
	Version 8.1.3	SEARCH INDEX CONTENTS \| PDF PAGE PDF BOOKS \| HOME UP PREV NEXT

NETS* - NETSIP/NETSIR Initialization Program Messages

The NETSIP/NETSIR initialization program messages are:

Overview of Messages

NETS000 | NETS001 | NETS002 | NETS003 | NETS004 | NETS005 | NETS006 | NETS007 | NETS008 | NETS010 | NETS011 | NETS012 | NETS013 | NETS014 | NETS015 | NETS017 | NETS018 | NETS019 | NETS020 | NETS021 | NETS022 | NETS023 | NETS024 | NETS025 | NETS026 | NETS027 | NETS028 | NETS029 | NETS030 | NETS031 | NETS032 | NETS033 | NETS034 | NETS038 | NETS039 | NETS040 | NETS041 | NETS042 | NETS043 | NETS044 | NETS045 | NETS050 | NETS051 | NETS052 | NETS500 | NETS501 | NETS502 | NETS503 | NETS504 | NETS505 | NETS507 | NETS508 | NETS509 | NETS510 | NETS511 | NETS512 | NETS513 | NETS514 | NETS515 | NETS516 | NETS517 | NETS518 | NETS519 | NETS520 | NETS521 | NETS522 | NETS523 | NETS524 | NETS525 | NETS526 | NETS527 | NETS528 | NETS529 | NETS530 | NETS531 | NETS532 | NETS533 | NETS534 | NETS535 | NETS536 | NETS537 | NETS538 | NETS539 | NETS598 | NETS599 | NETS600 | NETS601 | NETS602 | NETS603 | NETS604 | NETS605 | NETS606 | NETS607 | NETS608 | NETS609 | NETS610 | NETS611 | NETS612 | NETS613 | NETS614 | NETS615 | NETS616 | NETS617 | NETS618 | NETS619 | NETS620 | NETS621 | NETS622 | NETS623 | NETS624 | NETS625 | NETS626 | NETS627 | NETS628 | NETS629 | NETS630 | NETS640 | NETS641 | NETS642 | NETS643 | NETS644 | NETS650

NETS000	Entire Net-Work V5 VSE SIP STARTED SIP IS RUNNING UNDER VSE/systype-mode (yyyy-mm-dd, SM=xxx, ZAP=xxxx) SIP IS RUNNING UNDER OSYS LEVEL Vvvv
Explanation	z/VSE: The NETSIP program has started. `systype` is the z/VSE operating system type and 'mode' is the ECPS (EMODE), z/VM, or 370 operating mode.
System Action	NETSIP continues execution.
User Action	None required. This message is informational only.

NETS001	SUBSID MACRO ERROR
Explanation	The z/VSE operating system release is too low for installing Entire Net-Work. NETSIP received a non-zero return code from the operating system.
System Action	NETSIP backs out any modifications to the system and terminates prematurely.
User Action	Refer to the section Supported Operating System Levels in the Entire Net-Work Release Notes.

NETS002	UNSUPPORTED VSE RELEASE BASED UPON SUBSID
Explanation	z/VSE: A NETSIP validation check indicates an unsupported operating system level.
System Action	NETSIP backs out any modifications to the system and terminates prematurely.
User Action	The z/VSE operating system release is too low for installing Entire Net-Work. Refer to the section Supported Operating System Levels in the Entire Net-Work Release Notes.

NETS003	VSE SYSTEM NOT RUNNING UNDER VM
Explanation	z/VSE: The operating system is not running in a virtual machine in the z/VM environment.
System Action	NETSIP backs out any modifications to the system and terminates prematurely.
User Action	Run the z/VSE system under z/VM, or use a line driver that is not dependent on z/VM.

NETS004	NETSIP NOT RUNNING IN A VIRTUAL PARTITION
Explanation	z/VSE: NETSIP is executing in a 'V=R' partition.
System Action	NETSIP backs out any modifications to the system and terminates prematurely.
User Action	Execute NETSIP in a 'V=V' partition.

