This section describes the Adabas System Coordinator response code 101 and its subcodes, which are returned in the rightmost two bytes of the Additions 2 field of the Adabas control block.
Subcode 21 | Subcode 22 | Subcode 23 | Subcode 24 | Subcode 25 | Subcode 26 | Subcode 28 | Subcode 29 | Subcode 30 | Subcode 31 | Subcode 32 | Subcode 33 | Subcode 34 | Subcode 35 | Subcode 36 | Subcode 37 | Subcode 38 | Subcode 39 | Subcode 40 | Subcode 41 | Subcode 42 | Subcode 43 | Subcode 44 | Subcode 45 | Subcode 46 | Subcode 47 | Subcode 49 | Subcode 50 | Subcode 52 | Subcode 53 | Subcode 54 | Subcode 55 | Subcode 56 | Subcode 57 | Subcode 58 | Subcode 59 | Subcode 60 | Subcode 62 | Subcode 64 | Subcode 65 | Subcode 66 | Subcode 68 | Subcode 69 | Subcode 81 | Subcode 82 | Subcode 83 | Subcode 84 | Subcode 85 | Subcode 86| Subcode 21 | UAB index: Find error |
| Explanation |
Internal error. |
| Action |
Contact Software AG Support. |
| Subcode 22 | UAB index: Add error |
| Explanation |
Internal error. |
| Action |
Contact Software AG Support. |
| Subcode 23 | UAB chain: Add error |
| Explanation |
Internal error. |
| Action |
Contact Software AG Support. |
| Subcode 24 | CAB: Memory shortage |
| Explanation |
Insufficient memory available for CAB. |
| Action |
Increase the job region size or the system ECSA size. |
| Subcode 25 | CAB: Allocation failed |
| Explanation |
Insufficient memory available for CAB. |
| Action |
Increase the job region size or the system ECSA size. |
| Subcode 26 | UAB: Unattached task chain |
| Explanation |
Internal error. |
| Action |
Contact Software AG Support. |
| Subcode 28 | XHB: Allocation failed |
| Explanation |
Insufficient memory available for XHB. |
| Action |
Increase the job region size or the system ECSA size. |
| Subcode 29 | CAS: No value buffer for V1 |
| Explanation |
Internal error. |
| Action |
Contact Software AG Support. |
| Subcode 30 | CAS: Illegal V1 function code |
| Explanation |
Internal error. |
| Action |
Contact Software AG Support. |
| Subcode 31 | CAS: JOB CIB allocation failed |
| Explanation |
Insufficient memory for CIB allocation. |
| Action |
Increase the job region size or the system ECSA size. |
| Subcode 32 | CAS: Record buffer too small |
| Explanation |
Internal error. |
| Action |
Contact Software AG Support. |
| Subcode 33 | CAS: No record buffer for V1 |
| Explanation |
Internal error. |
| Action |
Contact Software AG Support. |
| Subcode 34 | CAS: Value buffer format error |
| Explanation |
Internal error. |
| Action |
Contact Software AG Support. |
| Subcode 35 | CAS: Memory pool allocation error |
| Explanation |
Insufficient memory available for the memory pool allocation. |
| Action |
Increase the job region size or the system ECSA size. |
| Subcode 36 | CAS: JOB CIB cannot be found |
| Explanation |
Internal error. |
| Action |
Contact Software AG Support. |
| Subcode 37 | CAS: Memory pool function error |
| Explanation |
Internal error. |
| Action |
Contact Software AG Support. |
| Subcode 38 | CAS: Invalid pool function |
| Explanation |
Internal error. |
| Action |
Contact Software AG Support. |
| Subcode 39 | UAB: CAS V1 processor not loaded |
| Explanation |
Internal error. |
| Action |
Contact Software AG Support. |
| Subcode 40 | UAB: CAS VCON list not loaded |
| Explanation |
Internal error. |
| Action |
Contact Software AG Support. |
| Subcode 41 | UAB: Bad ACBRSP from CAS UABREG |
| Explanation |
Internal error. |
| Action |
Contact Software AG Support. |
| Subcode 42 | UAB: Bad ACBRSP from CAS UABUREG |
| Explanation |
Internal error. |
| Action |
Contact Software AG Support. |
| Subcode 43 | Initialization Error |
| Explanation |
An error occurred during job initialization. |
| Action |
Ensure that correct runtime controls were defined for the job. If problem persists, contact Software AG Support. |
| Subcode 44 | UAB: CAS UAB chain header error |
| Explanation |
Internal error. |
| Action |
Contact Software AG Support. |
| Subcode 45 | UAB: CAS dummy UAB allocation error |
| Explanation |
Internal error. |
| Action |
Contact Software AG Support. |
| Subcode 46 | CAS: No group header record |
| Explanation |
This error appears if COR fails to find a header record for the required System Coordinator group. |
| Action |
First check that you have a valid CORCFG module pointing to the correct database and file number for your configuration file. Ensure that the load library containing CORCFG is included in the load library concatenation of the job. If CORCFG is present and correct, logon to SYSCOR and verify that you have valid Daemon Group parameters for the job you are running. If all parameters are correct Contact Software AG Support. |
