Review the Report of Tape Creation that accompanies the release package before restoring the release data to disk.
The installation tape contains the following datasets in the sequence indicated in the report:
| Dataset | Contents |
|---|---|
| ATMvrs.JOBS | Installation jobs, utility jobs |
| ATMvrs.LOAD | Executable modules |
| ATMvrs.SYS5 | ADALOD input for the ATM PRR file |
| ATMvrs.SYS6 | ADALOD input for the ATM STJ file |
| ATMvrs.SYS7 | ADALOD input for the user proxy log (UPL) file |
| ATMvrs.SYS8 | ADALOD input for the ET data
file
|
| ATMvrs.INPL | Online Services application |
| ATMvrs.ERRN | Online Services messages |
where vrs is the version, revision, and system maintenance level of the product. Use the comments in the jobs when modifying them to conform to site requirements.
The steps needed for a successful installation are as follows:
Note:
The checklist and Installation Procedure indicate how to install a
new ATM environment. If you need to upgrade an environment from an earlier
version of ATM, refer to Upgrading from Earlier
Versions of ATM for important additional information..
| Step | Description | Job Name |
|---|---|---|
| Before proceeding with the installation, ensure that all necessary preparation has been completed as described in section Before You Install. | ||
| 1 | Restore the libraries from the installation tape. | |
| 2 | Create the transaction manager's database. | ATMI030 |
| 3 | Load the transaction manager files to the transaction manager’s database. | ATM1050 |
| 4 | INPL the Online Services application. | ATM1061 |
| 5 | Define the default job client runtime controls for use by the transaction manager client proxy. | |
| 6 | Prepare the ATM transaction manager job. | ATMI200 |
| 7 | If required, define an Adabas System Coordinator file for migrated transaction records. | |
| 8 | Enable databases for two-phase commit. | |
| 9 | Prepare the Adabas System Coordinator daemons to support ATM. | |
| 10 | Make Adabas Transaction Manager components available as required. |
Following is the general Adabas Transaction Manager installation procedure. The actual installation depends on your particular requirements and the specific contents of the release package provided by Software AG for your site. Information in the release package is intended for your system. If that information differs from the information in this section, use the release package information or contact Software AG technical support for assistance.
If you are using System Maintenance Aid (SMA), refer to the SMA documentation (included on the current edition of the Natural documentation CD). If you are not using SMA, perform steps 1a, 1b and 1c as described in this section:
Note:
If the datasets for more than one product are delivered on the tape,
the dataset COPY.JOB contains the JCL to unload the datasets for all delivered
products from the tape to your disk. After that, you will have to perform the
individual install procedure for each component.
The data set COPY.JOB (label 2) contains the JCL to unload all other existing data sets from tape to disk. To unload COPY.JOB, use the following sample JCL:
//SAGTAPE JOB SAG,CLASS=1,MSGCLASS=X //* --------------------------------- //COPY EXEC PGM=IEBGENER //SYSUT1 DD DSN=COPY.JOB, // DISP=(OLD,PASS), // UNIT=(CASS,,DEFER), // VOL=(,RETAIN,SER=<Tnnnnn>), // LABEL=(2,SL) //SYSUT2 DD DSN=<hilev>.COPY.JOB, // DISP=(NEW,CATLG,DELETE), // UNIT=3390,VOL=SER=<vvvvvv>, // SPACE=(TRK,(1,1),RLSE), // DCB=*.SYSUT1 //SYSPRINT DD SYSOUT=* //SYSIN DD DUMMY //
where: <hilev> is a valid high level qualifier <Tnnnnn> is the tape number <vvvvvv> is the desired volser
Modify the COPY.JOB to conform with your local naming conventions and set the disk space parameters before submitting this job:
set HILEV to a valid high level qualifier
set LOCATION to a storage location
set EXPDT to a valid expiration date
Submit COPY.JOB to unload all other data sets from the tape to your disk.
The transaction manager database holds recovery information and,
depending on the setting of the TMETDATA parameter,
ET data, but no other operational data. The
remaining files are for occasional use for special purposes – to store
diagnostic log information obtained by the transaction manager client proxy,
and to hold details of transactions that were forcibly terminated. The size of
this database depends mainly on the number of transactions that might be in
progress at the same time, and the total amount of
ET data, if any, that the ATM manager will need to
store.
to create the database:
Use sample job ATMI030, modified to meet your requirements, to establish the database.
Initially, define a database with the following component sizes:
DATA: 250 cylinders
ASSO: 50 cylinders
WORK: 50 cylinders
TEMP: 20 cylinders
SORT: 20 cylinders
Enough Data Storage space in the recovery file must be allocated to accommodate the maximum number of concurrently active transactions. The following can be used as a guide for calculating the required Data Storage space:
x times y is the required number of Data Storage blocks,
where x is the maximum number of concurrent
transactions/branches at the local transaction manager, and y is the
average number of compressed recovery records (PRRs) per Data Storage block.
