBX and in the ACB. In the ACBX, some information that was formally available in the ACB is no longer available. For example, the error-related subcode information that was originally provided in the Additions 2 in the ACB is now no longer provided in the ACBX control block structure; instead, the subcode is provided in the Adabas ACBXSUBS (Subcomponent Response Subcode) field. Therefore, in Adabas Review, if the ADARUN parameter CLOGLAYOUT is set to 8, you will find the information from the older ACB structure in the following separate Adabas Review fields: CMPRECL contains the compressed record length. ERRFLDNM contains the error field name. RSPSUB contains the subcode for an Adabas response code. UCMPREL contains the uncompressed record length.
ADDIT3	CB	8	B	ADD3 (used in summary record) AD3	Corresponds to the ACB field additions 3. The command to be executed determines whether this field is used and what the contents represent.
ADDIT4	CB	8	B	ADD4 (used in summary record) AD4	Corresponds to the ACB field additions 4. The command to be executed determines whether this field is used and what the contents represent.
ADDIT5	CB	8	B	ADD5 (used in summary record) AD5	Corresponds to the ACB field additions 5. The command to be executed determines whether this field is used and what the contents represent.
ASSOIO	CLOG	2	B	ASSO-IO	The number of asynchronous Associator read I/Os for this command.
ASSO-IO	CLOG	2	B	ASSOIO	Alternate name for ASSOIO.
ASSOREAD	I/O	4	B	----	Associator read. The total number of Associator read I/Os that occurred during the Adabas session. This value is updated every minute and not when each command is issued.
ASSOWRIT	I/O	4	B	---	Associator write. The total number of Associator write I/Os that occurred during the Adabas session. This value is updated every minute and not when each command is issued.

-B-

Field System Name	Category	Field Length	Format	Alternate Names	Description
BUFFEFF	NUC	4	B	---	Buffer efficiency. Contains the ratio of the number of calls to the Adabas buffer pool manager to the number of Adabas physical read requests made to the Associator and the Data Storage devices. For example, if the number of read I/Os is 100 and the number of calls to the buffer pool manager is 500, the buffer efficiency is 500/100 or 5. The higher the buffer efficiency number, the more efficient is the use of buffer space. If the buffer efficiency number is low, it is recommended that you increase the LBP (length of buffer pool) ADARUN parameter.
BUFFLUSH	NUC	4	B	---	The number of times that the Adabas buffer pool (LBP) was flushed during the Adabas nucleus session.
BUFFWAIT	NUC	4	B	---	The number of times that Adabas Review had to wait for a buffer.

-C-

Field System Name	Category	Field Length	Format	Alternate Names	Description
CALLPGM	TP	8	C	---	The program that executed the last EXEC CICS LINK or XCTL command. In non-DCI situations, this is the program calling the Adabas CICS link routine via EXEC CICS LINK In DCI interface situations (used by Natural), this is the name of the executing program if there was no previous EXEC CICS LINK or, if there was a previous EXEC CICS LINK, the name of the program that executed the last EXEC CICS LINK.
CALLTYPE	CLOG	8	C	---	Contains the type of the Adabas call that was issued. Possible values are: "PHYSICAL": indicates a standard Adabas call "REMOTE": indicates a call arriving via Entire Net-Work.
CID	CB	8	C	---	Corresponds to the hexadecimal value of the ACB field command ID. This field serves important functions, determined by the command, during command execution. For example, during a sequential read, the command ID is used to return the records to the user in the proper sequence. This field displays the value of the CID in hexadecimal format (for example, if CID=ABCD, it is displayed in this field as "C1C2C3C4").
CIDALPHA	CB	4	C	---	Corresponds to the alphanumeric value of the ACB field command ID. This field serves important functions, determined by the command, during command execution. For example, during a sequential read, the command ID is used to return the records to the user in the proper sequence. This field displays the value of the CID in alphanumeric format.
CMD	CB	2	C	COMMAND	Corresponds to the ACB field command code.
CMDNAME	CB	14	C	CNAME	A translation of the 2-byte Adabas command code to a 14-byte string. For example, the command code BT is translated to "Backout Trans".
CMDRESP	CB	4	B	CMDRSP MCR	The time, in milliseconds, required to process the Adabas call. In the command table, Adabas Review stores the minimum Adabas duration for each command type returning a zero response code. The command table is updated whenever a lower duration value is encountered. Command response time is thus based on the command time field in the Adabas command log. The values for CMDRESP in the history file are automatically stored in seconds. To display them correctly, they must be converted to milliseconds. For more information on this conversion, read Migration from Previous Versions . If you need to continue using the old scale and the old calculation algorithm for history data, contact your Software AG support representative. Due to changes in the display programs in SYSREVDB, you cannot use SYSREVDB in Adabas Review 4.4 (or earlier versions) to display the field contents of CMDRESP correctly, unless you stay with the old scale and algorithm.
CMDRSP	CB	4	B	CMDRESP MCR	Alternate name for CMDRESP.
CMDSTAT	CB	8	C	---	Contains the Adabas internal status for an Adabas command. For example, the Adabas command L3 has an internal status of SIMPLE and S1 has an internal status of COMPLEX.
CMDTYPE	CLOG	1	B	TYPECMD CMD-TYPE	The 1-byte command type field of the Adabas command log record that describes the internal Adabas status for the command. For example, a command type of 01 is a simple command and a command type of 42 is a complex command. The CMDSTAT field provides this translation.
CMD-TYPE	CLOG	1	B	CMDTYPE TYPECMD	Alternate name for CMDTYPE.
CMPRECL	CB	2	B	---	Contains the compressed record length of the record returned by a READ or a FIND command.
CNAME	CB	14	C	CMDNAME	Alternate name for CMDNAME.
COMMAND	CB	2	C	CMD	Alternate name for CMD.
COMMANDS	CB	8	B	---	The number of Adabas commands processed for the control break.
COP1	CB	1	C	OP1	Corresponds to the ACB field command option 1. The contents of this field is determined by the command being issued.
COP2	CB	1	C	OP2	Corresponds to the ACB field command option 2. The contents of this field is determined by the command being issued.
CPUID	OS	8	B	---	The internal identifying serial number of the CPU from which the Adabas call was issued. Note: This field may contain different data when an X'48' call is issued. To avoid such a call in Natural, set Natural parameter ADAMODE=0 (the default value is 2).
CQALLOC	NUC	4	B	---	The number of bytes of command queue space currently used.
CQDATE	NUC	8	C	---	The date (in YYYY-MM-DD format) when the command queue high-water mark was reached.
CQDURA	IT	4	B	---	Command queue duration. Contains the amount of time (in seconds) that a command waited in the command queue before being dispatched into an Adabas thread.
CQENT	NUC	4	B	---	The current number of command queue entries.
CQEUID	TP	28	B	---	Contains the 28-byte Adabas communication user ID for the user who issued the Adabas call. Note: This field may contain different data when an X'48' call is issued. To avoid such a call in Natural, set Natural parameter ADAMODE=0 (the default value is 2).
CQJOB	NUC	8	C	---	The job or started task name for the user obtained from the user's command queue element.
CQMAXENT	NUC	4	B	---	The maximum number of entries that have been in the command queue for the Adabas nucleus session.
CQPCT	NUC	4	B	---	The maximum percentage of command queue space used during the Adabas nucleus session.
CQSIZE	NUC	4	B	---	The total number of bytes of command queue space allocated at Adabas nucleus startup.
CQTIME	NUC	8	B	---	The time (in HH:MM:SS format) when the command queue high-water mark was reached.
CQUQADDR	NUC	8	B	---	The address of the User Queue Element found in the CQE.
CQUSED	NUC	4	B	---	The maximum number of bytes of command queue space used during the Adabas nucleus session.
CURENPGM	TP	8	C	ACINAME	Alternate name for ACINAME.

-D-

Field System Name	Category	Field Length	Format	Alternate Names	Description
DATAIO	CLOG	2	B	DATA-IO	The number of asynchronous Data Storage read I/Os for this command.
DATA-IO	CLOG	2	B	DATAIO	Alternate name for DATAIO.
DATAREAD	I/O	4	B	---	The total number of Adabas Data Storage read I/Os for the Adabas session. This value is updated every minute and not when each command is issued.
DATAWRIT	I/O	4	B	---	The total number of Adabas Data Storage write I/Os for the Adabas session. This value is updated every minute and not when each command is issued.
DATE	IT	8	C	---	The date (in YYYY-MM-DD format) when the Adabas command was processed.
DAY	IT	1	B	---	The day number (within a month) when the Adabas command was processed.
DBID	CB	2	B	---	The unique Adabas database identification number.
DBNAME	NUC	16	C	---	The 16-character name assigned to the database when it was created.
DES	CLOG	2	B	DESUPD	Alternate name for DESUPD.
DESUPD	CLOG	2	B	DES	Contains the number of descriptors that were updated for an Adabas call.
DUR	CLOG	4	B	DURATION DURAT	Alternate name for DURATION.
DURAT	CLOG	4	B	DURATION DUR	Alternate name for DURATION.
DURATION	CLOG	4	B	DURAT DUR	The amount of time that the command spent in the Adabas thread, including time spent waiting for I/O operations to complete. This field is expressed in seconds and is accurate to 4 decimal places. The field ADADURA contains the same value accurate to 6 decimal places.

-E-

Field System Name	Category	Field Length	Format	Alternate Names	Description
ENDDATE	IT	4	T	---	The date (in YYYY-MM-DD format) when the last Adabas command was processed for a user or a job.
ENDTIME	IT	4	T	---	The time (in 24-hour format) when the last Adabas command was processed for a user or a job.
ERRFLDNM	CB	2	C	---	Error field name. Contains the Adabas 2-character name for a field that has been found to be in error in the Adabas format or search buffer.
ETID	TP	8	C	---	The Adabas ET (end transaction) ID that was established during the OP (open) call to Adabas.

