REV20001 | REV20002 | REV20003 | REV20004 | REV20005 | REV20011 | REV20012 | REV20013 | REV20014 | REV20015 | REV20016 | REV20017 | REV20018 | REV20019 | REV20020 | REV20021 | REV20022 | REV20023 | REV20024 | REV20025 | REV20026 | REV20027 | REV20028 | REV20029 | REV20030 | REV20031 | REV20032 | REV20033 | REV20034 | REV20035 | REV20036 | REV20037 | REV20038 | REV20039 | REV20040 | REV20041 | REV20042 | REV20043 | REV20044 | REV20045 | REV20046 | REV20047 | REV20048 | REV20049 | REV20050 | REV20051 | REV20052 | REV20053 | REV20054 | REV20055 | REV20056 | REV20061 | REV20062 | REV20063 | REV20101 | REV20102 | REV20103 | REV20104 | REV20105 | REV20106 | REV20107 | REV20110 | REV20119 | REV20120 | REV20121 | REV20122 | REV20123 | REV20124 | REV20125 | REV20126 | REV20127 | REV20128 | REV20129 | REV20130 | REV20141 | REV20142 | REV20146 | REV20147 | REV20148 | REV20149 | REV20150 | REV20151 | REV20152 | REV20153 | REV20154 | REV20155 | REV20156 | REV20157 | REV20158 | REV20159 | REV20160 | REV20161 | REV20162 | REV20163 | REV20164 | REV20165 | REV20166 | REV20185 | REV20186 | REV20187 | REV20190 | REV20191 | REV20192 | REV20199 | REV20232 | REV20233 | REV20241 | REV20254 | REV20255| REV20001 | ERROR IN PARAMETERS AS FOLLOWS | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Explanation |
An error was detected during the parameter processing phase of Adabas Review. All parameters are processed for further error diagnosis. However, no data is handled by the Adabas Review processor. This message is followed by one of the PRMnnn error messages shown below.
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Action |
Correct the error and resubmit the job. |
| REV20002 | INVALID FILE-TYPE |
| Explanation |
An invalid INPUT statement file-type parameter has been detected. Processing is discontinued. |
| Action |
Correct the error and resubmit the job. |
| REV20003 | INVALID FILE-TYPE |
| Explanation |
An invalid INPUT statement file-type parameter has been detected. Processing is discontinued. |
| Action |
Correct the error and resubmit the job. |
| REV20004 | PRIOR REPORT STATEMENT MISSING |
| Explanation |
A valid REPORT statement must precede all other parameter statements except the INPUT statement. Processing is discontinued. |
| Action |
Define a valid REPORT statement and resubmit the job. |
| REV20005 | INVALID PRINTER LINE SIZE |
| Explanation |
The printer line size must be at least 72 positions and cannot exceed 4080 positions. Processing is continued. |
| Action |
Define a valid LINE SIZE statement and resubmit the job. |
| REV20011 | INVALID FIELD NAME IN MINIMUM STATEMENT |
| Explanation |
The name must match one of the field names or alias names defined for the Adabas command log record. |
| Action |
The invalid field name is ignored. Processing is continued for the valid field names specified as positional parameters in this statement. |
| REV20012 | INVALID FIELD NAME IN MAXIMUM STATEMENT |
| Explanation |
The name must match one of the field names or alias names defined for the Adabas command log record. |
| Action |
The invalid field name is ignored. Processing is continued for the valid field names specified as positional parameters in this statement. |
| REV20013 | INVALID FIELD NAME IN AVERAGE STATEMENT |
| Explanation |
The name must match one of the field names or alias names defined for the Adabas command log record. |
| Action |
The invalid field name is ignored. Processing is continued for the valid field names specified as positional parameters in this statement. |
| REV20014 | INVALID FIELD NAME IN PERCENT STATEMENT |
| Explanation |
The name must match one of the field names or alias names defined for the Adabas command log record. |
| Action |
The invalid field name is ignored. Processing is continued for the valid field names specified as positional parameters in this statement. |
| REV20015 | INVALID FIELD NAME IN COST STATEMENT |
| Explanation |
The name must match one of the field names or alias names defined for the Adabas command log record. |
| Action |
