This document describes the procedures for setting up and using Adabas Review after the installation has been completed.
If this is the first time you have installed Adabas Review, or you have loaded a new Adabas Review repository file, you must initialize:
the user profile system for controlling user access to Adabas Review; and
the Adabas Review data file, which designates a DBID and SVC for the Adabas Review repository, and installs the supplied Adabas Review reports.
To initialize the Adabas Review user profile system:
Access Natural as you normally do.
At the NEXT prompt, log on to the library SYSREVDB.
Note:
Wherever the NEXT prompt is specified, the command can also be
issued from the Natural main menu command line.
At the NEXT prompt, enter INSTALL UP and press ENTER.
This initializes the Review user profile system and adds one default user record to the system. You must have this initial user defined in order to enter Adabas Review.
The following message appears when the user profile subsystem has been successfully installed:
Default user profile installed
Note:
The Adabas Review default user profile is delivered with the HUB
/ LOCL database ID set to zero. When running Adabas Review in local mode, the
zero setting causes the initial database ID to be set to the same value as the
Natural LFILE parameter value. However, when starting Adabas Review in hub
mode, you need to modify the default user profile and reset the zero to the
ADARUN REVIEW=hubid value. You can also manually override the default user
profile database ID value by issuing HUB=hubid from the command line after you
log on to Adabas Review.
At the NEXT prompt, enter MENU and press ENTER to display the main menu:
20:35:09 A D A B A S - R E V I E W 2009-04-30
Main Menu HUB=15690
Code Description
---- ---------------------------------
AA Available Adabas Nuclei
AO Adabas Online System
EB Edit Buffer Pool Report
EL Edit Pulse Report
ER Edit Report Definition
ET Edit Target Definition
EX Edit Cluster Services Report
LH List History Reports
LR List Report Definitions
LS List Started Reports
LT List Target Definitions
UP User Profiles
---- ---------------------------------
Command: ______________________________________________________________________
Enter-PF1---PF2---PF3---PF4---PF5---PF6---PF7---PF8---PF9---PF10--PF11--PF12---
Help Fin Fin
|
Note:
If you are using a repository from a previous version, omit this
step.
To initialize the Review data file:
At the main menu command line, enter INSTALL DB and press ENTER to display the Initialization Process window:
09:34:30 ***** R E V I E W ***** YYYY-MM-DD
Main Menu LOCL=00222
+------------------------------------------------+
| Initialization Process |
| |
| You are about to save information into the |
| REVIEW repository. |
| |
| The DBID/FNR of the REVIEW repository is |
| currently set to: DBID: 221 |
| FNR: 12 |
| |
| If this is correct enter 'YES' to continue, |
| else press enter to cancel: ___ |
| |
+------------------------------------------------+
REV00001 - WELCOME TO REVIEW RUNNING UNDER COMPLETE
Command: install db___________________________________________________________
Enter-PF1---PF2---PF3---PF4---PF5---PF6---PF7---PF8---PF9--PF10--PF11--PF12---
Help Exit Fin
|
Confirm or cancel the initialization.
You are prompted to confirm the DBID and FNR of the Adabas Review repository. If the DBID or FNR are not correct, you may cancel the initialization.
To confirm the initialization, enter YES at the prompt.
To cancel the initialization, press ENTER.
If the initialization is confirmed, the Default Target Definition screen appears:
14:36:22 ***** R E V I E W ***** YYYY-MM-DD
Main Menu HUB=12345
+------------------------------------------------+
+------------------------------------------------+
| Default Target Definition |
| |
| Please enter the appropriate SVC and Version |
| for Adabas DBID 221: |
| |
| Adabas SVC ...... ___ |
| Adabas Version .. ___ |
| |
| |
+------------------------------------------------+
| |
+------------------------------------------------+
Command: install db____________________________________________________________
Enter-PF1---PF2---PF3---PF4---PF5---PF6---PF7---PF8---PF9---PF10--PF11--PF12---
Help Exit Fin
|
You are prompted to enter the Adabas SVC number and the Adabas version number of the database designated as the Adabas Review repository.
Type in the SVC and version number, and press ENTER.
Based on the information you provide, Adabas Review creates the default target definition and displays a message.