Assume that a compressed PRR requires about 2300 bytes if the transaction has
2000 bytes (compressed) of ET data, and 300 bytes if
there is no ET data. It is recommended to allow a
safety margin of about 50 percent extra space.
Standard block sizes are adequate for most sites. However, if transactions which perform changes to many databases are to be used, it may be necessary to increase the Data Storage block size to accommodate large recovery records.
No ET data will be stored in this
database’s checkpoint file. The following parameters should be adequate for the
checkpoint file.
MAXISN=10,000
DSSIZE=100B
NISIZE=20B
UISIZE=8B
Use the normal reporting utilities to determine whether space shortages are likely to occur.
The recovery record file, suspect transaction file, proxy log file and
ET data file have numbers 5, 6, 7 and 8,
respectively. These file numbers are fixed. Since no application files should
be loaded into this database, there should be no conflict.
If ET data is to be stored in the
transaction manager's database (TMETDATA=ATM), define
file 8 with MAXISN large enough to allow an ISN for each
ETID that will ever be used in this Adabas Transaction Manager’s local system.
A decompressed ET data record occupies about 2
kilobytes. If you choose to store ET data in target
databases (TMETDATA=TARGETS), file 8 will not be used.
For more information, see TMETDATA
parameter.
to load the transaction manager files into the transaction manager's
database:
Use job ATMI050 to define the recovery record, suspect transaction,
proxy log and ET data files in the ATM transaction
manager’s database.
The suggested sizes are adequate for the purposes of testing. You can use the normal reporting utilities to check whether your system needs larger files.
The Adabas Transaction Manager Online Services application is delivered on the installation tape as a NATUNLD dataset created under Natural. The application programs are stored in libraries SYSATM and SYSMTvrs where vrs is the version, revision, and system maintenance level of the product.
to install the Online Services application SYSATM:
Use a Natural utility to install the Online Services application and ERRLODUS to install its messages.
If Natural Security is installed, define the libraries SYSATM and SYSMTvrs (where vrs is the version you are installing, for example 812) and protect as required. You may define MENU as the startup transaction for SYSATM. DO NOT define a startup transaction for SYSMTvrs.
The default client runtime controls for the transaction manager client proxy must be defined. For further information, see Online Services, Client Runtime Controls. See also the section Adabas Transaction Manager Components.
Note:
If you are upgrading from a previous version of ATM, you should
first have installed Version 8.1 of Adabas System Coordinator. As part of this
process, you should have defined a new, empty system file, to contain system
data such as client runtime controls. When using SYSCOR for the first time with
this new file, you would have been given the option of converting data,
including ATM’s client runtime controls, from a previous version of system
file. Refer to the Adabas System Coordinator
documentation for details. If you did not carry out this conversion, and you
wish to use your existing client runtime controls for ATM, log on to SYSATM
now, and you will be guided through the process of converting them.
Note:
If you are upgrading from ATM Version 7.4, you must modify each set
of client runtime controls by providing a value for the Adabas System
Coordinator Group Name.
to define the default client runtime controls for the transaction
manager client proxy:
Start a Natural session and log on to the newly installed SYSATM application. Invoke the Menu function. If you have not defined LFILE 152 for your Natural session, a message will prompt you to define it now. Select Systems Settings, then option LFILE 152 Maintenance. Enter the Database ID and file number of the system file that you created when you installed the Adabas System Coordinator. Enter values for the remaining input fields, and confirm your definition. Now return to the main menu and select the Client Runtime Controls option. For a detailed description of the following step, refer to Online Services, Client Runtime Controls.
On the Client Runtime Controls screen, press PF10 to add a new default definition. Select an appropriate job type and press Enter. On the next screen, enter *DEFAULT as the job name, and press PF5. Now you can specify the default ATM runtime control settings for the selected job type. Make sure that you set the control Adabas Transaction Manager to ON. Set the SVC number that will be used by the Adabas Transaction Manager that you are installing. You must also set the name of the Adabas System Coordinator group in which your client jobs and TP systems will execute. The provided default values for the remaining client runtime controls should be satisfactory for the purpose of completing and verifying the installation. You can review and change them as required once you have completed and verified the installation.
Because the ATM transaction manager executes as a special kind of Adabas nucleus, its JCL is similar to that of a normal Adabas nucleus.
to prepare the ATM transaction manager job:
Make any necessary site-specific changes to ATMI200 so that it can be used as a procedure for a started task.
Ensure that any ADALNK module that can be loaded by the ATM job does not have the Adabas System Coordinator stub linked into it.
Specify ADARUN DTP=TM.
Specify ADARUN TMLOG=NEVER for the purpose of
verifying the installation. Once the verification process has been completed,
reconsider this parameter setting.
Specify ADARUN NONDES=YES. This is the
default setting.
Set other ADARUN parameters as you would for a normal database. For initial testing, the default limits and pool and buffer sizes should be sufficient. You can use the sample parameters in the JOBS library, member TMPARMS, as a basis for the transaction manager’s ADARUN parameters.