NETS005	NO SYSPARM VALUE SPECIFIED FOR SVC
Explanation	z/VSE: NETSIP could not find a SYSPARM input, and the specified SVC has not been 'zapped'.
System Action	NETSIP backs out any modifications to the system and terminates prematurely.
User Action	Either provide the SVC with SYSPARM, or zap the specified SVC with NETSIP.

NETS006	DEFAULT VALUE USED FOR THE SVC
Explanation	z/VSE: No SYSPARM SVC has been used. This message is informational only.
System Action	NETSIP continues execution, no error has occurred.
User Action	NETSIP defaults to use of the zapped SVC.

NETS007	NON-NUMERIC DATA FOUND IN SYSPARM FIELD
Explanation	z/VSE: Either SYSPARM or the default NETSIP SVC contains a non-numeric value.
System Action	NETSIP backs out any modifications to the system and terminates prematurely.
User Action	Correct the specified SYSPARM value, or set the default SVC value to 31.

NETS008	INVALID RANGE SPECIFIED FOR THE SVC 30-256
Explanation	z/VSE: NETSIP found an SVC less than 30 or greater than 256 in SYSPARM or the NETSIP default SVC.
System Action	NETSIP backs out any modifications to the system and terminates prematurely.
User Action	Set the SVC to a value within the range 30-256.

NETS010	NETSVCxx WAS NOT FOUND IN THE SVA
Explanation	z/VSE: While performing a z/VSE load, NETSIP found that the specified level NETSVC was not in the SVA.
System Action	NETSIP backs out any modifications to the system and terminates prematurely.
User Action	Relink the Entire Net-Work SVC with SVA using the z/VSE 'PHASE' statement, or do the SET SDL for NETSVCxx (z/VSE).

NETS011	NO MATCH ON ID - INCORRECT NETSVC LOADED
Explanation	z/VSE: NETSIP found an incorrect SVC version while trying to do a load operation.
System Action	NETSIP backs out any modifications to the system and terminates prematurely.
User Action	Relink NETSVCV5 with the correct Version 5 SVC module.

NETS012	SVC TABLE ENTRY WAS FOUND TO BE INVALID
Explanation	z/VSE: The SVC number provided by SYSPARM is either not valid, or does not represent either the old or new version of the z/VSE Entire Net-Work SVC. This error can occur if the UPSI statement's 'C' parameter specified '1'.
System Action	NETSIP backs out any modifications to the system and terminates prematurely.
User Action	Respecify the UPSI statement, or specify another unused SVC value. Rerun NETSIP.

NETS013	NETSIP HAS ALREADY RUN BEFORE
Explanation	z/VSE: NETSIP found that the same program is being run again.
System Action	NETSIP backs out any modifications to the system and terminates prematurely.
User Action	The SVC is not installed. To reinstall the same SVC, you must first perform a SET SDL.

NETS014	NON-ZERO RETURN CODE FROM NETSVC
Explanation	z/VSE: The initial invocation of the Entire Net-Work SVC completed abnormally.
System Action	NETSIP backs out any modifications to the system and terminates prematurely.
User Action	Verify that the correct version of the SVC has been loaded into the SVA, then rerun NETSIP.

NETS015	CPIT TABLE NOT FOUND IN SVA
Explanation	z/VSE: A request was made for NETSIP to snap the Entire Net-Work areas but the cross-product interface table could not be located in the SVA.
System Action	NETSIP backs out any modifications to the system and terminates prematurely.
User Action	Correct this problem by making sure that there is a SET SDL done for the CPIT (XPR$CPIT).

NETS017	SVC TABLE CANNOT BE LISTED UNDER MVS/ESA
Explanation	z/VSE: The NETSIP program does not support the listing of the z/VSE SVCTAB for the operating system z/VSE/MVT.
System Action	NETSIP puts out this message and terminates prematurely.
User Action	Consult the z/VSE/MVT manual to install a user SVC.

NETS018	INVALID KEYWORD WAS FOUND IN THE PARM FIELD
Explanation	z/VSE: The parameter field specified on the z/VSE EXEC statement contained a keyword that was not recognized.
System Action	NETSIP puts out this message and terminates prematurely.
User Action	Correct the parameter value and rerun NETSIP.

