The CP-NAME is the checkpoint identifier. In the case of a user non-synchronized checkpoint, this is the checkpoint identifier supplied by the user program. Checkpoint names starting with "SYN"" are reserved for the Adabas nucleus and utilities:
SYNC -- A synchronized checkpoint made during nucleus initialization, including the status of the ADARUN IGNDIB and FORCE parameters.
SYNF -- A checkpoint taken by a user program or utility that requires exclusive (EXF) control of one or more files.
SYNP -- A checkpoint from a utility that requires privileged control. Such a utility can perform updating without using the Adabas nucleus.
SYNS -- A checkpoint from Adabas Online System (SYSAOS) or ADADBS with three exceptions from the nucleus. The function identified by this checkpoint is implemented without user intervention during regeneration.
Exceptions include a second SYNS 5B recorded at the end of a nucleus session, SYNS 60 recorded at an interval specified by the ADARUN INTNAS parameter,and SYNS 61 recorded when more space is allocated for a file.
SYNV -- Indicates that a volume ID changed during sequential write to a data set is being closed.
SYNX -- A checkpoint from a utility requiring exclusive control (EXU) of one or more files.
SYN1 -- A checkpoint made at the beginning of online ADASAV execution (SAVE database function).
SYN2 -- A checkpoint made at the end of online ADASAV execution (SAVE database function).
SYN4 -- A checkpoint made at the beginning of online ADASAV execution (SAVE files operation).
SYN5 -- A checkpoint made at the end of online ADASAV execution (SAVE files operation).
The following table describes the checkpoints written by the Adabas nucleus or utilities:
| Type | Name | Originator | Description |
|---|---|---|---|
| 01 | SYNC | ADANUC | Written by nucleus at start of nucleus session. |
| 01 | SYNF | User/Util. | User/utility session OPEN with files used in EXF (exclusive use) mode. |
| 01 | SYNX | EXU user | EXU user open. |
| 02 | SYNV | ADANUC | VOLSER entry. Written at volume switch on DD/SIBA and at the end of the session if sequential logging is used. |
| 03 | SYNF | User/Util. | Close checkpoint for an EXF user. |
| 03 | SYNX | EXU | Close checkpoint for an EXU user. |
| 05 | SYNP | ADASAV | SAVE file(s)-start of operation |
| 06 | SYNP | ADASAV | SAVE database-start of operation |
| 07 | SYNP | ADASAV | RESTORE file(s)-end of operation |
| 08 | SYNP | ADASAV | RESTPLOG-end of operation |
| 09 | SYNV | ADASAV | SAVE file(s), VOLSER entry. Written at volume change on DD/SAVE and at SAVE-operation end. |
| 0A | SYNV | ADASAV | SAVE database, VOLSER entry. Written at volume switch on DD/SAVE and at SAVE-operation end. |
| 0B | SYNP | ADASAV | SAVE DELTA-end of operation |
| 0C | SYNP | ADASAV | RESTORE DELTA-end of operation |
| 0D | SYNP | ADASAV | MERGE-end of operation |
| 0E | SYNV | ADASAV | SAVE DELTA, VOLSER entry |
| 0F | SYNV | ADASAV | MERGE, VOLSER entry |
| 10 | SYNP | ADAINV | COUPLE files |
| 11 | SYNP | ADAINV | INVERT field(s) |
| 15 | SYNP | ADAORD | REORDER Associator database |
| 16 | SYNP | ADAORD | REORDER Data Storage database |
| 17 | SYNP | ADAORD | REORDER database |
| 18 | SYNP | ADAORD | REORDER Associator file |
| 19 | SYNP | ADAORD | REORDER Data Storage file |
| 1A | SYNP | ADAORD | REORDER file |
| 1B | SYNP | ADAORD | STORE |
| 1C | SYNP | ADAORD | RESTRUCTURE |
| 1D | SYNP | ADADEF | DEFINE NEWWORK |
| 1E | SYNP | ADADEF | MODIFY default character encodings |
| 22 | SYNX | ADARES | REGENERATE file |
| 23 | SYNX | ADARES | BACKOUT file |
