
	Version 8.1.4	SEARCH INDEX CONTENTS \| PDF PAGE PDF BOOKS \| HOME UP PREV NEXT

— Utilities —

JCL/JCS Requirements and Examples

This section describes the job control information required to run ADAINV with BS2000, z/OS, z/VM, and VSE systems and shows examples of each of the job streams.

This document covers the following topics:

Collation with User Exit
BS2000
z/OS
z/VM
VSE

Collation with User Exit

If a collation user exit is to be used during ADAINV execution, the ADARUN CDXnn parameter must be specified for the utility run.

Used in conjunction with the universal encoding support (UES), the format of the collation descriptor user exit parameter is

graphics/util_adarun_cdxnn.png

where

nn	is the number of the collation descriptor exit, a two-digit decimal integer in the range 01-08 inclusive.
exit-name	is the name of the user routine that gets control at the collation descriptor exit; the name can be up to 8 characters long.

Only one program may be specified for each collation descriptor exit. Up to 8 collation descriptor exits may be specified (in any order). See the Adabas DBA Reference documentation for more information.

BS2000

Data Set	Link Name	Storage	More Information
Associator	DDASSORn	disk
Intermediate storage	DDTEMPR1	disk
Sort area	DDSORTR1	disk
Sort area	DDSORTR2	disk	When using large files, the Sort area should be split across two volumes (see Note).
Recovery log (RLOG)	DDRLOGR1	disk	Required when using the recovery log option
ADARUN parameters	SYSDTA/ DDCARD		Operations
ADAINV parameters	SYSDTA/ DDKARTE
ADARUN messages	SYSOUT/ DDPRINT		Messages and Codes
ADAINV messages	SYSLST/ DDDRUCK		Messages and Codes

Note:
Performance can be improved when sorting large files if the sort data set is split across two volumes. If two data sets are specified, they must both be on the same device type (SORTDEV parameter), and each must be exactly half the size specified with the SORTSIZE parameter.

ADAINV JCL Examples (BS2000)

Couple Files

In SDF Format:

/.ADAINV LOGON
 /MODIFY-TEST-OPTIONS DUMP=YES
 /REMARK *
 /REMARK * A D A I N V COUPLE FIELD (REFLECTIVE)
 /REMARK *
 /ASS-SYSLST L.INV.COUP
 /ASS-SYSDTA *SYSCMD
 /SET-FILE-LINK DDLIB,ADAvrs.MOD
 /SET-FILE-LINK DDASSOR1,ADAyyyyy.ASSO,SHARE-UPD=YES
 /SET-FILE-LINK DDTEMPR1,ADAyyyyy.TEMP
 /SET-FILE-LINK DDSORTR1,ADAyyyyy.SORT
 /START-PROGRAM *M(ADA.MOD,ADARUN),PR-MO=ANY
 ADARUN PROG=ADAINV,DB=yyyyy,IDTNAME=ADABAS5B
 ADAINV COUPLE FILE=1,3,DESCRIPTOR= AA,AA 
 ADAINV TEMPSIZE=100,SORTSIZE=50
 /LOGOFF SYS-OUTPUT=DEL

In ISP Format:

/.ADAINV LOGON
 /OPTION MSG=FH,DUMP=YES
 /REMARK *
 /REMARK * A D A I N V COUPLE FIELD (REFLECTIVE)
 /REMARK *
 /SYSFILE SYSLST=L.INV.COUP
 /FILE ADA.MOD,LINK=DDLIB
 /FILE ADAyyyyy.ASSOR ,LINK=DDASSOR1,SHARUPD=YES
 /FILE ADAyyyyy.TEMP ,LINK=DDTEMPR1
 /FILE ADAyyyyy.SORT ,LINK=DDSORTR1
 /EXEC (ADARUN,ADA.MOD)
 ADARUN PROG=ADAINV,DB=yyyyy,IDTNAME=ADABAS5B
 ADAINV COUPLE FILE=1,3,DESCRIPTOR= AA,AA 
 ADAINV TEMPSIZE=100,SORTSIZE=50
 /LOGOFF NOSPOOL