The invalid field name is ignored. Processing is continued for the valid field names specified as positional parameters in this statement. |
| REV20016 | INVALID FIELD USAGE FOR MINIMUM STATEMENT |
| Explanation |
The field name specified is not a numeric field. |
| Action |
The invalid field name is ignored. Processing is continued for the valid field names specified as positional parameters in this statement. |
| REV20017 | INVALID FIELD USAGE FOR MAXIMUM STATEMENT |
| Explanation |
The field name specified is not a numeric field. |
| Action |
The invalid field name is ignored. Processing is continued for the valid field names specified as positional parameters in this statement. |
| REV20018 | INVALID FIELD USAGE FOR SUM STATEMENT |
| Explanation |
The field name specified is not a numeric field. |
| Action |
The invalid field name is ignored. Processing is continued for the valid field names specified as positional parameters in this statement. |
| REV20019 | INVALID FIELD USAGE FOR AVERAGE STATEMENT |
| Explanation |
The field name specified is not a numeric field. |
| Action |
The invalid field name is ignored. Processing is continued for the valid field names specified as positional parameters in this statement. |
| REV20020 | INVALID FIELD USAGE FOR COST STATEMENT |
| Explanation |
The field name specified is not a numeric field. |
| Action |
The invalid field name is ignored. Processing is continued for the valid field names specified as positional parameters in this statement. |
| REV20021 | INVALID FIELD USAGE FOR PERCENT STATEMENT |
| Explanation |
The field name specified is not a numeric field. |
| Action |
The invalid field name is ignored. Processing is continued for the valid field names specified as positional parameters in this statement. |
| REV20022 | ACCOUNT STATEMENT INVALID FOR A DETAIL REPORT |
| Explanation |
The statement specified can only be used for summary reports. |
| Action |
The statement is ignored and processing continues. Specify this statement following a valid REPORT statement with TYPE=SUMMARY. |
| REV20023 | SUM STATEMENT INVALID FOR A DETAIL REPORT |
| Explanation |
The statement specified can only be used for summary reports. |
| Action |
The statement is ignored and processing continues. Specify this statement following a valid REPORT statement with TYPE=SUMMARY. |
| REV20024 | MINIMUM STATEMENT INVALID FOR A DETAIL REPORT |
| Explanation |
The statement specified can only be used for summary reports. |
| Action |
The statement is ignored and processing continues. Specify this statement following a valid REPORT statement with TYPE=SUMMARY. |
| REV20025 | MAXIMUM STATEMENT INVALID FOR A DETAIL REPORT |
| Explanation |
The statement specified can only be used for summary reports. The statement is ignored and processing continues. |
| Action |
Specify this statement following a valid REPORT statement with TYPE=SUMMARY. |
| REV20026 | AVERAGE STATEMENT INVALID FOR A DETAIL REPORT |
| Explanation |
The statement specified can only be used for summary reports. The statement is ignored and processing continues. |
| Action |
Specify this statement following a valid REPORT statement with TYPE=SUMMARY. |
| REV20027 | PERCENT STATEMENT INVALID FOR A DETAIL REPORT |
| Explanation |
The statement specified can only be used for summary reports. The statement is ignored and processing continues. |
| Action |
Specify this statement following a valid REPORT statement with TYPE=SUMMARY. |
| REV20028 | APPLYMOD nn HAS BEEN TURNED {ON | OFF} BY user-id |
| Explanation |
The applymod nn has been turned ON/OFF by the user user-id. |
| Action |
This message is for information only. |
| REV20029 | INVALID COST VALUE |
| Explanation |
COST may be specified as field/operator/value, where valid operators are * (TIMES), + (PLUS), and - (MINUS). Fixed costs may be specified using the reserved word FIXED with an operator of @ (AT). Positive and negative values are allowed with or without a single imbedded decimal point. |
| Action |
A value of 0 is assumed. Correct the value and resubmit the job. |
| REV20030 | INVALID COPY FILE-TYPE |