NETS019	NON NUMERIC DATA FOUND IN THE QSIZE FIELD
Explanation	z/VSE: The value for the QSIZE parameter was not numeric.
System Action	NETSIP puts out this message and terminates prematurely.
User Action	Correct the parameter value and rerun NETSIP.

NETS020	INVALID LENGTH FOR THE RESID FIELD
Explanation	z/VSE: The value for the RESID parameter was longer than eight characters.
System Action	NETSIP puts out this message and terminates prematurely.
User Action	Correct the parameter value and rerun NETSIP.

NETS021	NON ZERO RETURN CODE FROM IUCV QUERY
Explanation	z/VSE: The program NETSIP has detected a non zero condition from the IUCV query for max. connections.
System Action	NETSIP backs out any modifications to the system and terminates prematurely.
User Action	Contact local Entire Net-Work support personnel.

NETS022	UNABLE TO HOOK EXTERNAL FLIH
Explanation	z/VSE: The program NETSIP was unable to locate from the existing external FLIH the address of the savearea used by that FLIH.
System Action	NETSIP backs out any modifications to the system and terminates prematurely.
User Action	Contact local Entire Net-Work support personnel.

NETS023	UNABLE TO ACQUIRE COMMON STORAGE VIA GETVIS
Explanation	z/VSE: The program NETSIP was unable to acquire GETVIS storage in the SVA for the necessary control blocks.
System Action	NETSIP backs out any modifications to the system and terminates prematurely.
User Action	Increase the size of real GETVIS storage in the SVA and IPL the z/VSE system.

NETS024	IUCV ERROR DURING CONNECT FUNCTION
Explanation	z/VSE: The program NETSIP detected a non zero return code from the dummy IUCV connect to determine MSGLIMIT.
System Action	NETSIP backs out any modifications to the system and terminates prematurely.
User Action	Contact local Entire Net-Work support personnel.

NETS025	UNABLE TO ACQUIRE INTQ STORAGE VIA GETVIS
Explanation	z/VSE: The program NETSIP could not acquire storage in the SVA for either the Entire Net-Work 5 interrupt queue or the path table.
System Action	NETSIP backs out any modifications to the system and terminates prematurely.
User Action	Increase the size of real GETVIS storage in the SVA and IPL the z/VSE system.

NETS026	STXIT AB HAS BEEN ENTERED IN NETINIT
Explanation	z/VSE: The NETSIP abend handler has been entered while running this utility.
System Action	NETSIP backs out any modifications to the system and terminates prematurely.
User Action	Contact local Entire Net-Work support personnel.

NETS027	NON ZERO RETURN CODE FROM SEVER
Explanation	z/VSE: The program NETSIP has detected a non zero return from the IUCV sever function.
System Action	NETSIP backs out any modifications to the system and terminates prematurely.
User Action	Contact local Entire Net-Work support personnel.

NETS028	IUCV PRODUCT ENTRY NOT IN CPIT
Explanation	z/VSE: The program NETSIP has detected that it could not find a IUCV product entry in the CPIT in the SVA (XPR$CPIT).
System Action	NETSIP backs out any modifications to the system and terminates prematurely.
User Action	Contact local Entire Net-Work support personnel.

NETS029	DECLARE BUFFER ALREADY DONE
Explanation	z/VSE: The program NETSIP has detected that another program has previously done an IUCV declare buffer and the program NETSIP cannot find the necessary entries in the CPIT to obtain the address of the external buffer.
System Action	NETSIP backs out any modifications to the system and terminates prematurely.
User Action	Contact local Entire Net-Work support personnel.

NETS030	NO FREE SLOTS IN CPIT
Explanation	z/VSE: The Cross Product Interface Table is full.
System Action	NETSIP backs out any modifications to the system and terminates prematurely.
User Action	Contact local Entire Net-Work support personnel.

NETS031	LOAD FAILED FOR XPR$CPIT
Explanation	z/VSE: The program NETSIP detected a non zero return code from the z/VSE load macro for the CPIT table (XPR$CPIT).
System Action	NETSIP backs out any modifications to the system and terminates prematurely.
User Action	Check that you have done a SET SDL for the phase XPR$CPIT into the SVA.