Invert File

In SDF Format:

/.ADAINV LOGON
 /MODIFY-TEST-OPTIONS DUMP=YES
 /REMARK *
 /REMARK * A D A I N V INVERT FIELD (REFLECTIVE)
 /REMARK *
 /ASS-SYSLST L.INV.INVE
 /ASS-SYSDTA *SYSCMD
 /SET-FILE-LINK DDLIB,ADAvrs.MOD
 /SET-FILE-LINK DDASSOR1,ADAyyyyy.ASSO,SHARE-UPD=YES
 /SET-FILE-LINK DDTEMPR1,ADAyyyyy.TEMP
 /SET-FILE-LINK DDSORTR1,ADAyyyyy.SORT
 /START-PROGRAM *M(ADA.MOD,ADARUN),PR-MO=ANY
 ADARUN PROG=ADAINV,DB=yyyyy,IDTNAME=ADABAS5B
 ADAINV INVERT FILE=1
 ADAINV TEMPSIZE=100,SORTSIZE=50
 ADAINV FIELD= AC 
 ADAINV SUPDE= S1,UQ=AA(1,3),AD(2,4) 
 /LOGOFF SYS-OUTPUT=DEL

In ISP Format:

/.ADAINV LOGON
 /OPTION MSG=FH,DUMP=YES
 /REMARK *
 /REMARK * A D A I N V INVERT FIELD (REFLECTIVE)
 /REMARK *
 /SYSFILE SYSLST=L.INV.INVE
 /FILE ADA.MOD,LINK=DDLIB
 /FILE ADAyyyyy.ASSOR ,LINK=DDASSOR1,SHARUPD=YES
 /FILE ADAyyyyy.TEMP ,LINK=DDTEMPR1
 /FILE ADAyyyyy.SORT ,LINK=DDSORTR1
 /EXEC (ADARUN,ADA.MOD)
 ADARUN PROG=ADAINV,DB=yyyyy,IDTNAME=ADABAS5B
 ADAINV INVERT FILE=1
 ADAINV TEMPSIZE=100,SORTSIZE=50
 ADAINV FIELD= AC 
 ADAINV SUPDE= S1,UQ=AA(1,3),AD(2,4) 
 /LOGOFF NOSPOOL

z/OS

Data Set	DD Name	Storage	More Information
Associator	DDASSORn	disk
Intermediate storage	DDTEMPR1	disk
Sort area	DDSORTR1	disk
Sort area	DDSORTR2	disk	When using large files, the Sort area should be split across two volumes (see Note).
Recovery log (RLOG)	DDRLOGR1	disk	Required when using the recovery log option
ADARUN parameters	DDCARD	reader	Operations
ADAINV parameters	DDKARTE	reader
ADARUN messages	DDPRINT	printer	Messages and Codes
ADAINV messages	DDDRUCK	printer	Messages and Codes

Note:
Performance can be improved when sorting large files if the sort data set is split across two volumes, but this is difficult to accomplish under OS. Two sort data sets may be specified instead. They must both be on the same device type (SORTDEV parameter), and each must be exactly half the size specified with the SORTSIZE parameter.

ADAINV JCL Example (z/OS)

Couple Files

Refer to ADAINVCO in the JOBS data set for this example.