| Explanation |
An invalid COPY statement file-type parameter was detected. |
| Action |
The COPY statement is ignored and processing is continued. Correct the statement and resubmit the job if necessary. |
| REV20031 | TERMINATION TASK ATTACHED SUCCESSFULLY |
| Explanation |
Termination task attached successfully. |
| Action |
This message is for information only. |
| REV20032 | TERMINATION TASK NOT FOUND IN THE PROGRAM LIBRARY |
| Explanation |
Termination task not found in the program library. |
| Action |
Contact your Software AG technical support representative. |
| REV20033 | I/O ERROR OCCURRED WHILE LOADING TERMINATION TASK |
| Explanation |
I/O error occurred while loading termination task. |
| Action |
Contact your Software AG technical support representative. |
| REV20034 | SEVERE PARAMETER ERROR(S) |
| Explanation |
A parameter error of some significance was reported. All parameters are processed for further error diagnosis. However, the run is discontinued before any input data is processed. |
| Action |
Correct the error and resubmit the job. |
| REV20035 | SEVERE PARAMETER ERROR(S) |
| Explanation |
A parameter error of some great significance has occurred. Parameter validation is terminated. |
| Action |
Correct the error and resubmit the job. |
| REV20036 | REPORT DISCONTINUED DUE TO LIMIT PARAMETER |
| Explanation |
The report has been discontinued due to the LIMIT parameter. The LIMIT parameter on the report statement has been exceeded. |
| Action |
This message is for information only. |
| REV20037 | SUMMARY REPORT EXCEEDS LINE SIZE |
| Explanation |
The number of printable characters for the report exceed the report line size. |
| Action |
Increase the report line size if possible or reduce the report data to be displayed. |
| REV20038 | TERMINATION TASK INITIATED |
| Explanation |
Termination task initiated. |
| Action |
This message is for information only. |
| REV20039 | OPEN OPERATION FAILURE ON PRINTER |
| Explanation |
An error occurred attempting to open the above file. When this occurs, processing is discontinued. |
| Action |
Correct the error and resubmit the job. |
| REV20040 | OPEN OPERATION FAILURE ON COPY |
| Explanation |
An error occurred attempting to open the copy file. When this occurs, processing is discontinued. |
| Action |
Correct the error and resubmit the job. |
| REV20041 | OPEN OPERATION FAILURE ON LOG INPUT |
| Explanation |
An error occurred attempting to open the log input file. When this occurs, processing is discontinued. |
| Action |
Correct the error and resubmit the job. |
| REV20042 | OUTPUT ERROR ON PRINTER |
| Explanation |
An error occurred attempting to output to the printer file. When this occurs, processing is discontinued. |
| Action |
Correct the error and resubmit the job. |
| REV20043 | OUTPUT ERROR ON COPY |
| Explanation |
An error occurred attempting to output to the copy file. When this occurs, processing is discontinued. |
| Action |
Correct the error and resubmit the job. |
| REV20044 | CLOSE OPERATION FAILURE ON file-name |
| Explanation |
An error occurred while Adabas Review attempted to close the specified file. |
| Action |
This message is for information only. |
| REV20045 | ADABAS RESPONSE CODE |
| Explanation |
A potentially severe Adabas error has occurred. The Adabas interaction was a result of the COPY statement with FILETYPE=ADABAS. |
| Action |
Processing is discontinued. Evaluate the significance of the Adabas error and perform the required action. |
| REV20046 | INTERVAL STATISTICS TASK TERMINATING |
| Explanation |
Adabas Review detected that an EOJ command was issued to the Com-plete nucleus. Adabas Review terminates the interval task and starts the termination task. |
| Action |
This message is for information only. |
| REV20047 | INTERVAL STATISTICS TASK STARTED |
| Explanation |
The Adabas Review Interval Statistics task has been started. |
| Action |
This message is for information only. |
| REV20048 | NO INTERVAL STATISTICS RECORD FOUND |
| Explanation |