-F-

Field System Name	Category	Field Length	Format	Alternate Names	Description
FB	BUF	32	C	---	The contents of the Adabas format buffer if one exists for the Adabas call. When used in a summary report, only the first 32 bytes of this field are displayed. When used in a detail report, the whole format buffer is displayed. The FBSEG`nn` field may be used to display parts of the format buffer if it is more than 32 bytes long. Only one FBSEG`nn` field is allowed for each report.
FBFIELDS	BUF	2	C	FBF	Format buffer fields. Contains the Adabas 2-character name for each field contained in the Adabas format buffer. This field can only be used in Summary reports.
FBL	BUF	2	B	---	Corresponds to the ACB field format buffer length. The contents of this field is determined by the Adabas command issued.
FBSEG`nn`	BUF	64	C	---	Represents a format buffer segment of 64 bytes. The `nn` suffix is the segment number. For example, by specifying the field FBSEG01 you obtain the first 64 bytes of the format buffer. The segment number may be a value between 01 and 32, inclusive. The field FBSEGnn is available for summary reports only; use the field FB for detail reports.
FILE	CB	2	B	FNR (used in summary record)	Corresponds to the ACB field file number. The function of this field is determined by the Adabas command being issued.
FILENAME	NUC	16	C	---	Contains the 16-character name assigned to the Adabas file, and is obtained from the Adabas file control block (FCB). If the file name is not available, the field contains "FCB-UNAVAILABLE".
FILETYPE	NUC	6	C	---	Contains the 6-character type assigned to the Adabas file. This field contains the string "USER" if the file is a user file or "SYSTEM" if the Adabas Checkpoint file was read or updated.
FNR	CB	2	B	FILE	This name is used in the schema portion of the summary record. It is an alternate name for FILE.
FORMATOW	NUC	4	B	---	The total number of Adabas internal format overwrites that have occurred during the Adabas nucleus session.
FORMATTR	NUC	4	B	---	The total number of Adabas internal format translations that have occurred during the Adabas nucleus session.
FULLSTCK	IT	8	T	---	The 8-byte store clock value taken when the Adabas command was processed.

-G-

Field System Name	Category	Field Length	Format	Alternate Names	Description
GLOBFMID	CB	8	B	---	Contains the global internal format buffer ID for the Adabas call within a sequence of Adabas calls. This field is derived from ADDIT5 field.

-H-

Field System Name	Category	Field Length	Format	Alternate Names	Description
HOLDISN	NUC	2	B	---	The numbers of ISNs which are in HOLD status by the user at the time this command is executed. The number is obtained after the execution of this command.
HOUR	IT	5	C	HR	The hour (in 24-hour format) when the Adabas command was processed.
HQDATE	NUC	8	C	---	The date (in YYYY-MM-DD format) that the hold queue high-water mark was reached.
HQENT	NUC	4	B	---	The current number of hold queue entries.
HQPCT	NUC	4	B	---	The maximum percentage of hold queue space used during the Adabas nucleus session.
HQSIZE	NUC	4	B	---	The total number of bytes allocated to the hold queue at Adabas nucleus startup.
HQTIME	NUC	8	C	---	The time (in HH:MM:SS format) that the hold queue high-water mark was reached.
HQUSED	NUC	4	B	---	The maximum number of bytes of hold queue space used during the Adabas nucleus session.
HQUSRENT	NUC	4	B	---	The number of hold queue user entries.
HR	IT	5	C	HOUR	Alternate name for HOUR.

-I-

Field System Name	Category	Field Length	Format	Alternate Names	Description
IB	BUF	32	C	---	The contents of the Adabas ISN buffer if one exists for the Adabas call. When used in a summary report, only the first 32 bytes of this field are displayed. When used in a detail report, the whole ISN buffer is displayed. The IBSEG`nn` field may be used to display parts of the ISN buffer if it is more than 32 bytes long.
IBL	BUF	2	B	---	Corresponds to the ACB field ISN buffer length. The use of this field is determined by the command being issued.
IBSEG`nn`	BUF	64	C	---	Represents an ISN buffer segment of 64 bytes. The `nn` suffix is the segment number. For example, by specifying the field IBSEG01, you obtain the first 64 bytes of the ISN buffer. The segment number may be a value between 01 and 32, inclusive. The field IBSEGnn is available for summary reports only; use the field IB for detail reports.
IO	I/O	2	B	IOS	This name is used in the schema portion of the summary record. It is an alternate name for IOS.
IOS	I/O	2	B	IO (used in summary record)	The total number of I/Os for the command processed; it is the sum of ASSOIO, DATAIO and WORKIO.
IOCOMP	I/O	3	C	---	Identifies the Adabas component against which the I/O was issued. For example, if the I/O is issued against Data Storage extent 1, the field contains DS1. If the I/O is issued against address converter extent 3, the field contains AC3.
IOFUNC	I/O	5	C	---	The type of I/O operation performed against an Adabas component. The values for this field are "READ" or "WRITE".
IOLIST	I/O	10	C	---	The hexadecimal I/O list for a command obtained from the Adabas command log record. Four bytes are allocated for each I/O list entry.
IOPHYS	I/O	16	C	---	A translation of the I/O list entry from the Adabas command log record. The format for this field is `comp-x nnnnnn`, where: `comp` is the Adabas component (ASSO, DATA, or WORK) `x` is the type of I/O, ("R" for read or "W" for write) `nnnnnn` is the RABN (relative Adabas block number)
IORABN	I/O	8	C	---	The relative Adabas block number against which the I/O was performed.
IOTOCMD	I/O	4	B	---	The ratio of the total number of I/O operations performed to the total number of commands processed.
IOTYPE	I/O	4	C	---	Identifies the component against which the I/O operation was performed. Values for this field may be ASSO 'Associator', DATA 'Data Storage', or WORK 'Work data set'.
IOVOLSER	I/O	6	C	---	Contains the volume serial number against which the I/O operation was performed. This field may be used to show Adabas I/O distribution.
ISN	CB	4	B	---	Corresponds to the ACB field ISN. The use of this field is determined by the command being issued.
ISNLL	CB	4	B	---	Corresponds to the ACB field ISN lower limit. The field contains the lowest ISN that Adabas returns when retrieving ISN lists. The use of this field is determined by the command being issued. Note: This field could be misinterpreted when used at the OP command, since the value of ISNLL as well as ISNQ are used for purposes other than the ISN lower limit or ISN quantity. Please refer to the Adabas Command Reference manual for further information.
ISNQ	CB	4	B	---	Corresponds to a modification of the ACB field ISN quantity. The field is modified based on command type, and is suitable for performing mathematical calculations such as SUM and AVERAGE. The unmodified data can be found in the ORGISNQ field. Note: This field could be misinterpreted when used at the OP command, since the value of ISNQ as well as ISNLL are used for purposes other than the ISN lower limit or ISN quantity. Please refer to the Adabas Command Reference manual for further information.

-J-

Field System Name	Category	Field Length	Format	Alternate Names	Description
JMREDATE	OS	10	C	---	The date (in YYYY-MM-DD format) when the batch job was entered in JES or from the job information macro.
JOB	OS	8	C	JOBNAME	Alternate name for JOBNAME.
JOBCLASS	OS	1	B	---	(z/OS only) The one-byte character of the CLASS parameter in the job card.
JOBID	OS	8	C	---	A combination of the job identifier and the job number of the user who issued the Adabas call. This field is available under z/OS and z/VSE: Under z/OS, the field will contain JOB, STC, or TSU as the job identifier followed by a 5-byte JES job number. Under z/VSE, the field will contain JOB as the identifier, followed by the 5-byte POWER job number.
JOBNAME	OS	8	C	JOB	The name of the job or task from which the Adabas call was issued. This field is the contents of the JOBNAME from the Adabas command log record and may not reflect the actual JOBNAME of the task that issued the Adabas call.
JOBNUM	OS	5	C	---	The job number of the user who issued the Adabas call. This field is available under z/OS and z/VSE. The field will contain an alphanumeric, 5-byte value for the JES (z/OS) or POWER (z/VSE) job number.

-L-

Field System Name	Category	Field Length	Format	Alternate Names	Description
LEVEL	NAT	2	B	NATLEVEL	Alternate name for NATLEVEL.
LFPALLOC	NUC	4	B	---	The number of bytes currently used in the format pool.
LFPENT	NUC	4	B	---	The current number of entries in the format pool.
LFPMAX	NUC	4	B	---	The maximum number of bytes of format pool space used during the Adabas nucleus session.
LFPPCT	NUC	4	B	---	The maximum percentage of format pool space used during the Adabas nucleus session.
LFPSIZE	NUC	4	B	---	The total number of bytes allocated to the format pool at Adabas nucleus startup.
LFPUSED	NUC	4	B	---	The maximum number of bytes of format pool space used during the Adabas nucleus session.
LIB	NAT	8	C	NATLIB	Alternate name for NATLIB.
LOG	NAT	8	C	NATAPPL LOGON	This name is used in the schema portion of the summary record. It is an alternate name for NATAPPL.
LOGON	NAT	8	C	NATAPPL LOG (used in summary record)	Alternate name for NATAPPL.
LPARNAME	OS	8	C	---	The system LPAR or partition name (in z/OS or z/VSE environments) or the environment name from the job information macro (in BS2000 environments).
LUNAME	OS	8	C	---	The VTAM LU (logical unit) name of the user who issued the Adabas call. If the TP system is Com-plete, the LUNAME field contains the Com-plete ID: The first 3 bytes of the ID represent the Com-pass stack level The fourth byte is the Com-plete patch character The last 4 bytes identify the Com-plete terminal ID number in hexadecimal format. Note: This field may contain different data when an X'48' call is issued. To avoid such a call in Natural, set Natural parameter ADAMODE=0 (the default value is 2).
LWPALLOC	NUC	4	B	---	The number of bytes of the work pool currently in use.
LWPENT	NUC	4	B	---	The current number of work pool entries.
LWPMAX	NUC	4	B	---	The maximum number of bytes of work pool space used during the Adabas nucleus session.
LWPMXENT	NUC	4	B	---	The maximum number of work pool entries used during the Adabas nucleus session.
LWPPCT	NUC	4	B	---	The maximum percentage of work pool space used during the Adabas nucleus session.
LWPSIZE	NUC	4	B	---	The number of bytes that were allocated to the work pool at Adabas nucleus startup.
LWPUSED	NUC	4	B	---	The maximum number of bytes of work pool space used during the Adabas nucleus session.