//ADAINVCO  JOB
//*
//*    ADAINV:  COUPLE FILES
//*
//INV       EXEC PGM=ADARUN
//STEPLIB   DD   DISP=SHR,DSN=ADABAS.ADAvrs.LOAD      <=== ADABAS LOAD
//*
//DDASSOR1  DD   DISP=SHR,DSN=EXAMPLE.DByyyyy.ASSOR1 <===== ASSO
//DDDATAR1  DD   DISP=SHR,DSN=EXAMPLE.DByyyyy.DATAR1 <===== DATA

//DDWORKR1  DD   DISP=SHR,DSN=EXAMPLE.DByyyyy.WORKR1 <===== WORK
//DDTEMPR1  DD   DISP=OLD,DSN=EXAMPLE.DByyyyy.TEMPR1 <===== TEMP
//DDSORTR1  DD   DISP=OLD,DSN=EXAMPLE.DByyyyy.SORTR1 <===== SORT
//DDDRUCK   DD   SYSOUT=X
//DDPRINT   DD   SYSOUT=X
//SYSUDUMP  DD   SYSOUT=X
//DDCARD    DD   *
ADARUN PROG=ADAINV,MODE=MULTI,SVC=xxx,DEVICE=dddd,DBID=yyyyy
/*
//DDKARTE   DD   *
ADAINV COUPLE FILE=2,3,DESCRIPTOR='BB,BB'
ADAINV        TEMPSIZE=100,SORTSIZE=100
/*

Invert File

Refer to ADAINV in the JOBS data set for this example.

//ADAINVDE  JOB
//*
//*     ADAINV:  INVERT A FIELD TO A DE
//*
//INV       EXEC PGM=ADARUN
//STEPLIB   DD   DISP=SHR,DSN=ADABAS.ADAvrs.LOAD      <=== ADABAS LOAD
//*
//DDASSOR1  DD   DISP=SHR,DSN=EXAMPLE.DByyyyy.ASSOR1 <===== ASSO
//DDTEMPR1  DD   DISP=OLD,DSN=EXAMPLE.DByyyyy.TEMPR1 <===== TEMP
//DDSORTR1  DD   DISP=OLD,DSN=EXAMPLE.DByyyyy.SORTR1 <===== SORT
//DDDRUCK   DD   SYSOUT=X
//DDPRINT   DD   SYSOUT=X
//SYSUDUMP  DD   SYSOUT=X
//DDCARD    DD   *
ADARUN PROG=ADAINV,MODE=MULTI,SVC=xxx,DEVICE=dddd,DBID=yyyyy
/*
//DDKARTE   DD   *
ADAINV INVERT FILE=1
ADAINV FIELD='AC'
ADAINV SUPDE='S1,UQ=AA(1,3),AD(2,4)'
ADAINV TEMPSIZE=100,SORTSIZE=100
/*

z/VM

Data Set	DD Name	Storage	More Information
Associator	DDASSORn	disk
Intermediate storage	DDTEMPR1	disk
Sort area	DDSORTR1	disk
Sort area	DDSORTR2	disk	When using large files, the Sort area should be split across two volumes.*
Recovery log (RLOG)	DDRLOGR1	disk	Required when using the recovery log option
ADARUN parameters	DDCARD	disk/ terminal/ reader	Operations
ADAINV parameters	DDKARTE	disk/ terminal/ reader
ADARUN messages	DDPRINT	disk/ terminal/ printer	Messages and Codes
ADAINV messages	DDDRUCK	disk/ terminal/ printer	Messages and Codes

* Performance can be improved when sorting large files if the sort data set is split across two volumes, but this is difficult to accomplish under CMS. Two sort data sets may be specified instead. They must both be on the same device type (SORTDEV parameter), and each must be exactly half the size specified with the SORTSIZE parameter.

ADAINV JCL Examples (z/VM)

Couple Files

DATADEF DDASSOR1,DSN=ADABASVv.ASSO,VOL=ASSOV1
DATADEF DDTEMPR1,DSN=ADABASVv.TEMP,VOL=TEMPV1
DATADEF DDSORTR1,DSN=ADABASVv.SORT,VOL=SORTV1
DATADEF DDPRINT,DSN=ADAINV.DDPRINT,MODE=A
DATADEF DUMP,DUMMY
DATADEF DDDRUCK,DSN=ADAINV.DDDRUCK,MODE=A
DATADEF DDCARD,DSN=RUNINV.CONTROL,MODE=A
DATADEF DDKARTE,DSN=ADAINV.CONTROL,MODE=A
ADARUN