Adabas Review unsuccessfully attempted to load the interval statistics record from its system file. |
| Action |
Contact your Adabas Review administrator. |
| REV20049 | xxxxxxxxxxxx WILL BE SAVED EVERY nnn MINS |
| Explanation |
The Adabas Review interval statistics task will save the data from the function or subsystem xxxxxxxxxxxx every nnn minutes. |
| Action |
This message is for information only. |
| REV20050 | nnnnnnnn TASK ATTACHED SUCCESSFULLY |
| Explanation |
The Adabas Review task nnnnnnnn was attached successfully. |
| Action |
This message is for information only. |
| REV20051 | NO DUMMY TID AVAILABLE FOR USE BY nnnnnnnn TASK |
| Explanation |
Adabas Review was unable to attach the nnnnnnnn task because no dummy TID was available for use by the attached program. |
| Action |
If this problem happens frequently, the system programmer responsible for Com-plete maintenance should be requested to increase the value of the NOTIBS keyword argument in the TIBTAB definition. |
| REV20052 | nnnnnnnn TASK NOT FOUND IN THE PROGRAM LIBRARY |
| Explanation |
Adabas Review was unable to attach the nnnnnnnn task because the program to be attached was not found in the Com-plete program library data set. |
| Action |
Request that the system programmer responsible for Com-plete catalog the program. |
| REV20053 | I/O ERROR OCCURRED WHILE LOADING INTERVAL TASK |
| Explanation |
Adabas Review was unable to attach the interval task because an unrecoverable I/O error occurred while reading the Com-plete program library. |
| Action |
Contact your Software AG technical support representative. |
| REV20054 | THE NAME OF THE PROGRAM TO BE ATTACHED IS NOT VALID |
| Explanation |
The Adabas Review master interval statistics task was unable to attach the interval task because the name of the program to be attached is not valid. |
| Action |
Contact your Software AG technical support representative. |
| REV20055 | UNKNOWN RETURN CODE FROM ATTACH |
| Explanation |
The Adabas Review master interval statistics task was unable to attach the interval task because it received an unknown return code. |
| Action |
Contact your Software AG technical support representative. |
| REV20056 | xxxxxxxxxxxxxxx TASK INCORRECTLY LINKED |
| Explanation |
The Adabas Review task has detected that
|
| Action |
Rerun the link job provided in the Adabas Review source library, ensuring that the JCL is correct. |
| REV20061 | MASTER INTERVAL TASK ALREADY ACTIVE |
| Explanation |
An attempt was made to start the master interval statistics task but the task was already active. |
| Action |
Do not attempt to start the master interval task. |
| REV20062 | TERMINATION TASK TERMINATED |
| Explanation |
The termination task has ended. |
| Action |
This message is for information only. |
| REV20063 | error-type ERROR error-number OCCURRED ON LINE line-number OF PROGRAM program-name | ||
| Explanation |
An error has occurred while executing the specified program:
|
||
| Action |
Record message and contact your Software AG technical support representative. |
| REV20101 | HISTORY FILE POPULATION STARTED |
| Explanation |
The Adabas Review history file task has been started. |
| Action |
This message is for information only. |
| REV20102 | HISTORY FILE POPULATION COMPLETED |
| Explanation |
The Adabas Review history file task has completed execution. |
| Action |
This message is for information only. |
| REV20103 | ADABAS RSP = rsp RECEIVED |
| Explanation |
The Adabas Review history file task received a non-zero Adabas response code. |
| Action |
Evaluate the severity of the response code and perform the required steps to resolve the problem. |
| REV20104 | HISTORY TASK POSTED FOR WORK |
| Explanation |
The Adabas Review history file task has posted for work. This means that a detailed report with a COPY statement with FILETYPE=ADABAS is active and has selected data to write out to the Adabas Review history file. |
| Action |
This message is for information only. |
| REV20105 | HISTORY TASK WAITING FOR WORK |
| Explanation |
The Adabas Review history file task is waiting for work. |
| Action |