-M-

Field System Name	Category	Field Length	Format	Alternate Names	Description
M15	IT	5	C	15M	Alternate name for 15M.
M5	IT	5	C	5M	Alternate name for 5M.
MCR	CB	4	B	CMDRESP CMDRSP	Alternate name for CMDRESP.
MIN	IT	5	C	1M MINUTE	Alternate name for 1M.
MINUTE	IT	5	C	1M MIN	Alternate name for 1M.
MO	IT	1	B	MONTH MON	Alternate name for MONTH.
MON	IT	1	B	MON MO	Alternate name for MONTH.
MONAME	IT	3	C	---	The name of the month when the Adabas command was processed.
MONTH	IT	1	B	MON MO	The number of the month when the Adabas command was processed.

-N-

Field System Name	Category	Field Length	Format	Alternate Names	Description
NATAPPL	NAT	8	C	LOGON LOG (used in summary record)	The Natural application name (or library) to which the user issued a LOGON. This field does not necessarily show the library of the Natural object from which the Adabas call is issued. Under SQL, this field contains the library name.
NATCLTID	NAT	8	C	---	NATCLTID displays the client user ID of a user using a Natural server. NATCLTID only contains a value if an RPC client request is executed in a Natural RPC server session. In all other cases the field is empty.
NATCOUNT	NAT	2	B	---	The total number of Adabas calls generated by the user application since the last terminal I/O.
NATEXEC	NAT	2	B	---	The number of times a Natural object that issues Adabas calls has been executed. NATCOUNT is "1" if the Natural object has issued an Adabas call for the first time on this level; value is zero otherwise.
NATGRP	NAT	8	C	---	The current Natural security group to which the user belongs.
NATLEVEL	NAT	2	B	LEVEL	The Natural call level of the Natural program issuing the Adabas call. For example, a CALLNAT routine that is called from a program and issues an Adabas call has a Natural level of 2.
NATLIB	NAT	8	C	LIB	The name of the Natural library where the object is located that is currently executed.
NATPROG	NAT	8	C	PROGRAM PRO (used in summary record)	The name of the Natural program that issued the Adabas call. When Natural internally issues Adabas calls to load Natural objects, this value is not updated. Under SQL, this field contains the program name.
NATRPCID	NAT	16	C	---	The 16-byte alphanumeric value for the store clock value used as identification of the Natural RPC Server.
NATRPCCO	NAT	16	C	---	The 16-byte alphanumeric value of the conversation ID from the Natural RPC Server.
NATSTMT	NAT	4	C	---	The Natural statement number for the Adabas command processed. This field is derived from the Adabas command ID (CID).
NATUID	NAT	8	C	---	The name of the Natural library to which the user is currently logged on. This is the value of the Natural system variable *APPLIC-ID.
NUCID	NUC	3	B	SMP (used in summary record)	The ID of an Adabas nucleus in an Adabas Parallel Services or Adabas Cluster Services environment.

-O-

Field System Name	Category	Field Length	Format	Alternate Names	Description
OP1	CB	1	C	COP1	Alternate name for COP1.
OP2	CB	1	C	COP2	Alternate name for COP2.
OPSYSID	OS	4	B	---	The operating system ID. The address of the ASCB (address space control block) for the job or task that issued the Adabas call. Note: This field may contain different data when an X'48' call is issued. To avoid such a call in Natural, set Natural parameter ADAMODE=0 (the default value is 2).
OPSYSNAM	OS	8	C	---	The operating system name (SYSNAME) that is specified in the SYS1.PARMLIB and which will be obtained from the CVT (in z/OS environments) or the operating system name and version number (in BS2000 environments).
ORGDURA	CLOG	4	B	---	The (original) value of the "duration" field contained in the command log record. The time is expressed in units of 16 microseconds.

-P-

Field System Name	Category	Field Length	Format	Alternate Names	Description
PRI	CLOG	1	B	PRIORITY PRIO	Alternate name for PRIORITY.
PRIO	CLOG	1	B	PRIORITY PRI	Alternate name for PRIORITY.
PRIORITY	CLOG	1	B	PRI PRIO	The operating system priority for the user issuing the Adabas call.
PRO	NAT	8	C	NATPROG PROGRAM	This name is used in the schema portion of the summary record. It is an alternate name for NATPROG.
PROGRAM	NAT	8	C	NATPROG PRO (used in summary record)	Alternate name for NATPROG.

-Q-

Field System Name	Category	Field Length	Format	Alternate Names	Description
QTR	IT	1	B	QUARTER QUAR	Alternate name for QUARTER.
QUAR	IT	1	B	QUARTER QTR	Alternate name for QUARTER.
QUARTER	IT	1	B	QUAR QTR	The quarter of the year in which the Adabas command was processed.

-R-

Field System Name	Category	Field Length	Format	Alternate Names	Description
RB	BUF	32	C	---	The contents of the Adabas record buffer if one exists for the Adabas call. When used in a summary report, only the first 32 bytes of this field are displayed. When used in a detail report, the whole record buffer is displayed. The RBSEG`nn` field may be used to display parts of the record buffer if it is more than 32 bytes long.
RBL	BUF	2	B	---	Corresponds to the ACB field record buffer length. The record buffer is used primarily with read, search, and update commands.
RBSEG`nn`	BUF	64	C	---	Represents a record buffer segment of 64 bytes. The `nn` suffix is the segment number. For example, by specifying the field RBSEG01, you obtain the first 64 bytes of the record buffer. The segment number may be a number between 01 and 32, inclusive. The field RBSEGnn is available for summary reports only; use the field RB for detail reports.
RESPONSE	CB	2	B	RSP (used in summary record) RC	Corresponds to the ACB field response code. A response code of 0 indicates that the command executed successfully.
ROUTTIME	OS	8	B	---	The amount of time between the time a command was issued by the application and the time it was queued in the Adabas command queue. For Adabas 8.1 and earlier, this field is expressed in seconds; for Adabas 8.2 and later releases, this field is expressed in milliseconds.
RSP	CB	2	B	RESPONSE	This name is used in the schema portion of the summary record. It is an alternate name for RESPONSE.
RSPSUB	CB	4	B	---	Contains the Adabas response code subcode from the ACB field Additions 2 or the ACBX field ACBXERRC for certain nonzero Adabas response codes.

-S-

Field System Name	Category	Field Length	Format	Alternate Names	Description
SB	BUF	32	C	---	The contents of the Adabas search buffer if one exists for the Adabas call. When used in a summary report, only the first 32 bytes of this field are displayed. When used in a detail report, the whole search buffer is displayed. The SBSEG`nn` field may be used to display parts of the search buffer if it is more than 32 bytes long.
SBFIELDS	BUF	2	C	---	Search buffer fields. Contains the Adabas 2-character field name for each field contained in the Adabas search buffer. This field can only be used in Summary reports.
SBL	BUF	2	B	---	Corresponds to the ACB field search buffer length.
SBSEG`nn`	BUF	64	C	---	Represents a search buffer segment of 64 bytes. The `nn` suffix is the segment number. For example, by specifying the field SBSEG01, you obtain the first 64 bytes of the search buffer. The segment number may be a number between 01 and 32, inclusive. The field SBSEGnn is available for summary reports only; use the field SB for detail reports.
SECGID	TP	8	C	---	Contains the security system group ID for the user who issued the Adabas call. This field is available under z/OS when the user is running with an external security system (RACF, ACF2, or Top Secret).
SECUID	TP	8	C	---	Contains the security system user ID for the user who issued the Adabas call. This field is available under z/OS when the user is running with an external security system (RACF, ACF2, or Top Secret).
SEQ	CLOG	4	B	SEQUENCE	Alternate name for SEQUENCE.
SEQUENCE	CLOG	4	B	SEQ	The Adabas command sequence number. The value is incremented by one for each Adabas command processed.
SMP	NUC	3	B	NUCID	This name is used in the schema portion of the summary record. It is an alternate name for NUCID.
SRCHTYPE	CLOG	8	C	---	The type of search or search algorithm. If this field contains the value 'NONDES', a nondescriptor search occurred.
STEPNAME	OS	8	C	---	The name of the job step or task step that issued the Adabas call. This step is only available in z/OS environments.
STRTDATE	IT	4	T	---	The date (in YYYY-MM-DD format) when the first Adabas command was processed within the current report control break.
STRTTIME	IT	4	T	---	The time (in 24-hour format) when the first Adabas command was processed within the current report control break.
SVC	NUC	1	B	---	The Adabas SVC (supervisor call) number used for interregion communication between the user's address space and the Adabas nucleus address space.
SYSCMD	NUC	4	B	---	The number of Adabas system commands that have been executed. Adabas system commands execute in Adabas threads 0 and -1.