| Subcode 47 | PLX: Coupling facility caching error |
| Explanation |
Internal error. |
| Action |
Contact Software AG Support. |
| Subcode 49 | DES: Illegal distributed event services call |
| Explanation |
Internal error. |
| Action |
Contact Software AG Support. |
| Subcode 50 | ADAPOP: Illegal Product ID |
| Explanation |
This response may appear when System Coordinator (or add-ons) interrogates the nucleus to determine if the Coordinator and/or add-ons are present or absent. This sub-code indicates the nucleus component of the product is not running. This is not necessarily an error it is simply the result of a check. The response and sub-code are not normally passed to any customer application, but may be seen in nucleus command logs or the System Coordinator network display. |
| Action |
None. |
| Subcode 52 | PLX: User move error |
| Explanation |
Internal error. |
| Action |
Contact Software AG Support. |
| Subcode 53 | CAS: The job is not using SYSCO |
| Explanation |
Internal error. |
| Action |
Contact Software AG Support. |
| Subcode 54 | SSM: Invalid session monitoring request |
| Explanation |
Internal error. |
| Action |
Contact Software AG Support. |
| Subcode 55 | CAS: Cluster unpack error |
| Explanation |
Internal error. |
| Action |
Contact Software AG Support. |
| Subcode 56 | CAS: Pool GET error |
| Explanation |
Internal error. |
| Action |
Contact Software AG Support. |
| Subcode 57 | CAS: GETMAIN error |
| Explanation |
Internal error. |
| Action |
Contact Software AG Support. |
| Subcode 58 | UAB: Concurrent session detected |
| Explanation |
An application has invoked a second Adabas command for a session that is still processing a previous command. |
| Action |
Determine the cause of the concurrent command and modify the application to remove it. |
| Subcode 59 | CORSnn: Critical products |
| Explanation |
One or more products have been defined as "Critical" in the Corrdinator configuration file, and one of the following errors was detected:
|
| Action |
Determine the cause of the failure, correct and restart the job. |
| Subcode 60 | CORKRN: Critical Products |
| Explanation |
One or more products have been defined as "Critical" in the Coordinator configuration file, and the product has indicated a critical error during initialization. |
| Action |
Determine the cause of the failure, correct and restart the job. |
| Subcode 62 | CORS02/CORS12: Subsystem storage protect facility not activated |
| Explanation |
Com-plete has been customised to operate with mixed thread keys, but the IBM subsystem Storage Protection override facility is not enabled. System Coordinator requires this facility to support mixed thread keys in Com-plete. |
| Action |
Do one of the following:
|
| Subcode 64 | Net-Work Clustering: Node not member of Group |
| Explanation |
Internal error. |
| Action |
Contact Software AG Support. |
| Subcode 65 | Net-Work Clustering: Message segment protocol error |
| Explanation |
Internal error. |
| Action |
Contact Software AG Support. |
| Subcode 66 | Net-Work Clustering: Message sequence error |
| Explanation |
Internal error. |
| Action |
Contact Software AG Support. |
| Subcode 68 | Incompatible configuration file |
| Explanation |
The configuration file in use by the client job is not compatible with the COR runtime code. |
| Action |
Ensure that the correct version of the SYSCOR application is used to maintain the configuration file. |
| Subcode 69 | Insufficient memory to initialize runtime controls |
| Explanation |
There is insufficient memory for COR to initialize. |
| Action |
Increase the memory available to the job. |
| Subcode 81 | Internal UB Getmain error |
| Explanation |
Internal error. |
| Action |
Contact Software AG Support. |
| Subcode 82 | Invalid session pointer |
| Explanation |
Internal error. |
| Action |
Contact Software AG Support. |
| Subcode 83 | Internal session UB not found |
| Explanation |
Internal error. |
| Action |
Contact Software AG Support. |
| Subcode 84 | Internal error in Adabas buffer analysis |
| Explanation |
Internal error. |
| Action |
Contact Software AG Support. |
| Subcode 85 | Internal thread getmain error |
| Explanation |
Internal error. |
| Action |
Increase the job region size and rerun the job. If the problem persists contact Software AG Support. |
| Subcode 86 | Invalid command block pointer |
| Explanation |
Internal error. |
| Action |
Contact Software AG Support. |