This message is for information only. |
| REV20106 | HISTORY TASK ERROR DURING FREEMAIN |
| Explanation |
The Adabas Review history file task received a nonzero return code attempting to free storage. |
| Action |
Contact your Software AG technical support representative. |
| REV20107 | HISTORY TASK UNABLE TO OPEN RVUALT |
| Explanation |
An error has occurred while attempting to open the RVUALT file. |
| Action |
Verify that the JCL is correct and that the RVUALT file is available. |
| REV20110 | Corrupted length arrived from Natural. Length truncated to 65535. |
| Explanation |
A corrupted length value arrived in the format buffer of a search buffer from Natural. The corrupted length value is truncated to 65535. |
| Action |
Contact your Software AG technical support representative for assistance in resolving the problem. |
| REV20119 | Catastrophic error, no registers available, check dump. |
| Explanation |
An abend occurred, the REVIEW Estae got control, but the data were corrupted so completely that the ESTAE cannot continue its work. |
| Action |
This message is for your information only. Check the dump to find the error. Contact your Software AG technical support representative. |
| REV20120 | REVIEW v.r.s RUNNING WITH ADABAS n.n |
| Explanation |
Adabas Review has been given control for the first time where v.r.s is the Adabas Review version and n.n is the Adabas version. |
| Action |
This message is for information only. |
| REV20121 | ATTACH FOR REVIEW SUBTASK FAILED |
| Explanation |
Adabas Review attempted to attach an operating system subtask but received a nonzero return code from this action. |
| Action |
Examine the messages displayed by the operating system and correct the problem. The possibility exists that the address space, region, or partition was not large enough to attach the task, or the attached module RAOSREVW was not in the library concatenations so it could not be found to be loaded. |
| REV20122 | REV20122 - ADABAS REVIEW ESTAE exit driven.
REV20122 - ADABAS REVIEW now disabled. REV20122 - ABEND 000xx000 PSW xxxxxxxx xxxxxxxx REV20122 - R0 xxxxxxxx - R1 xxxxxxxx - R2 xxxxxxxx - R3 xxxxxxxx REV20122 - R4 xxxxxxxx - R5 xxxxxxxx - R6 xxxxxxxx - R7 xxxxxxxx REV20122 - R4 xxxxxxxx - R9 xxxxxxxx - R10 xxxxxxxx - R11 xxxxxxxx REV20122 - R12 xxxxxxxx - R13 xxxxxxxx - R14 xxxxxxxx - R15 xxxxxxxx REV20122 - Dump has been taken. |
| Explanation |
The main task of Adabas Review in local mode had an abend. The REVIEW ESTAE got control and issued these messages and was forced to write a dump. The Adabas nucleus will continue working, but Review will be disabled. |
| Action |
This message is for your information only. Check the dump to find the error. Contact your Software AG technical support representative. |
| REV20123 | ESTAE driven recursively. |
| Explanation |
The REVIEW ESTAE is called a second time, although REVIEW should run disabled. |
| Action |
This message is for your information only. Check the dump to find the error. Contact your Software AG technical support representative. |
| REV20124 | ALLOCATION FOR REVIEW BUFFER POOL FAILED |
| Explanation |
Adabas Review unsuccessfully acquired storage for the Adabas Review buffer. The size of the buffer is determined by the BUFFER-SEGMENTS parameter on the Adabas Review INPUT statement. |
| Action |
Increase the size of the address space, region, partition, or virtual machine that Adabas Review is executing or decrease the size of the Adabas Review buffer. |
| REV20125 | REVIEW SUBTASK SUCCESSFULLY ATTACHED |
| Explanation |
Adabas Review successfully attached an operating system subtask. |
| Action |
This message is for information only. |
| REV20126 | REVIEW SUBTASK DETACHED |
| Explanation |
Adabas Review successfully detached an operating system subtask during its termination logic. |
| Action |
This message is for information only. |
| REV20127 | REV20127 - ADABAS REVIEW forced abnormal termination. REV20127 - R0 - nnnnnnnn R1 - nnnnnnnn R2 - nnnnnnnn R3 - nnnnnnnn REV20127 - R4 - nnnnnnnn R5 - nnnnnnnn R6 - nnnnnnnn R7 - nnnnnnnn REV20127 - R8 - nnnnnnnn R9 - nnnnnnnn RA - nnnnnnnn RB - nnnnnnnn REV20127 - RC - nnnnnnnn RD - nnnnnnnn RE - nnnnnnnn RF - nnnnnnnn |