The Initialization Process screen appears as shown in the following example:
14:37:46 ***** R E V I E W ***** YYYY-MM-DD
Initialization Process HUB=12345
REV00104 - NOW CREATING DEFAULT TARGET DEFINITION
REV00054 - NOW CREATING SAMPLE REPORT SUMMARY REPORT BY FILE
REV00054 - NOW CREATING SAMPLE REPORT EXCEPTIONAL RESPONSE CODES
REV00054 - NOW CREATING SAMPLE REPORT LONG RUNNING COMMANDS
REV00054 - NOW CREATING SAMPLE REPORT COMMANDS BY HOUR
REV00054 - NOW CREATING SAMPLE REPORT RATE OF COMMANDS AND IOS BY HOUR
REV00054 - NOW CREATING SAMPLE REPORT RATE OF COMMANDS AND IOS BY DATE
REV00054 - NOW CREATING SAMPLE REPORT NATURAL SUMMARY
REV00054 - NOW CREATING SAMPLE REPORT WHO IS USING NATURAL
REV00054 - NOW CREATING SAMPLE REPORT NATURAL PROGRAM TRACE
REV00054 - NOW CREATING SAMPLE REPORT WHO USES SYSMAIN
REV00054 - NOW CREATING SAMPLE REPORT TRANSACTION COUNT BY JOB
REV00054 - NOW CREATING SAMPLE REPORT TRANSACTION COUNT BY JOB-NATAPPL
REV00054 - NOW CREATING SAMPLE REPORT TRANSACTION COUNT BY JOB-USER
REV00054 - NOW CREATING SAMPLE REPORT TRANSACTION COUNT BY NATURAL
REV00006 - PRESS 'ENTER' TO CONTINUE INITIALIZATION PROCESS
Enter-PF1---PF2---PF3---PF4---PF5---PF6---PF7---PF8---PF9---PF10--PF11--PF12---
|
The Adabas Review supplied reports are automatically added to the Adabas Review repository. As each report is added, a line is added to the Initialization Process screen. Each time the screen fills, you receive the following prompt:
Press ENTER to continue the initialization process
Press ENTER as requested; continue until all Adabas Review supplied reports are initialized.
After all the reports are initialized, you are returned to the Adabas Review main menu.
To access Adabas Review:
Access Natural as you normally do.
At the NEXT prompt, log on to the library SYSREVDB (type LOGON SYSREVDB).
Note:
Wherever the NEXT prompt is specified, the command can also be
issued from the Natural main menu command line.
At the NEXT prompt, type MENU and press ENTER to access the Adabas Review main menu:
20:35:09 A D A B A S - R E V I E W 2009-04-30
Main Menu HUB=15690
Code Description
---- ---------------------------------
AA Available Adabas Nuclei
AO Adabas Online System
EB Edit Buffer Pool Report
EL Edit Pulse Report
ER Edit Report Definition
ET Edit Target Definition
EX Edit Cluster Services Report
LH List History Reports
LR List Report Definitions
LS List Started Reports
LT List Target Definitions
UP User Profiles
---- ---------------------------------
Command: ______________________________________________________________________
Enter-PF1---PF2---PF3---PF4---PF5---PF6---PF7---PF8---PF9---PF10--PF11--PF12---
Help Fin Fin |
To confirm that Adabas Review is correctly installed, the installation is verified each time you enter the Adabas Review online subsystem.
The following errors may be detected under Com-plete:
| USER BUFFER NOT LARGE ENOUGH | |
| Explanation |
The user buffer extension is not large enough for Adabas Review to pass data to Adabas. The parameter LRVINFO was not set correctly in the link routine.. |
| Action |
Use the procedure in the installation documentation to correctly install the Adabas Review link routine exit in the link routine. |
| ADAPRM IS MISSING FROM THE PARAMETER LIST | |
| Explanation |
The Natural ADAPRM area was not passed in the parameter list for the Adabas call. The value ADAPRM=ON was not set correctly in the parameter module (NATPARM) for the Natural nucleus currently executing. |
| Action |
Use the procedure in the installation documentation to correctly add ADAPRM=ON to the Natural NATPARM parameter module. |
| USER BUFFER EXTENSION NOT LARGE ENOUGH AND | |
| Explanation |
The user buffer extension is not large enough for Adabas Review to pass data to Adabas. The parameter LRVINFO was not set correctly in the Adabas/Com-plete link routine |
| Action |
Use the procedure in the installation documentation to correctly install the Adabas Review link routine exit in the Adabas/Com-plete link routine. |
| ADAPRM IS MISSING FROM THE PARAMETER LIST | |
| Explanation |
The Natural ADAPRM area was not passed in the parameter list for the Adabas call. The value ADAPRM=ON was not set correctly in the parameter module (NATPARM) for the Natural nucleus currently executing. |
| Action |
Use the procedure in the installation documentation to correctly add ADAPRM=ON to the Natural NATPARM parameter module. |
| THE ADABAS REVIEW LINK ROUTINE IS NOT CORRECTLY INSTALLED | |
| Explanation |
The Adabas Review link routine exit is not installed in the copy of the link routine currently being executed. |
| Action |
Use the procedure in the installation documentation to correctly install the Adabas Review link routine exit in the link routine. |
| THE ADABAS REVIEW REPOSITORY HAS NOT BEEN INITIALIZED | |