-T-

Field System Name	Category	Field Length	Format	Alternate Names	Description
THD	CLOG	1	B	THREAD	Alternate name for THREAD.
THDNUM	NUC	4	B	---	The number of 8K Adabas threads in the nucleus. The number includes the two Adabas system threads (threads 0 and -1).
THREAD	CLOG	1	B	THD	The Adabas thread number in which the Adabas command was processed.
THREADSW	NUC	4	B	---	The number of thread switches that have occurred during the Adabas nucleus session.
THROWBKS	NUC	4	B	---	The number of command throwbacks that have occurred during the Adabas nucleus session. Throwbacks occur when the record you wish to retrieve has been placed on hold by another user. The command you issued is placed on the command queue ("thrown back") for reprocessing.
TIALLOC	NUC	4	B	---	The number of bytes of LI (ISN list table) space currently used.
TID	TP	2	B	---	The Com-plete terminal ID number of the user who issued the Adabas call.
TIDATE	NUC	8	C	---	The date (in YYYY-MM-DD format) when the LI (ISN list table) high-water mark was reached.
TIENT	NUC	4	B	---	The current number of entries used in the LI (ISN list table).
TIME	IT	8	C	---	The time (in 24-hour format) when the first Adabas call was processed.
TIPCT	NUC	4	B	---	The maximum percentage of LI (ISN list table) space used during the Adabas nucleus session.
TISIZE	NUC	4	B	---	The number of bytes allocated to the LI (ISN list table) at Adabas nucleus startup.
TITIME	NUC	8	C	---	The time (in HH:MM:SS format) that the LI (ISN list table) high-water mark was reached.
TIUSED	NUC	4	B	---	The maximum number of bytes of LI (ISN list table) space used during the Adabas nucleus session.
TOTALCMD	NUC	4	B	---	The total number of Adabas system and user commands that have been processed during the Adabas nucleus session.
TOTALIOS	I/O	4	B	---	Contains the total number of I/Os performed against all Adabas components for the Adabas session; the sum of ASSOREAD, ASSOWRIT, DATAREAD, DATAWRIT, WORKREAD, and WORKWRIT. This value is updated every minute and not when each command is issued.
TOTDURA	IT	4	B	---	Total duration. Contains the amount of time the command was in the Adabas thread plus the amount of time the command waited in the command queue. The TOTDURA field is the sum of the ADADURA and CQDURA field values expressed in seconds.
TPTRANCT	TP	4	B	---	A transaction count field. Possible values for this field are either "1" or "0" (zero). A transaction is started with a TP terminal read and completed with a TP terminal write. For the first command of a transaction by a user, this field is set to "1". For all subsequent calls of the same transaction for the same user, this field is set to "0". This field is most useful as a SUM field in conjunction with the field TRANSID. Used in this manner, you can determine the work rate per transaction.
TPTRANNM	TP	4	B	---	The transaction number as established by the user's TP system for the transaction that issued the Adabas call.
TPUSER	TP	8	C	TPUSERID	Alternate name for TPUSERID.
TPUSERID	TP	8	C	TPUSER	The user ID on the TP monitor from which the Adabas call was issued.
TRANSID	TP	8	C	---	The name of the root transaction or program that issued the Adabas call.
TRUENAME	TP	8	C	---	The name of the Adabas CICS link routine TRUE exit.
TSALLOC	NUC	4	B	---	The number of bytes in the LQ (table of sequential commands) currently being used.
TSDATE	NUC	8	C	---	The date (in YYYY-MM-DD format) when the LQ (table of sequential commands) high-water mark was reached.
TSENT	NUC	4	B	---	The current number of entries in the LQ (table of sequential commands).
TSPCT	NUC	4	B	---	The maximum percentage of LQ (table of sequential commands) space used during the Adabas nucleus session.
TSSIZE	NUC	4	B	---	The number of bytes allocated to the LQ (table of sequential commands) at Adabas nucleus startup.
TSTIME	NUC	8	C	---	The time (in HH:MM:SS format) when the LQ (table of sequential commands) high-water mark was reached.
TSUSED	NUC	4	B	---	The maximum number of bytes used in the LQ (table of sequential commands) during the Adabas nucleus session.
TYPECMD	CLOG	1	B	CMDTYPE CMD-TYPE	Alternate name for CMDTYPE.

-U-

Field System Name	Category	Field Length	Format	Alternate Names	Description
UBUID	TP	8	C	---	Contains the last 8 bytes of the 28-byte Adabas communication ID (CQEUID) for the user who issued the Adabas call. Note: This field may contain different data when an X'48' call is issued. To avoid such a call in Natural, set Natural parameter ADAMODE=0 (the default value is 2).
UCMPRECL	CB	2	B	---	Uncompressed record length. The uncompressed length of the Adabas format or search buffer field.
UOWID	TP	8	C	---	Contains the instance number and the sequence number of the CICS field NETUOWID, which is 27 bytes long. This field can only be filled in by CICS. The evaluation of this field requires a large amount of CPU time and, therefore, can only be activated by a special ZAP. Following is a description of the bytes in NETUOWID: Offset 0 (Length 1): The length (L) of the Logical-Unit-of-Work-Identifier-Field, not including this field. The NETUOWID contains Logical-Unit-of-Work-Identifier-Field plus padding bytes. Values: 0 or 10 < = L < = 26. Offset 1 (Length 1): The length of Network Name, not including this field, m = L - 9 , 1 < = m < = 17. Offset 2 (Length m): Network name, format: ABCDEFGH.ABCDEFGH, Networkid.Luname. Offset m + 2 (Length 6): Instance number. Offset m + 2 + 6 (Length 2): Sequence number. Offset m + 2 + 6 + 2 (Length until 27): Residual data.
UQALLOC	NUC	4	B	---	The number of bytes of user queue space currently in use.
UQDATE	NUC	8	C	---	The date (in YYYY-MM-DD) format when the user queue high-water mark was reached.
UQENT	NUC	4	B	---	The current number of user queue entries.
UQPCT	NUC	4	B	---	The maximum percentage of user queue space used during the Adabas nucleus session.
UQSIZE	NUC	4	B	---	The number of bytes allocated to the user queue at Adabas nucleus startup.
UQTIME	NUC	8	C	---	The time (in HH:MM:SS format) when the user queue high-water mark was reached.
UQUID	TP	4	B	---	Contains the unique 4-byte UQE (user queue element) user ID for the user who issued the Adabas call. This value is allocated in numerically ascending sequence for each UQE allocated by the Adabas nucleus.
UQUSED	NUC	4	B	---	The maximum number of bytes of user queue space ever used.
USERCMD	NUC	4	B	---	The total number of Adabas commands issued by users and processed during the Adabas nucleus session.
USERFLD1	UF	user-defined	user-defined	---	An Adabas Review user field, containing user-specified data for reports.
USERFLD2	UF	user-defined	user-defined	---	An Adabas Review user field, containing user-specified data for reports.
USERFLD3	UF	user-defined	user-defined	---	An Adabas Review user field, containing user-specified data for reports.
USERFLD4	UF	user-defined	user-defined	---	An Adabas Review user field, containing user-specified data for reports.
USERFLD5	UF	user-defined	user-defined	---	An Adabas Review user field, containing user-specified data for reports.
USERID	CLOG	28	B	USER-ID	The 28-byte Adabas communication ID of the user for whom the command was processed.
USER-ID	CLOG	28	B	USERID	Alternate name for USERID.
USERTYPE	TP	8	C	---	The type of TP system from which the Adabas call was issued. For example, if the Adabas call was issued from a CICS session, the USERTYPE field contains "CICS".

-V-

Field System Name	Category	Field Length	Format	Alternate Names	Description
VB	BUF	32	C	---	The contents of the Adabas value buffer if one exists for the Adabas call. When used in a summary report, only the first 32 bytes of this field are displayed. When used in a detail report, the whole value buffer is displayed. The VBSEG`nn` field may be used to display parts of the value buffer if it is more than 32 bytes long.
VBL	BUF	2	B	---	Corresponds to the ACB field value buffer length field. The value buffer contains the value used in search commands.
VBSEG`nn`	BUF	64	C	---	Represents a value buffer segment of 64 bytes. The `nn` suffix is the segment number. For example, by specifying the field VBSEG01, you obtain the first 64 bytes of the value buffer. The segment number may be a number between 01 and 32, inclusive. The field VBSEG`nn` is available for summary reports only; use the field VB for detail reports.

Field System Name

-W-

Field System Name	Category	Field Length	Format	Alternate Names	Description
WEEK	IT	1	B	WK	The week number of the week in which the Adabas command was processed.
WEEKDAY	IT	3	C	WEEK-DAY	The name of the day on which the Adabas command was processed.
WEEK-DAY	IT	3	C	WEEKDAY	Alternate name for WEEKDAY.
WK	IT	1	B	WEEK	Alternate name for WEEK.
WORKIO	CLOG	2	B	WORK-IO	The number of I/O operations performed against the Adabas Work data set for this command.
WORK-IO	CLOG	2	B	WORKIO	Alternate name for WORKIO.
WORKREAD	I/O	4	B	---	Contains the total number of Work read I/O operations performed during the Adabas session. This value is updated every minute and not when each command is issued.
WORKWRIT	I/O	4	B	---	The total number of Work write I/O operations performed during the Adabas session. This value is updated every minute and not when each command is issued.

-Y-

Field System Name	Category	Field Length	Format	Alternate Names	Description
YEAR	IT	1	B	YR	The year (in YYYY format) in which the Adabas command was processed.
YR	IT	1	B	YEAR	Alternate name for YEAR.

-Number-

Field System Name	Category	Field Length	Format	Alternate Names	Description
1M	IT	5	C	MINUTE MIN	Establishes 1-minute intervals for the collection of Adabas data.
5M	IT	5	C	M5	Establishes 5-minute intervals for the collection of Adabas data.
15M	IT	5	C	M15	Establishes 15-minute intervals for the collection of Adabas data.

Adabas Control Block Fields (CB)

Fields in this category are derived from the Adabas control block (ACB). Refer to the Adabas Command Reference Guide supplied with your version of Adabas for more information.