| 24 | SYNX | ADARES | REGENERATE all; CPEXLIST lists excluded files |
| 25 | SYNX | ADARES | BACKOUT all; CPEXLIST lists excluded files |
| 26 | SYNP | ADARES | REPAIR Data Storage |
| 27 | SYNV | ADARES | COPY sequential protection log |
| 28 | SYNP | ADARES | PLCOPY function successfully completed |
| 28 | SYNV | ADARES | PLCOPY dual or multiple protection log |
| 29 | SYNV | ADARES | CLCOPY dual or multiple command log |
| 2A | SYNP | ADARES | PLCOPY MERGE function successfully completed |
| 2A | SYNV | ADARES | PLCOPY MERGE dual or multiple protection log |
| 2B | SYNP | ADARES | CLOG MERGE function successfully completed |
| 2B | SYNV | ADARES | CLOG MERGE dual or multiple command log |
| 30 | SYNP | ADALOD | LOAD file |
| 31 | SYNP | ADALOD | Mass update |
| 35 | SYNX | ADAULD | Unload file |
| 3F | SYNP | ADAZAP | Successful VERIFY - REPLACE |
| 40 | SYNS | SYSAOS | Add extent |
| 41 | SYNS | SYSAOS | CHANGE default field length |
| 42 | SYNS | SYSAOS | DECREASE database size |
| 44 | SYNS | SYSAOS | Delete file |
| 45 | SYNS | SYSAOS | INCREASE database size |
| 47 | SYNS | SYSAOS | RECOVER space |
| 48 | SYNS | SYSAOS | Refresh file |
| 49 | SYNS | SYSAOS | Remove component file from expanded-file chain |
| 4A | SYNS | SYSAOS | Release descriptor |
| 4B | SYNS | SYSAOS | RENAME file |
| 4C | SYNS | SYSAOS | RENUMBER file |
| 4D | SYNS | SYSAOS | RESET DIB |
| 4E | SYNS | SYSAOS | Reuse ISN |
| 4F | SYNS | SYSAOS | Reuse Data Storage |
| 50 | SYNS | SYSAOS | UNCOUPLE files |
| 51 | SYNS | SYSAOS | ALLOCATE file extent |
| 52 | SYNS | SYSAOS | DEALLOCATE file extent |
| 53 | SYNS | SYSAOS | Delete checkpoint |
| 54 | SYNS | SYSAOS | Set user priority |
| 55 | SYNS | SYSAOS | Modify FCB |
| 57 | SYNS | SYSAOS | DEFINE file |
| 58 | SYNS | SYSAOS | Write FDT |
| 59 | SYNS | SYSAOS | DEFINE new field |
| 5B | SYNS | ADADBS | Write refreshed statistics (some or all per user request) |
| 5B | SYNS | ADANUC | Write (all) statistics at end of nucleus session |
| 5B | SYNS | ADARES | Write refreshed statistics (command, file, and thread usage; DRES and DSTAT) |
| 5C | SYNS | SYSAOS | CHANGE default field format |
| 5D | SYNS | SYSAOS | Change file encoding |
| 5E | SYNS | ADADBS | ADADBS REPTOR function (refer to your Event Replicator for Adabas documentation) |
| 60 | SYNS | ADANUC | Nucleus statistic checkpoint |
| 61 | SYNS | ADANUC | Allocate file space |
| 64 | SYNS | ADASCR | Protect files |
| 65 | SYNS | ADASCR | Protect fields |
| 66 | SYNS | SYSAOS | Link component file into expanded-file chain |
| 68 | SYNS | SYSAOS | Set USERISN on/off |
| 69 | SYNS | SYSAOS | Set MIXDSDEV on/off |
| 6A | SYNS | SYSAOS | Install Delta Save DLOG area |
| 6B | SYNS | SYSAOS | Change Delta Save DLOG area |
| 6C | SYNS | SYSAOS | Remove Delta Save DLOG area |
| 6E | SYNS | ADADBS | ADADBS REPLICATION function (refer to your Event Replicator for Adabas documentation) |
| 6F | SYNS | SYSAOS | Online process initiated |
| 70 | SYNS | SYSAOS | Online invert process |
| 71 | SYNS | SYSAOS | Online reorder process |
| 73 | SYNC | ADANUC | Nucleus (nuclei) successfully quiesced. |
| 74 | SYNC | ADANUC | Nucleus (nuclei) have resumed normal processing. |
| 75 | SYNS | ADANUC | Delete heuri-user-entry after Response 72 was detected during nucleus startup. |
| 76 | SYNS | ADANUC | Delete heuri-user-entry after Response 72 was detected during nucleus session. |
| 77 | SYNS | ADADBS | Enable spanned record support. |
| 78 | SYNS | ADADBS | Enable or disable extended MU or PE fields |