Contents of RUNINV CONTROL A1:

ADARUN PROG=ADAINV,DEVICE=dddd,DB=yyyyy

Contents of ADAINV CONTROL A1:

ADAINV COUPLE FILE=1,3,DESCRIPTOR='AA,AA'
ADAINV        TEMPSIZE=100,SORTSIZE=50
*

Invert File

DATADEF DDASSOR1,DSN=ADABASVv.ASSO,VOL=ASSOV1
DATADEF DDTEMPR1,DSN=ADABASVv.TEMP,VOL=TEMPV1
DATADEF DDSORTR1,DSN=ADABASVv.SORT,VOL=SORTV1
DATADEF DDPRINT,DSN=ADAINV.DDPRINT,MODE=A
DATADEF DUMP,DUMMY                                                     
        
DATADEF DDDRUCK,DSN=ADAINV.DDDRUCK,MODE=A
DATADEF DDCARD,DSN=RUNINV.CONTROL,MODE=A
DATADEF DDKARTE,DSN=ADAINV.CONTROL,MODE=A
ADARUN

Contents of RUNINV CONTROL A1:

ADARUN PROG=ADAINV,DEVICE=dddd,DB=yyyyy

Contents of ADAINV CONTROL A1:

ADAINV INVERT FILE=1
ADAINV        TEMPSIZE=100,SORTSIZE=50
*
ADAINV        FIELD='AC'
ADAINV        SUPDE='S1,UQ=AA(1,3),AD(2,4)'

VSE

File	File Name	Storage	Logical Unit	More Information
Associator	ASSORn	disk	*
Intermediate storage	TEMPR1	disk	*
Sort area	SORTR1	disk	*
Recovery log (RLOG)	RLOGR1	disk	*	Required with recovery log (RLOG) option
ADARUN parameters	- CARD CARD	reader tape disk	SYSRDR SYS000 *
ADAINV parameters	-	reader	SYSIPT
ADARUN messages	-	printer	SYSLST	Messages and Codes
ADAINV messages	-	printer	SYS009	Messages and Codes

* Any programmer logical unit can be used.

ADAINV JCS Examples (VSE)

See Library and File Procedures for VSE Examples for a description of the VSE procedures (PROCs).

Couple Files

Refer to member ADAINVCO.X for this example.

* $$ JOB JNM=ADAINVCO,CLASS=A,DISP=D
* $$ LST CLASS=A,DISP=D
// JOB ADAINVCO
*       COUPLE FILES
// EXEC PROC=ADAVvLIB
// EXEC PROC=ADAVvFIL
// EXEC ADARUN,SIZE=ADARUN
ADARUN PROG=ADAINV,MODE=MULTI,SVC=xxx,DEVICE=dddd,DBID=yyyyy
/*
ADAINV COUPLE FILE=2,3,DESCRIPTOR='BB,BB'
ADAINV        TEMPSIZE=100,SORTSIZE=100
/*
/&
* $$ EOJ

Invert File

Refer to member ADAINV.X for this example.

* $$ JOB JNM=ADAINV,CLASS=A,DISP=D
* $$ LST CLASS=A,DISP=D
// JOB ADAINV
*       INVERT A FIELD TO A DESCRIPTOR
// EXEC PROC=ADAVvLIB
// EXEC PROC=ADAVvFIL
// EXEC ADARUN,SIZE=ADARUN
ADARUN PROG=ADAINV,MODE=MULTI,SVC=xxx,DEVICE=dddd,DBID=yyyyy
/*
ADAINV INVERT FILE=1
ADAINV FIELD='AC'
ADAINV SUPDE='S1,UQ=AA(1,3),AD(2,4)'
ADAINV TEMPSIZE=100,SORTSIZE=100
/*
/&
* $$ EOJ

SEARCH INDEX CONTENTS | PDF PAGE PDF BOOKS | HOME UP PREV NEXT