| Explanation |
The Review subtask REVIEWB or the Review batch module REVIEWB found an internal serious error. REVIEWB is disabled. |
| Action |
This message is for your information only. Check the dump to find the error. Contact your Software AG technical support representative. |
| REV20128 | ATTACH FOR HISTORY SUBTASK FAILED |
| Explanation |
Adabas Review attempted to attach an operating system subtask but received a nonzero return code from this action. |
| Action |
Examine the messages also displayed by the operating system and correct the problem. The possibility exists that the address space, region, or partition was not large enough to attach the task, or the attached module was not in the library concatenations so it could not be found to be loaded. |
| REV20129 | HISTORY SUBTASK DETACHED |
| Explanation |
Adabas Review successfully detached an operating system subtask during its termination logic. |
| Action |
This message is for information only. |
| REV20130 | HISTORY SUBTASK SUCCESSFULLY ATTACHED |
| Explanation |
Adabas Review successfully attached an operating system subtask. |
| Action |
This message is for information only. |
| REV20141 | GETMAIN FOR SPARE AREA FAILED |
| Explanation |
This message indicates a specific phase of Adabas Review execution. |
| Action |
This message is for information only. |
| REV20142 | RCSBINIT - REVIEW INITIALIZATION STARTED |
| Explanation |
This message indicates a specific phase of Adabas Review execution. |
| Action |
This message is for information only. |
| REV20146 | RCSBSUM - SUMMARY PROCESSING |
| Explanation |
This message indicates a specific phase of Adabas Review execution. |
| Action |
This message is for information only. |
| REV20147 | RCSBFINI - CALLED FOR TERMINATION |
| Explanation |
This message indicates a specific phase of Adabas Review execution. |
| Action |
This message is for information only. |
| REV20148 | RCSBREIN - REINITIALIZATION |
| Explanation |
This message indicates a specific phase of Adabas Review execution. |
| Action |
This message is for information only. |
| REV20149 | REVIEW IS OPERATIVE |
| Explanation |
This message indicates a specific phase of Adabas Review execution. |
| Action |
This message is for information only. |
| REV20150 | FILE RVUALT CAN NOT BE OPENED |
| Explanation |
This is an internal error that rarely occurs. |
| Action |
Contact your Software AG technical support representative. |
| REV20151 | NOW SWITCHING LOGS FROM clog-dataset1 TO clog-dataset2 |
| Explanation |
A LOG switch is in progress. The FROM data set can now be copied. The TO data set will receive command log output. |
| Action |
This message is for information only. |
| REV20152 | NOW IT'S TOO LATE TO COPY clog-dataset |
| Explanation |
The specified command log data set is open for output. The command log can no longer be copied. |
| Action |
This message is for information only. |
| REV20153 | RAOSAUTO SUBTASK DETACHED |
| Explanation |
The RAOSAUTO subtask has been detached successfully. |
| Action |
This message is for information only. |
| REV20154 | AUTO REGENERATE STARTED |
| Explanation |
The RAOSAUTO automatic regeneration subtask started successfully. |
| Action |
This message is for information only. |
| REV20155 | AUTO REGENERATE COMPLETED |
| Explanation |
The RAOSAUTO automatic regeneration subtask has completed successfully. |
| Action |
This message is for information only. |
| REV20156 | RESPONSE CODE rsp FOR cmd COMMAND TO DBID= dbid ,FNR= fnr |
| Explanation |
The RAOSAUTO automatic regeneration subtask issued an Adabas call and received the response indicated in the message. |
| Action |
Verify that the LFILE/NTFILE statement for Adabas Review points to the correct DBID and FNR for the Adabas Review data file. |
| REV20157 | GETMAIN FAILED |
| Explanation |
A request for a GETMAIN failed in RAOSSYDR. |
| Action |
Increase the region size for the Adabas task. |
| REV20158 | DOING OPEN CALL BECAUSE OF RESP 9 |