Field System Name	Field Length	Format	Alternate Names	Description
ACBUSER	4	B	---	This field, comprising the last four bytes of the ACB, contains user data that is passed with the Adabas call. It is referred to as the user area field in the ACB, and is neither used nor modified by Adabas.
AD1	8	B	ADD1 ADDIT1	Alternate name for ADDIT1.
AD2	4	B	ADD2 ADDIT2	Alternate name for ADDIT2.
AD3	8	B	ADD3 ADDIT3	Alternate name for ADDIT3.
AD4	8	B	ADD4 ADDIT4	Alternate name for ADDIT4.
AD5	8	B	ADD5 ADDIT5	Alternate name for ADDIT5.
ADD1	8	B	AD1 ADDIT1	This name is used in the schema portion of the summary record. It is an alternate name for ADDIT1.
ADD2	4	B	AD2 ADDIT2	This name is used in the schema portion of the summary record. It is an alternate name for ADDIT2.
ADD3	8	B	AD3 ADDIT3	This name is used in the schema portion of the summary record. It is an alternate name for ADDIT3.
ADD4	8	B	AD4 ADDIT4	This name is used in the schema portion of the summary record. It is an alternate name for ADDIT4.
ADD5	8	B	AD5 ADDIT5	This name is used in the schema portion of the summary record. It is an alternate name for ADDIT5.
ADDIT1	8	B	ADD1 (used in summary record) AD1	Corresponds to the ACB field additions 1. The command to be executed determines whether this field is used and what the contents represent.
ADDIT2	4	B	ADD2 (used in summary record) AD2	Corresponds to the ACB field additions 2. The command to be executed determines whether this field is used and what the contents represent. When ADARUN parameter CLOGLAYOUT is set to 8, the content of this field is taken from the ACBX structure. Note that there are differences in meaning of the Additions 2 field in the ACBX and in the ACB. In the ACBX, some information that was formally available in the ACB is no longer available. For example, the error-related subcode information that was originally provided in the Additions 2 in the ACB is now no longer provided in the ACBX control block structure; instead, the subcode is provided in the Adabas ACBXSUBS (Subcomponent Response Subcode) field. Therefore, in Adabas Review, if the ADARUN parameter CLOGLAYOUT is set to 8, you will find the information from the older ACB structure in the following separate Adabas Review fields: CMPRECL contains the compressed record length. ERRFLDNM contains the error field name. RSPSUB contains the subcode for an Adabas response code. UCMPREL contains the uncompressed record length.
ADDIT3	8	B	ADD3 (used in summary record) AD3	Corresponds to the ACB field additions 3. The command to be executed determines whether this field is used and what the contents represent.
ADDIT4	8	B	ADD4 (used in summary record) AD4	Corresponds to the ACB field additions 4. The command to be executed determines whether this field is used and what the contents represent.
ADDIT5	8	B	ADD5 (used in summary record) AD5	Corresponds to the ACB field additions 5. The command to be executed determines whether this field is used and what the contents represent.
CID	8	C	---	Corresponds to the hexadecimal value of the ACB field command ID. This field serves important functions, determined by the command, during command execution. For example, during a sequential read, the command ID is used to return the records to the user in the proper sequence. This field displays the value of the CID in hexadecimal format (for example, if CID=ABCD, it is displayed in this field as "C1C2C3C4").
CIDALPHA	4	C	---	Corresponds to the alphanumeric value of the ACB field command ID. This field serves important functions, determined by the command, during command execution. For example, during a sequential read, the command ID is used to return the records to the user in the proper sequence. This field displays the value of the CID in alphanumeric format.
CMD	2	C	COMMAND	Corresponds to the ACB field command code.
CMDNAME	14	C	CNAME	A translation of the 2-byte Adabas command code to a 14-byte string. For example, the command code BT is translated to "Backout Trans".
CMDRESP	4	B	CMDRSP MCR	The time, in milliseconds, required to process the Adabas call. In the command table, Adabas Review stores the minimum Adabas duration for each command type returning a zero response code. The command table is updated whenever a lower duration value is encountered. Command response time is thus based on the command time field in the Adabas command log. The values for CMDRESP in the history file are automatically stored in seconds. To display them correctly, they must be converted to milliseconds. For more information on this conversion, read Migration from Previous Versions . If you need to continue using the old scale and the old calculation algorithm for history data, contact your Software AG support representative. Due to changes in the display programs in SYSREVDB, you cannot use SYSREVDB in Adabas Review 4.4 (or earlier versions) to display the field contents of CMDRESP correctly, unless you stay with the old scale and algorithm.
CMDRSP	4	B	CMDRESP MCR	Alternate name for CMDRESP.
CMDSTAT	8	C	---	Contains the Adabas internal status for an Adabas command. For example, the Adabas command L3 has an internal status of SIMPLE and S1 has an internal status of COMPLEX.
CMPRECL	2	B	---	Contains the compressed record length of the record returned by a READ or a FIND command.
CNAME	14	C	CMDNAME	Alternate name for CMDNAME.
COMMAND	2	C	CMD	Alternate name for CMD.
COMMANDS	8	B	---	The number of Adabas commands processed for the control break.
COP1	1	C	OP1	Corresponds to the ACB field command option 1. The contents of this field is determined by the command being issued.
COP2	1	C	OP2	Corresponds to the ACB field command option 2. The contents of this field is determined by the command being issued.
DBID	2	B	---	The unique Adabas database identification number.
ERRFLDNM	2	C	---	Error field name. Contains the Adabas 2-character name for a field that has been found to be in error in the Adabas format or search buffer.
FILE	2	B	FNR (used in summary record)	Corresponds to the ACB field file number. The function of this field is determined by the Adabas command being issued.
FNR	2	B	FILE	This name is used in the schema portion of the summary record. It is an alternate name for FILE.
GLOBFMID	8	B	---	Contains the global internal format buffer ID for the Adabas call within a sequence of Adabas calls. This field is derived from ADDIT5 field.
ISN	4	B	---	Corresponds to the ACB field ISN. The use of this field is determined by the command being issued.
ISNLL	4	B	---	Corresponds to the ACB field ISN lower limit. The field contains the lowest ISN that Adabas returns when retrieving ISN lists. The use of this field is determined by the command being issued. Note: This field could be misinterpreted when used at the OP command, since the value of ISNLL as well as ISNQ are used for purposes other than the ISN lower limit or ISN quantity. Please refer to the Adabas Command Reference manual for further information.
ISNQ	4	B	---	Corresponds to a modification of the ACB field ISN quantity. The field is modified based on command type, and is suitable for performing mathematical calculations such as SUM and AVERAGE. The unmodified data can be found in the ORGISNQ field. Note: This field could be misinterpreted when used at the OP command, since the value of ISNQ as well as ISNLL are used for purposes other than the ISN lower limit or ISN quantity. Please refer to the Adabas Command Reference manual for further information.
MCR	4	B	CMDRESP CMDRSP	Alternate name for CMDRESP.
OP1	1	C	COP1	Alternate name for COP1.
OP2	1	C	COP2	Alternate name for COP2.
RESPONSE	2	B	RSP (used in summary record) RC	Corresponds to the ACB field response code. A response code of 0 indicates that the command executed successfully.

RSP	2	B	RESPONSE	This name is used in the schema portion of the summary record. It is an alternate name for RESPONSE.
RSPSUB	4	B	---	Contains the Adabas response code subcode from the ACB field Additions 2 or the ACBX field ACBXERRC for certain nonzero Adabas response codes.
UCMPRECL	2	B	---	Uncompressed record length. The uncompressed length of the Adabas format or search buffer field.

Adabas Command Log Fields (CLOG)

Field System Name	Field Length	Format	Alternate Names	Description
ASSOIO	2	B	ASSO-IO	The number of asynchronous Associator read I/Os for this command.
ASSO-IO	2	B	ASSOIO	Alternate name for ASSOIO.
CALLTYPE	8	C	---	Contains the type of the Adabas call that was issued. Possible values are: "PHYSICAL": indicates a standard Adabas call "REMOTE": indicates a call arriving via Entire Net-Work.
CMDTYPE	1	B	TYPECMD CMD-TYPE	The 1-byte command type field of the Adabas command log record that describes the internal Adabas status for the command. For example, a command type of 01 is a simple command and a command type of 42 is a complex command. The CMDSTAT field provides this translation.
CMD-TYPE	1	B	CMDTYPE TYPECMD	Alternate name for CMDTYPE.
DATAIO	2	B	DATA-IO	The number of asynchronous Data Storage read I/Os for this command.
DATA-IO	2	B	DATAIO	Alternate name for DATAIO.
DES	2	B	DESUPD	Alternate name for DESUPD.
DESUPD	2	B	DES	Contains the number of descriptors that were updated for an Adabas call.
DUR	4	B	DURATION DURAT	Alternate name for DURATION.
DURAT	4	B	DURATION DUR	Alternate name for DURATION.
DURATION	4	B	DURAT DUR	The amount of time that the command spent in the Adabas thread, including time spent waiting for I/O operations to complete. This field is expressed in seconds and is accurate to 4 decimal places. The field ADADURA contains the same value accurate to 6 decimal places.
ORGDURA	4	B	---	The (original) value of the "duration" field contained in the command log record. The time is expressed in units of 16 microseconds.
PRI	1	B	PRIORITY PRIO	Alternate name for PRIORITY.
PRIO	1	B	PRIORITY PRI	Alternate name for PRIORITY.
PRIORITY	1	B	PRI PRIO	The operating system priority for the user issuing the Adabas call.
SEQ	4	B	SEQUENCE	Alternate name for SEQUENCE.
SEQUENCE	4	B	SEQ	The Adabas command sequence number. The value is incremented by one for each Adabas command processed.
SRCHTYPE	8	C	---	The type of search or search algorithm. If this field contains the value 'NONDES', a nondescriptor search occurred.
THD	1	B	THREAD	Alternate name for THREAD.
THREAD	1	B	THD	The Adabas thread number in which the Adabas command was processed.
TYPECMD	1	B	CMDTYPE CMD-TYPE	Alternate name for CMDTYPE.
USERID	28	B	USER-ID	The 28-byte Adabas communication ID of the user for whom the command was processed.
USER-ID	28	B	USERID	Alternate name for USERID.
WORKIO	2	B	WORK-IO	The number of I/O operations performed against the Adabas Work data set for this command.
WORK-IO	2	B	WORKIO	Alternate name for WORKIO.