See the section Parameters for a description of the ADARUN parameters that affect Adabas Transaction Manager operation.
Note:
An Adabas Transaction Manager must be run in each operating system
image that will participate in distributed transaction processing (DTP). If
more than one Adabas SVC is used in the same system image, an Adabas
Transaction Manager must be run under each Adabas SVC that will participate in
DTP.
If you plan to use ATM in a multi-system dynamic transaction routing
(DTR) environment, you might first need to define an Adabas System Coordinator
file (SYSCO file) to hold migrated transaction records (MTRs) for the ATM
managers that will execute alongside the Adabas System Coordinator daemons in
the group. This file is needed if you plan to use a multi-system DTR
environment in which a client who is not at global transaction status can be
migrated from one system image to another (for example, a CICSplex cluster with
the ATM client runtime control TransactionModel set to
DYNAMIC).
For detailed instructions about creating and defining a SYSCO file, refer to the Adabas System Coordinator documentation. The following paragraphs provide information that you will need when creating the file and making the appropriate definition in SYSCOR.
to define a SYSCO file to contain migrated transaction records:
Define a standard Adabas file to contain MTRs. For the Adabas Transaction Managers in a COR group, a single MTR will be stored for each global transaction whose owner is migrated from one system image to another while the transaction is open; the record will be deleted when the transaction is finally committed or backed out. The following ADALOD parameters should be sufficient for 1000 MTRs at the same time, assuming block sizes of about 4 kilobytes for Data Storage and about 2 kilobytes for Associator:
DSSIZE=50B
NISIZE=30B
UISIZE=5B
During normal use, you can use the standard Adabas reporting utility to check that your file is of adequate size.
In the online system, SYSCOR, of the Adabas System Coordinator, navigate to the list of defined System Coordinator groups. Locate the group associated with your Adabas Transaction Manager, mark it with ‘F’, and press Enter.
At the next screen, press PF10 to add a new SYSCO File definition. Enter the MTR file definition in the pop-up window, as follows, specifying a DBID and file number that are suitable for your installation:
07:57:00 Add File Definition 2006-04-19
C11270M2
Group Name: CORATMGP
File Name: ATMMTR DB ID: 135 File Number: 175 SVC: 254
Description: ATM MIGRATED TRAN RECORDS
Press PF5 to confirm
Command ==>
PF1 Help PF3 Exit PF5 Add |
ATM’s MTR file must be defined with SYSCO file name ATMMTR.
Note:
If you do not create a definition for the MTR file using SYSCOR,
ATM will assume that you have determined that no MTR file is needed. Even so,
an ATM transaction manager might issue a warning message if it finds no
definition. If this happens, and you are sure that you do not need an MTR file,
you can prevent the message from appearing simply by creating a dummy MTR file
definition for the COR group, using SYSCOR.
to enable databases for two-phase commit processing
Ensure that the parameter
ADARUN DTP=RM
is set in every database that participates in global transactions coordinated by Adabas Transaction Manager.
Add the Adabas System Coordinator load library and the Adabas Transaction Manager load library to the STEPLIB DD concatenation.
Ensure that the JCL contains a DD statement for DDWORKR4, and that it identifies a suitable WORK dataset.
Note:
The WORK 4 dataset should be allocated and formatted in the
normal way, using the same block size as the main WORK dataset. It should be at
least as large as the LP parameter of the database or
cluster. In the case of a Cluster Services or Parallel Services database, the
WORK 4 dataset is shared by all members of the cluster.
The ATM load library should be made available to all SYSCO daemons which will run under the same Adabas SVC as an ATM transaction manager.
The SYSCO daemons must be started with the parameter setting
PRODUCT=ATM.
The ATM load library should be made available:
in the STEPLIB of batch jobs, TSO procedures, and JCL procedures for IMS/TM systems that will be used by clients or applications that require Adabas Transaction Manager services;
in either the DFHRPL or the STEPLIB of CICS systems that will be used by clients or applications that require Adabas Transaction Manager services. Software AG recommends that you use DFHRPL. If you are not using the autoinstall feature, see member DFHDUP in the JOBS library for samples of the required CICS program definitions. Please also see the Adabas System Coordinator documentation for details of that component’s CICS requirements.
in the COMPLIB of the JCL procedures for Com-plete systems that will be used by clients or applications that require Adabas Transaction Manager services.
Ensure that the Adabas System Coordinator stub has been linked into the Adabas link modules that will be executed in each of the above environments.
The ATM load library and the Adabas System Coordinator library should be made available:
in the STEPLIB of Adabas Transaction Managers;
in the STEPLIB of multiuser database nucleus jobs that will run with
DTP=RM.
Note:
As in previous releases, there is a requirement to use an unmodified
ADALNK in certain areas. With Version 8.1 this restriction has been reduced to
unmodified ADALNK being needed only when running standalone Adabas utility
jobs.