| Explanation |
The Adabas Review history task had to perform an OP (open) call during history data population because an Adabas response code 9 was encountered. |
| Action |
This message is for information only. |
| REV20159 | FREEMAIN FAILED |
| Explanation |
A request for a FREEMAIN to RAOSSYDR failed. |
| Action |
Contact your Software AG technical support representative. |
| REV20160 | HISTORY FILE POPULATION FAILED |
| Explanation |
An error was encountered during Adabas Review history file population and the history subtask was unable to continue. |
| Action |
Check additional warning messages issued by subtask. |
| REV20161 | nnnnn ET COMMANDS WERE ISSUED |
| Explanation |
The number of ET commands issued by the Adabas Review history task was nnnnn. The ET commands were issued to synchronize history file population. |
| Action |
This message is for information only. |
| REV20162 | LOAD FAILED FOR module-name |
| Explanation |
A request for a LOAD to RAOSSYDR failed. The requested module was not found in the STEPLIB. |
| Action |
Check the STEPLIB to be sure that the module is present. |
| REV20163 | IMMEDIATE RECOVERY FOR RVUALT REQUIRED |
| Explanation |
The Adabas Review history task encountered an error during history file population and could not continue processing. |
| Action |
Copy the RVUALT data file to another sequential data file and reinitialize Adabas Review. |
| REV20164 | OPEN FAILED FOR xxxxxxxx |
| Explanation |
A request for an OPEN for DD or file name xxxxxxxx to RAOSSYDR failed. |
| Action |
Check that the required DD card or filedef is present in the task job stream. |
| REV20165 | THE VALUE OF FIELD field IS value IT IS TOO BIG, trunc-value STORED INSTEAD. |
| Explanation |
When storing data into the history file it was detected that the value (value) of the field listed in the message (field) is bigger than the maximum field length allowed in the history file. Storing such a data can result in later Adabas response code 55. The value is therefore truncated (trunc-value) and stored instead. |
| Action |
Contact your Software AG support representative about this message to avoid this in the future. |
| REV20166 | RECORD TO xxxxxxxx skipped, because > 32K |
| Explanation |
While writing a CLOG record, Adabas Review determined that the record was larger than 32767 bytes. Records larger than 32767 bytes are not written to the data set. The DD name or link name of the data set is given in the message (xxxxxxxx). This message is issued only one time. |
| Action |
Contact your Software AG technical support representative. |
| REV20185 | UNABLE TO LOAD USER EXIT module-name - RC xx (xx) |
| Explanation |
The Adabas Review command log processor was unable to load the specified user exit module to copy Adabas Review command logs. |
| Action |
Ensure that the module exists in one of the libraries accessible by Adabas Review. |
| REV20186 | ADAIOR function REQUEST FAILED |
| Explanation |
Internal error occurred. |
| Action |
Contact your Software AG technical support representative. |
| REV20187 | FUNCTION function NO LONGER SUPPORTED BY INTERFACE |
| Explanation |
Internal error occurred. |
| Action |
Contact your Software AG technical support representative. |
| REV20190 | USER PARM ERROR - text |
| Explanation |
A syntax error was recognized when file RVUFLD was read (custom reporting fields). Possible texts include the following: CANNOT LOCATE USERFLD
INVALID NAME PARAMETER
INVALID INTYPE PARAMETER
INVALID OUTTYPE PARAMETER
INVALID HEADER PARAMETER
INVALID ADANAME PARAMETER
INVALID CALC PARAMETER
PREVIOUS PARM LEN TOO LONG
PREVIOUS PARM NOT NUMERIC
DELIMITER <=>NOT FOUND
KEYWORD MISSING OR NOT RECOGNIZED |
| Action |
Correct the syntax error and restart Adabas Review. |
| REV20191 | ADABAS vrs not supported |
| Explanation |
The current Adabas Review version does not run with the Adabas version. |
| Action |
Check which Adabas Review version runs with your Adabas version. |
| REV20192 | Only CLOGLAYOUT=5 or 8 supported |
| Explanation |