Adabas Buffer Fields (BUF)

Note:
The data in the buffers may be meaningless if the Adabas response code is not zero.

Field System Name	Field Length	Format	Alternate Names	Description
FB	32	C	---	The contents of the Adabas format buffer if one exists for the Adabas call. When used in a summary report, only the first 32 bytes of this field are displayed. When used in a detail report, the whole format buffer is displayed. The FBSEG`nn` field may be used to display parts of the format buffer if it is more than 32 bytes long. Only one FBSEG`nn` field is allowed for each report.
FBFIELDS	2	C	FBF	Format buffer fields. Contains the Adabas 2-character name for each field contained in the Adabas format buffer. This field can only be used in Summary reports.
FBL	2	B	---	Corresponds to the ACB field format buffer length. The contents of this field is determined by the Adabas command issued.
FBSEG`nn`	64	C	---	Represents a format buffer segment of 64 bytes. The `nn` suffix is the segment number. For example, by specifying the field FBSEG01 you obtain the first 64 bytes of the format buffer. The segment number may be a value between 01 and 32, inclusive. The field FBSEGnn is available for summary reports only; use the field FB for detail reports.
IB	32	C	---	The contents of the Adabas ISN buffer if one exists for the Adabas call. When used in a summary report, only the first 32 bytes of this field are displayed. When used in a detail report, the whole ISN buffer is displayed. The IBSEG`nn` field may be used to display parts of the ISN buffer if it is more than 32 bytes long.
IBL	2	B	---	Corresponds to the ACB field ISN buffer length. The use of this field is determined by the command being issued.
IBSEG`nn`	64	C	---	Represents an ISN buffer segment of 64 bytes. The `nn` suffix is the segment number. For example, by specifying the field IBSEG01, you obtain the first 64 bytes of the ISN buffer. The segment number may be a value between 01 and 32, inclusive. The field IBSEGnn is available for summary reports only; use the field IB for detail reports.
RB	32	C	---	The contents of the Adabas record buffer if one exists for the Adabas call. When used in a summary report, only the first 32 bytes of this field are displayed. When used in a detail report, the whole record buffer is displayed. The RBSEG`nn` field may be used to display parts of the record buffer if it is more than 32 bytes long.
RBL	2	B	---	Corresponds to the ACB field record buffer length. The record buffer is used primarily with read, search, and update commands.
RBSEG`nn`	64	C	---	Represents a record buffer segment of 64 bytes. The `nn` suffix is the segment number. For example, by specifying the field RBSEG01, you obtain the first 64 bytes of the record buffer. The segment number may be a number between 01 and 32, inclusive. The field RBSEGnn is available for summary reports only; use the field RB for detail reports.
SB	32	C	---	The contents of the Adabas search buffer if one exists for the Adabas call. When used in a summary report, only the first 32 bytes of this field are displayed. When used in a detail report, the whole search buffer is displayed. The SBSEG`nn` field may be used to display parts of the search buffer if it is more than 32 bytes long.
SBFIELDS	2	C	---	Search buffer fields. Contains the Adabas 2-character field name for each field contained in the Adabas search buffer. This field can only be used in Summary reports.
SBL	2	B	---	Corresponds to the ACB field search buffer length.
SBSEG`nn`	64	C	---	Represents a search buffer segment of 64 bytes. The `nn` suffix is the segment number. For example, by specifying the field SBSEG01, you obtain the first 64 bytes of the search buffer. The segment number may be a number between 01 and 32, inclusive. The field SBSEGnn is available for summary reports only; use the field SB for detail reports.
VB	32	C	---	The contents of the Adabas value buffer if one exists for the Adabas call. When used in a summary report, only the first 32 bytes of this field are displayed. When used in a detail report, the whole value buffer is displayed. The VBSEG`nn` field may be used to display parts of the value buffer if it is more than 32 bytes long.
VBL	2	B	---	Corresponds to the ACB field value buffer length field. The value buffer contains the value used in search commands.
VBSEG`nn`	64	C	---	Represents a value buffer segment of 64 bytes. The `nn` suffix is the segment number. For example, by specifying the field VBSEG01, you obtain the first 64 bytes of the value buffer. The segment number may be a number between 01 and 32, inclusive. The field VBSEG`nn` is available for summary reports only; use the field VB for detail reports.

Interval and Time Fields (IT)

Field System Name	Field Length	Format	Alternate Names	Description
15M	5	C	M15	Establishes 15-minute intervals for the collection of Adabas data.
1M	5	C	MINUTE MIN	Establishes 1-minute intervals for the collection of Adabas data.
5M	5	C	M5	Establishes 5-minute intervals for the collection of Adabas data.
ADADURA	4	B	---	Adabas duration. Corresponds to the DURATION field. This field contains the amount of time (in seconds) that the command spent in the Adabas thread, including the time spent waiting for the completion of I/O operations. The ADADURA field differs from the DURATION field in that the time is computed to 6 decimal places instead of 4 decimal places.
CQDURA	4	B	---	Command queue duration. Contains the amount of time (in seconds) that a command waited in the command queue before being dispatched into an Adabas thread.
DATE	8	C	---	The date (in YYYY-MM-DD format) when the Adabas command was processed.
DAY	1	B	---	The day number (within a month) when the Adabas command was processed.
ENDDATE	4	T	---	The date (in YYYY-MM-DD format) when the last Adabas command was processed for a user or a job.
ENDTIME	4	T	---	The time (in 24-hour format) when the last Adabas command was processed for a user or a job.
FULLSTCK	8	T	---	The 8-byte store clock value taken when the Adabas command was processed.
HOUR	5	C	HR	The hour (in 24-hour format) when the Adabas command was processed.
HR	5	C	HOUR	Alternate name for HOUR.
M15	5	C	15M	Alternate name for 15M.
M5	5	C	5M	Alternate name for 5M.
MIN	5	C	1M MINUTE	Alternate name for 1M.
MINUTE	5	C	1M MIN	Alternate name for 1M.
MO	1	B	MONTH MON	Alternate name for MONTH.
MON	1	B	MON MO	Alternate name for MONTH.
MONAME	3	C	---	The name of the month when the Adabas command was processed.
MONTH	1	B	MON MO	The number of the month when the Adabas command was processed.
QTR	1	B	QUARTER QUAR	Alternate name for QUARTER.
QUAR	1	B	QUARTER QTR	Alternate name for QUARTER.
QUARTER	1	B	QUAR QTR	The quarter of the year in which the Adabas command was processed.
STRTDATE	4	T	---	The date (in YYYY-MM-DD format) when the first Adabas command was processed within the current report control break.
STRTTIME	4	T	---	The time (in 24-hour format) when the first Adabas command was processed within the current report control break.
TIME	8	C	---	The time (in 24-hour format) when the first Adabas call was processed.
TOTDURA	4	B	---	Total duration. Contains the amount of time the command was in the Adabas thread plus the amount of time the command waited in the command queue. The TOTDURA field is the sum of the ADADURA and CQDURA field values expressed in seconds.
WEEK	1	B	WK	The week number of the week in which the Adabas command was processed.
WEEKDAY	3	C	WEEK-DAY	The name of the day on which the Adabas command was processed.
WEEK-DAY	3	C	WEEKDAY	Alternate name for WEEKDAY.
WK	1	B	WEEK	Alternate name for WEEK.
YEAR	1	B	YR	The year (in YYYY format) in which the Adabas command was processed.
YR	1	B	YEAR	Alternate name for YEAR.

Adabas I/O Fields (I/O)

Field System Name	Field Length	Format	Alternate Names	Description
ASSOREAD	4	B	----	Associator read. The total number of Associator read I/Os that occurred during the Adabas session. This value is updated every minute and not when each command is issued.
ASSOWRIT	4	B	---	Associator write. The total number of Associator write I/Os that occurred during the Adabas session. This value is updated every minute and not when each command is issued.
DATAREAD	4	B	---	The total number of Adabas Data Storage read I/Os for the Adabas session. This value is updated every minute and not when each command is issued.
DATAWRIT	4	B	---	The total number of Adabas Data Storage write I/Os for the Adabas session. This value is updated every minute and not when each command is issued.
IO	2	B	IOS	This name is used in the schema portion of the summary record. It is an alternate name for IOS.
IOS	2	B	IO (used in summary record)	The total number of I/Os for the command processed; it is the sum of ASSOIO, DATAIO and WORKIO.
IOCOMP	3	C	---	Identifies the Adabas component against which the I/O was issued. For example, if the I/O is issued against Data Storage extent 1, the field contains DS1. If the I/O is issued against address converter extent 3, the field contains AC3.
IOFUNC	5	C	---	The type of I/O operation performed against an Adabas component. The values for this field are "READ" or "WRITE".
IOLIST	10	C	---	The hexadecimal I/O list for a command obtained from the Adabas command log record. Four bytes are allocated for each I/O list entry.
IOPHYS	16	C	---	A translation of the I/O list entry from the Adabas command log record. The format for this field is `comp-x nnnnnn`, where: `comp` is the Adabas component (ASSO, DATA, or WORK) `x` is the type of I/O, ("R" for read or "W" for write) `nnnnnn` is the RABN (relative Adabas block number)
IORABN	8	C	---	The relative Adabas block number against which the I/O was performed.
IOTOCMD	4	B	---	The ratio of the total number of I/O operations performed to the total number of commands processed.
IOTYPE	4	C	---	Identifies the component against which the I/O operation was performed. Values for this field may be ASSO 'Associator', DATA 'Data Storage', or WORK 'Work data set'.
IOVOLSER	6	C	---	Contains the volume serial number against which the I/O operation was performed. This field may be used to show Adabas I/O distribution.
TOTALIOS	4	B	---	Contains the total number of I/Os performed against all Adabas components for the Adabas session; the sum of ASSOREAD, ASSOWRIT, DATAREAD, DATAWRIT, WORKREAD, and WORKWRIT. This value is updated every minute and not when each command is issued.
WORKREAD	4	B	---	Contains the total number of Work read I/O operations performed during the Adabas session. This value is updated every minute and not when each command is issued.
WORKWRIT	4	B	---	The total number of Work write I/O operations performed during the Adabas session. This value is updated every minute and not when each command is issued.