| Explanation |
Adabas Review could not initialize because the repository file has not been initialized. |
| Action |
Use the procedure in the section Initializing the Adabas Review Data File to correctly initialize the repository file. |
The following errors may be detected under TSO/Batch:
| USER BUFFER NOT LARGE ENOUGH | |
| Explanation |
The user buffer (UB) extension is not large enough for Adabas Review to pass data to Adabas. The parameter LRVINFO was not set correctly in the Adabas/batch link routine. |
| Action |
Use the procedure in the installation documentation to correctly install the Adabas Review link routine exit in the Adabas/batch link routine. |
| ADAPRM IS MISSING FROM THE PARAMETER LIST | |
| Explanation |
The Natural ADAPRM area was not passed in the parameter list for the Adabas call. The value ADAPRM=ON was not set correctly in the parameter module (NATPARM) for the Natural nucleus currently executing. |
| Action |
Use the procedure in the installation documentation to correctly add ADAPRM=ON to the Natural NATPARM parameter module. |
| USER BUFFER EXTENSION NOT LARGE ENOUGH AND | |
| Explanation |
The user buffer extension is not large enough for Adabas Review to pass data to Adabas. The parameter LRVINFO was not set correctly in the Adabas/batch link routine. |
| Action |
Use the procedure in the installation documentation to correctly install the Adabas Review link routine exit in the Adabas/batch link routine. |
| ADAPRM IS MISSING FROM THE PARAMETER LIST | |
| Explanation |
The Natural ADAPRM area was not passed in the parameter list for the Adabas call. The value ADAPRM=ON was not set correctly in the parameter module (NATPARM) for the Natural nucleus currently executing. |
| Action |
Use the procedure in the installation documentation to correctly add ADAPRM=ON to the Natural NATPARM parameter module. |
| THE ADABAS REVIEW LINK ROUTINE IS NOT CORRECTLY INSTALLED | |
| Explanation |
The Adabas Review link routine exit is not installed in the copy of the Adabas/batch link routine currently being executed. |
| Action |
Use the procedure in the installation documentation to correctly install the Adabas Review link routine exit in the Adabas/batch link routine. |
| THE ADABAS REVIEW REPOSITORY HAS NOT BEEN INITIALIZED | |
| Explanation |
Adabas Review could not initialize because the repository file has not been initialized. |
| Action |
Use the procedure in the section Initializing the Adabas Review Data File to correctly initialize the repository file. |
The following errors may be detected under CICS:
| USER BUFFER NOT LARGE ENOUGH | |
| Explanation |
The user buffer extension is not large enough for Adabas Review to pass data to Adabas. The parameter LRVINFO was not set correctly in the Adabas/CICS link routine. |
| Action |
Use the procedure in the installation documentation to correctly install the Adabas Review link routine exit in the Adabas/CICS link routine. |
| ADAPRM IS MISSING FROM THE PARAMETER LIST | |
| Explanation |
The Natural ADAPRM area was not passed in the parameter list for the Adabas call. The value ADAPRM=ON was not set correctly in the parameter module (NATPARM) for the Natural nucleus currently executing. |
| Action |
Use the procedure in the installation documentation to correctly add ADAPRM=ON to the Natural NATPARM parameter module. |
| USER BUFFER EXTENSION NOT LARGE ENOUGH AND ... | |
| Explanation |
The user buffer extension is not large enough for Adabas Review to pass data to Adabas. The parameter LRVINFO was not set correctly in the Adabas/CICS link routine. |
| Action |
Use the procedure in the installation documentation to correctly install the Adabas Review link routine exit in the Adabas/CICS link routine. |
| ADAPRM IS MISSING FROM THE PARAMETER LIST | |
| Explanation |
The Natural ADAPRM area was not passed in the parameter list for the Adabas call. The value ADAPRM=ON was not set correctly in the parameter module (NATPARM) for the Natural nucleus currently executing. |
| Action |
Use the procedure in the installation documentation to correctly add ADAPRM=ON to the Natural NATPARM parameter module. |
| THE ADABAS REVIEW LINK ROUTINE IS NOT CORRECTLY INSTALLED | |
| Explanation |
The Adabas Review link routine exit is not installed in the copy of the Adabas/CICS link routine currently being executed. |
| Action |
Use the procedure in the installation documentation to correctly install the Adabas Review link routine exit in the Adabas/CICS link routine. |
| THE ADABAS REVIEW REPOSITORY HAS NOT BEEN INITIALIZED | |
| Explanation |
Adabas Review could not initialize because the repository file has not been initialized. |
| Action |
Use the procedure in the section Initializing the Adabas Review Data File to correctly initialize the repository file. |