Adabas Review received erroneous CLOG records with CLOGLAYOUT not set to "5" or "8". Only CLOGLAYOUT=5 or 8 is supported. |
| Action |
Verify that the setting of the Adabas nucleus ADARUN CLOGLAYOUT parameter is 5 or 8. |
| REV20199 | Old CLEX arrived |
| Explanation |
Adabas Review received a call from an Adabas version 8.1 (or earlier) database. The internal structure of the CLEX is converted to the new format of the CLEX. |
| Action |
No action is required for this informational message. |
| REV20232 | REPORT report-name status-message |
| Explanation |
One of the following status messages applied to the specified report: DEACTIVATED DUE TO MAXSTORE LIMIT EXCEEDED The specified active report stopped collecting data because all storage space allocated by the MAXSTORE parameter has been used. DEACTIVATED DUE TO STORAGE ALLOCATION FAILURE
The specified active report stopped collecting data because no more storage is available in the address space/partition. ENCOUNTERED STORAGE ALLOCATION FAILURE, REINITIALIZATION SCHEDULED The specified active report stopped collecting data because no more storage is available in the address space/partition. All reports will be reinitialized. DEACTIVATED DUE TO HASH TABLE MANAGER INITIALIZATION ERROR The specified active report could not collect data because of an error in the hash table manager. DEACTIVATED DUE TO HASH TABLE MANAGER FIND ERROR The specified active report could not collect data because of an error in the hash table manager. DEACTIVATED DUE TO TERMINATION PROCESSING STORAGE ALLOCATION FAILURE The specified active report could not perform termination processing because no more storage is available in the address space/partition. HISTORICAL DATA COLLECTION DEACTIVATED DUE TO STORAGE ALLOCATION FAILURE The specified report could not perform historical data collection because no more storage is available in the address space/partition. |
| Action |
Investigate the cause of the specific error. In the event of a failure in the hash table manager, contact your Software AG technical support representative. |
| REV20233 | PARAMETER ERROR(S) ENCOUNTERED PROCESSING RVUEXI PARAMETER FILE |
| Explanation |
Parameter error(s) were encountered when Adabas Review was processing the RVUEXI parameter file specified in the Adabas startup procedure. |
| Action |
Refer to the RVUEXP output file to determine the parameters that were in error and correct the specified parameters. |
| REV20241 | A BUFFER WILL NOT FIT INTO LORECR |
| Explanation |
During conversion of log records to the Adabas Review internal command log record (LORECR) format, a buffer would not fit into LORECR due to LORECR size limitations. The information of this buffer is cut and you may not be able to find the desired buffer information in the report output. |
| Action |
If the data in the affected buffer is not used in a report definition, this error can be ignored as it causes no consequences. However, if this error causes data to be missing, contact your Software AG technical support representative for assistance. |
| REV20254 | ADATMZ COULD NOT BE LOADED |
| Explanation |
The module ADATMZ could not be found in the load library specified in the Adabas or Review hub startup procedure. The SYSREVDB function AA will not run without this module. |
| Action |
Specify either an Adabas version 8.1.4 (or later) load library or an Adabas 8.1.4 (or later) limited load library (WAL) in the startup procedure. |
| REV20255 | parameter SET TOO LOW OR MISSING | ||||||||||||
| Explanation |
The parameter of the INPUT statement named in the message (parameter) is set too low or is not coded. Possible parameters that may appears in this message are the BUFFER-SEGMENTS parameter, the BUFFERS-4K parameter, or the BUFFERS-32K parameter. The following table describes these parameters further:
Adabas Review runs with the minimum value setting of these parameters. However, if this setting is too small for a hub environment running Trans-port, command log records might be lost. |
||||||||||||
| Action |
Increase the value setting of the buffer parameters, as described above. |