Natural Fields (NAT)

Field System Name	Field Length	Format	Alternate Names	Description
LEVEL	2	B	NATLEVEL	Alternate name for NATLEVEL.
LIB	8	C	NATLIB	Alternate name for NATLIB.
LOG	8	C	NATAPPL LOGON	This name is used in the schema portion of the summary record. It is an alternate name for NATAPPL.
LOGON	8	C	NATAPPL LOG (used in summary record)	Alternate name for NATAPPL.
NATAPPL	8	C	LOGON LOG (used in summary record)	The Natural application name (or library) to which the user issued a LOGON. This field does not necessarily show the library of the Natural object from which the Adabas call is issued. Under SQL, this field contains the library name.
NATCLTID	8	C	---	NATCLTID displays the client user ID of a user using a Natural server. NATCLTID only contains a value if an RPC client request is executed in a Natural RPC server session. In all other cases the field is empty.
NATCOUNT	2	B	---	The total number of Adabas calls generated by the user application since the last terminal I/O.
NATEXEC	2	B	---	The number of times a Natural object that issues Adabas calls has been executed. NATCOUNT is "1" if the Natural object has issued an Adabas call for the first time on this level; value is zero otherwise.
NATGRP	8	C	---	The current Natural security group to which the user belongs.
NATLEVEL	2	B	LEVEL	The Natural call level of the Natural program issuing the Adabas call. For example, a CALLNAT routine that is called from a program and issues an Adabas call has a Natural level of 2.
NATLIB	8	C	LIB	The name of the Natural library where the object is located that is currently executed.
NATPROG	8	C	PROGRAM PRO (used in summary record)	The name of the Natural program that issued the Adabas call. When Natural internally issues Adabas calls to load Natural objects, this value is not updated. Under SQL, this field contains the program name.
NATRPCID	16	C	---	The 16-byte alphanumeric value for the store clock value used as identification of the Natural RPC Server.
NATRPCCO	16	C	---	The 16-byte alphanumeric value of the conversation ID from the Natural RPC Server.
NATSTMT	4	C	---	The Natural statement number for the Adabas command processed. This field is derived from the Adabas command ID (CID).
NATUID	8	C	---	The name of the Natural library to which the user is currently logged on. This is the value of the Natural system variable *APPLIC-ID.
PRO	8	C	NATPROG PROGRAM	This name is used in the schema portion of the summary record. It is an alternate name for NATPROG.
PROGRAM	8	C	NATPROG PRO (used in summary record)	Alternate name for NATPROG.

Adabas Nucleus Fields (NUC)

Field System Name	Field Length	Format	Alternate Names	Description
ABALLOC	4	B	---	The number of bytes of attached buffer space currently used. An attached buffer is an internal buffer used for interregion communication.
ABDATE	8	C	---	The date (in YYYY-MM-DD format) when the attached buffer high-water mark was reached.
ABENT	4	B	---	The current number of attached buffer entries.
ABPCT	4	B	---	The maximum percentage of attached buffer space used during the Adabas nucleus session.
ABSIZE	4	B	---	The total amount (in bytes) of attached buffer space allocated at Adabas nucleus startup.
ABTIME	8	C	---	The time (in HH:MM:SS format) that the attached buffer high-water mark was reached.
ABUSED	4	B	---	The maximum number (in bytes) of attached buffer space used during the Adabas nucleus session.
BUFFEFF	4	B	---	Buffer efficiency. Contains the ratio of the number of calls to the Adabas buffer pool manager to the number of Adabas physical read requests made to the Associator and the Data Storage devices. For example, if the number of read I/Os is 100 and the number of calls to the buffer pool manager is 500, the buffer efficiency is 500/100 or 5. The higher the buffer efficiency number, the more efficient is the use of buffer space. If the buffer efficiency number is low, it is recommended that you increase the LBP (length of buffer pool) ADARUN parameter.
BUFFLUSH	4	B	---	The number of times that the Adabas buffer pool (LBP) was flushed during the Adabas nucleus session.
BUFFWAIT	4	B	---	The number of times that Adabas Review had to wait for a buffer.
CQALLOC	4	B	---	The number of bytes of command queue space currently used.
CQDATE	8	C	---	The date (in YYYY-MM-DD format) when the command queue high-water mark was reached.
CQENT	4	B	---	The current number of command queue entries.
CQJOB	8	C	---	The job or started task name for the user obtained from the user's command queue element.
CQMAXENT	4	B	---	The maximum number of entries that have been in the command queue for the Adabas nucleus session.
CQPCT	4	B	---	The maximum percentage of command queue space used during the Adabas nucleus session.
CQSIZE	4	B	---	The total number of bytes of command queue space allocated at Adabas nucleus startup.
CQTIME	8	B	---	The time (in HH:MM:SS format) when the command queue high-water mark was reached.
CQUQADDR	8	B	---	The address of the User Queue Element found in the CQE.
CQUSED	4	B	---	The maximum number of bytes of command queue space used during the Adabas nucleus session.
DBNAME	16	C	---	The 16-character name assigned to the database when it was created.
FILENAME	16	C	---	Contains the 16-character name assigned to the Adabas file, and is obtained from the Adabas file control block (FCB). If the file name is not available, the field contains "FCB-UNAVAILABLE".
FILETYPE	6	C	---	Contains the 6-character type assigned to the Adabas file. This field contains the string "USER" if the file is a user file or "SYSTEM" if the Adabas Checkpoint file was read or updated.
FORMATOW	4	B	---	The total number of Adabas internal format overwrites that have occurred during the Adabas nucleus session.
FORMATTR	4	B	---	The total number of Adabas internal format translations that have occurred during the Adabas nucleus session.
HOLDISN	2	B	---	The numbers of ISNs which are in HOLD status by the user at the time this command is executed. The number is obtained after the execution of this command.
HQDATE	8	C	---	The date (in YYYY-MM-DD format) that the hold queue high-water mark was reached.
HQENT	4	B	---	The current number of hold queue entries.
HQPCT	4	B	---	The maximum percentage of hold queue space used during the Adabas nucleus session.
HQSIZE	4	B	---	The total number of bytes allocated to the hold queue at Adabas nucleus startup.
HQTIME	8	C	---	The time (in HH:MM:SS format) that the hold queue high-water mark was reached.
HQUSED	4	B	---	The maximum number of bytes of hold queue space used during the Adabas nucleus session.
HQUSRENT	4	B	---	The number of hold queue user entries.
LFPALLOC	4	B	---	The number of bytes currently used in the format pool.
LFPENT	4	B	---	The current number of entries in the format pool.
LFPMAX	4	B	---	The maximum number of bytes of format pool space used during the Adabas nucleus session.
LFPPCT	4	B	---	The maximum percentage of format pool space used during the Adabas nucleus session.
LFPSIZE	4	B	---	The total number of bytes allocated to the format pool at Adabas nucleus startup.
LFPUSED	4	B	---	The maximum number of bytes of format pool space used during the Adabas nucleus session.
LWPALLOC	4	B	---	The number of bytes of the work pool currently in use.
LWPENT	4	B	---	The current number of work pool entries.
LWPMAX	4	B	---	The maximum number of bytes of work pool space used during the Adabas nucleus session.
LWPMXENT	4	B	---	The maximum number of work pool entries used during the Adabas nucleus session.
LWPPCT	4	B	---	The maximum percentage of work pool space used during the Adabas nucleus session.
LWPSIZE	4	B	---	The number of bytes that were allocated to the work pool at Adabas nucleus startup.
LWPUSED	4	B	---	The maximum number of bytes of work pool space used during the Adabas nucleus session.
NUCID	3	B	SMP (used in summary record)	The ID of an Adabas nucleus in an Adabas Parallel Services or Adabas Cluster Services environment.
SMP	3	B	NUCID	This name is used in the schema portion of the summary record. It is an alternate name for NUCID.
SVC	1	B	---	The Adabas SVC (supervisor call) number used for interregion communication between the user's address space and the Adabas nucleus address space.
SYSCMD	4	B	---	The number of Adabas system commands that have been executed. Adabas system commands execute in Adabas threads 0 and -1.
THDNUM	4	B	---	The number of 8K Adabas threads in the nucleus. The number includes the two Adabas system threads (threads 0 and -1).
THREADSW	4	B	---	The number of thread switches that have occurred during the Adabas nucleus session.
THROWBKS	4	B	---	The number of command throwbacks that have occurred during the Adabas nucleus session. Throwbacks occur when the record you wish to retrieve has been placed on hold by another user. The command you issued is placed on the command queue ("thrown back") for reprocessing.
TIALLOC	4	B	---	The number of bytes of LI (ISN list table) space currently used.
TIDATE	8	C	---	The date (in YYYY-MM-DD format) when the LI (ISN list table) high-water mark was reached.
TIENT	4	B	---	The current number of entries used in the LI (ISN list table).
TIPCT	4	B	---	The maximum percentage of LI (ISN list table) space used during the Adabas nucleus session.
TISIZE	4	B	---	The number of bytes allocated to the LI (ISN list table) at Adabas nucleus startup.
TITIME	8	C	---	The time (in HH:MM:SS format) that the LI (ISN list table) high-water mark was reached.
TIUSED	4	B	---	The maximum number of bytes of LI (ISN list table) space used during the Adabas nucleus session.
TOTALCMD	4	B	---	The total number of Adabas system and user commands that have been processed during the Adabas nucleus session.
TSALLOC	4	B	---	The number of bytes in the LQ (table of sequential commands) currently being used.
TSDATE	8	C	---	The date (in YYYY-MM-DD format) when the LQ (table of sequential commands) high-water mark was reached.
TSENT	4	B	---	The current number of entries in the LQ (table of sequential commands).
TSPCT	4	B	---	The maximum percentage of LQ (table of sequential commands) space used during the Adabas nucleus session.
TSSIZE	4	B	---	The number of bytes allocated to the LQ (table of sequential commands) at Adabas nucleus startup.
TSTIME	8	C	---	The time (in HH:MM:SS format) when the LQ (table of sequential commands) high-water mark was reached.
TSUSED	4	B	---	The maximum number of bytes used in the LQ (table of sequential commands) during the Adabas nucleus session.
UQALLOC	4	B	---	The number of bytes of user queue space currently in use.
UQDATE	8	C	---	The date (in YYYY-MM-DD) format when the user queue high-water mark was reached.
UQENT	4	B	---	The current number of user queue entries.
UQPCT	4	B	---	The maximum percentage of user queue space used during the Adabas nucleus session.
UQSIZE	4	B	---	The number of bytes allocated to the user queue at Adabas nucleus startup.
UQTIME	8	C	---	The time (in HH:MM:SS format) when the user queue high-water mark was reached.
UQUSED	4	B	---	The maximum number of bytes of user queue space ever used.
USERCMD	4	B	---	The total number of Adabas commands issued by users and processed during the Adabas nucleus session.

Operating System Fields (OS)

Field System Name	Field Length	Format	Alternate Names	Description
ACCTINF2	16	C	---	Accounting information about the user that issued the Adabas call for z/OS batch jobs. This field will contain the second value specified in the account field of the job card.
ACCTINFO	16	C	---	Accounting information about the user that issued the Adabas call. For z/OS batch jobs, the field will contain the first value specified in the account field of the job card. For Com-plete users, the field will contain the account information specified in the user's Com-plete profile.
CPUID	8	B	---	The internal identifying serial number of the CPU from which the Adabas call was issued. Note: This field may contain different data when an X'48' call is issued. To avoid such a call in Natural, set Natural parameter ADAMODE=0 (the default value is 2).
JMREDATE	10	C	---	The date (in YYYY-MM-DD format) when the batch job was entered in JES or from the job information macro.
JOB	8	C	JOBNAME	Alternate name for JOBNAME.
JOBCLASS	1	B	---	(z/OS only) The one-byte character of the CLASS parameter in the job card.
JOBID	8	C	---	A combination of the job identifier and the job number of the user who issued the Adabas call. This field is available under z/OS and z/VSE: Under z/OS, the field will contain JOB, STC, or TSU as the job identifier followed by a 5-byte JES job number. Under z/VSE, the field will contain JOB as the identifier, followed by the 5-byte POWER job number.
JOBNAME	8	C	JOB	The name of the job or task from which the Adabas call was issued. This field is the contents of the JOBNAME from the Adabas command log record and may not reflect the actual JOBNAME of the task that issued the Adabas call.
JOBNUM	5	C	---	The job number of the user who issued the Adabas call. This field is available under z/OS and z/VSE. The field will contain an alphanumeric, 5-byte value for the JES (z/OS) or POWER (z/VSE) job number.
LPARNAME	8	C	---	The system LPAR or partition name (in z/OS or z/VSE environments) or the environment name from the job information macro (in BS2000 environments).
LUNAME	8	C	---	The VTAM LU (logical unit) name of the user who issued the Adabas call. If the TP system is Com-plete, the LUNAME field contains the Com-plete ID: The first 3 bytes of the ID represent the Com-pass stack level The fourth byte is the Com-plete patch character The last 4 bytes identify the Com-plete terminal ID number in hexadecimal format. Note: This field may contain different data when an X'48' call is issued. To avoid such a call in Natural, set Natural parameter ADAMODE=0 (the default value is 2).
OPSYSID	4	B	---	The operating system ID. The address of the ASCB (address space control block) for the job or task that issued the Adabas call. Note: This field may contain different data when an X'48' call is issued. To avoid such a call in Natural, set Natural parameter ADAMODE=0 (the default value is 2).
OPSYSNAM	8	C	---	The operating system name (SYSNAME) that is specified in the SYS1.PARMLIB and which will be obtained from the CVT (in z/OS environments) or the operating system name and version number (in BS2000 environments).
ROUTTIME	8	B	---	The amount of time between the time a command was issued by the application and the time it was queued in the Adabas command queue. For Adabas 8.1 and earlier, this field is expressed in seconds; for Adabas 8.2 and later releases, this field is expressed in milliseconds.
STEPNAME	8	C	---	The name of the job step or task step that issued the Adabas call. This step is only available in z/OS environments.

Transaction Processing Monitor Fields (TP)

Field System Name	Field Length	Format	Alternate Names	Description
ACINAME	8	C	CURENPGM	The program name of the Adabas CICS link routine for the DCI interface: ADADCI.
CALLPGM	8	C	---	The program that executed the last EXEC CICS LINK or XCTL command. In non-DCI situations, this is the program calling the Adabas CICS link routine via EXEC CICS LINK In DCI interface situations (used by Natural), this is the name of the executing program if there was no previous EXEC CICS LINK or, if there was a previous EXEC CICS LINK, the name of the program that executed the last EXEC CICS LINK.
CQEUID	28	B	---	Contains the 28-byte Adabas communication user ID for the user who issued the Adabas call. Note: This field may contain different data when an X'48' call is issued. To avoid such a call in Natural, set Natural parameter ADAMODE=0 (the default value is 2).
CURENPGM	8	C	ACINAME	Alternate name for ACINAME.
ETID	8	C	---	The Adabas ET (end transaction) ID that was established during the OP (open) call to Adabas.
SECGID	8	C	---	Contains the security system group ID for the user who issued the Adabas call. This field is available under z/OS when the user is running with an external security system (RACF, ACF2, or Top Secret).
SECUID	8	C	---	Contains the security system user ID for the user who issued the Adabas call. This field is available under z/OS when the user is running with an external security system (RACF, ACF2, or Top Secret).
TID	2	B	---	The Com-plete terminal ID number of the user who issued the Adabas call.
TPTRANCT	4	B	---	A transaction count field. Possible values for this field are either "1" or "0" (zero). A transaction is started with a TP terminal read and completed with a TP terminal write. For the first command of a transaction by a user, this field is set to "1". For all subsequent calls of the same transaction for the same user, this field is set to "0". This field is most useful as a SUM field in conjunction with the field TRANSID. Used in this manner, you can determine the work rate per transaction.
TPTRANNM	4	B	---	The transaction number as established by the user's TP system for the transaction that issued the Adabas call.
TPUSER	8	C	TPUSERID	Alternate name for TPUSERID.
TPUSERID	8	C	TPUSER	The user ID on the TP monitor from which the Adabas call was issued.
TRANSID	8	C	---	The name of the root transaction or program that issued the Adabas call.
TRUENAME	8	C	---	The name of the Adabas CICS link routine TRUE exit.
UBUID	8	C	---	Contains the last 8 bytes of the 28-byte Adabas communication ID (CQEUID) for the user who issued the Adabas call. Note: This field may contain different data when an X'48' call is issued. To avoid such a call in Natural, set Natural parameter ADAMODE=0 (the default value is 2).
UOWID	8	C	---	Contains the instance number and the sequence number of the CICS field NETUOWID, which is 27 bytes long. This field can only be filled in by CICS. The evaluation of this field requires a large amount of CPU time and, therefore, can only be activated by a special ZAP. Following is a description of the bytes in NETUOWID: Offset 0 (Length 1): The length (L) of the Logical-Unit-of-Work-Identifier-Field, not including this field. The NETUOWID contains Logical-Unit-of-Work-Identifier-Field plus padding bytes. Values: 0 or 10 < = L < = 26. Offset 1 (Length 1): The length of Network Name, not including this field, m = L - 9 , 1 < = m < = 17. Offset 2 (Length m): Network name, format: ABCDEFGH.ABCDEFGH, Networkid.Luname. Offset m + 2 (Length 6): Instance number. Offset m + 2 + 6 (Length 2): Sequence number. Offset m + 2 + 6 + 2 (Length until 27): Residual data.
UQUID	4	B	---	Contains the unique 4-byte UQE (user queue element) user ID for the user who issued the Adabas call. This value is allocated in numerically ascending sequence for each UQE allocated by the Adabas nucleus.
USERTYPE	8	C	---	The type of TP system from which the Adabas call was issued. For example, if the Adabas call was issued from a CICS session, the USERTYPE field contains "CICS".

User Fields (UF)

Field System Name	Field Length	Format	Alternate Names	Description
USERFLD1 through USERFLD5	user-defined	user-defined	---	These are user fields, made available to you so you can report on data you choose. For complete information about defining and using Adabas Review user fields, read Defining Adabas Review User Fields.

SEARCH INDEX CONTENTS | PDF PAGE PDF BOOKS | HOME UP PREV NEXT