NETS032	XPR$CPIT NOT IN SVA
Explanation	z/VSE: The program NETSIP has detected via the z/VSE load macro that the phase XPR$CPIT was found but not in the SVA.
System Action	NETSIP backs out any modifications to the system and terminates prematurely.
User Action	Check that you have done a SET SDL for the phase XPR$CPIT into the SVA.

NETS033	XPR$CPIT NOT IN SDL
Explanation	z/VSE: The program NETSIP has detected in scanning the SVA SDL that the phase XPR$CPIT was not found.
System Action	NETSIP backs out any modifications to the system and terminates prematurely.
User Action	Check that you have done a SET SDL for the phase XPR$CPIT into the SVA.

NETS034	INITIALIZATION LOGIC ERROR DETECTED
Explanation	z/VSE: The program NETSIP has detected that it is running with a z/VM generated supervisor, however, the 370 support module has received control.
System Action	NETSIP backs out any modifications to the system and terminates prematurely.
User Action	Contact your Software AG technical support representative.

NETS038	NETSVCxx IS RMODE=ANY
Explanation	z/VSE: NETSVC has been link-edited incorrectly, i.e., with RMODE=ANY.
System Action	NETSIP backs out any modifications to the system and terminates prematurely.
User Action	Refer to the sample link-edit JCS LINKIUCV.X to correctly link edit NETSVC with RMODE=24.

NETS039	NETSIP IS AMODE=31
Explanation	z/VSE: NETSIP has detected a 31-bit addressing capability and has switched to AMODE=31. This is an informational message that appears only on z/VSE Version 2.6 or above.
System Action	None.
User Action	None.

NETS040	NETSVCxx svcnumb INSTALLED
Explanation	z/VSE: NETSIP has installed Version 5 SVC 'svcnumb successfully.
System Action	NETSIP terminates normally.
User Action	None required. This message is informational only.

NETS041	NETSIP TERMINATED ABNORMALLY
Explanation	z/VSE: NETSIP was stopped by an unrecoverable error. This message is accompanied by other messages describing the problem.
System Action	NETSIP has encountered an error and backed out all modifications made to the system.
User Action	Refer to the 'action' descriptions in the accompanying messages.

NETS042	xxxxxx = SVC ADDRESS
Explanation	z/VSE: This is an informational message that provides the SVC address of NETSVC.
System Action	None.
User Action	None.

NETS043	xxxxxx = COMMON AREA ADDRESS
Explanation	z/VSE: This is an informational message that provides the common area address. In z/VM mode, this message is meaningless and does not appear.
System Action	None.
User Action	None.

NETS044	xxxxxx = INTERRUPT QUEUE ADDRESS
Explanation	z/VSE: This is an informational message that provides the interrupt queue address. In z/VM mode, this message is meaningless and does not appear.
System Action	None.
User Action	None.

NETS045	xxxxxx = PATH TABLE ADDRESS
Explanation	z/VSE: This is an informational message that provides the path table address. In z/VM mode, this message is meaningless and does not appear.
System Action	None.
User Action	None.

NETS050	AREAS HAVE BEEN SNAPPED TO SYSLST
Explanation	z/VSE: The NETSIP program has snapped certain areas based upon the user setting the upsi 80 byte and these areas have now been snapped to SYSLST.
System Action	NETSIP terminates normally after the printing the data.
User Action	None required. This message is informational only.

NETS051

VSE SVC nnnn is xxxxxx

Explanation

z/VSE: The program NETSIP lists the z/VSE SVCTAB indicating used and unused SVCs.

System Action

This is an informational message and no further action is taken.

User Action

The user can select an unused SVC for the Entire Net-Work z/VSE SVC:

nnnn	z/VSE SVC Number
xxxxxx	is either used or unused status.

NETS052	VSE SVC TABLE AUDIT COMPLETED
Explanation	z/VSE: The program NETSIP has completed the listing of the z/VSE SVCTAB.
System Action	This is an informational message and no further action is taken.
User Action	None required. This message is informational only.

NETS500	Entire Net-Work 5 INSTALLATION PROGRAM NETSIP (yyyy-mm-dd, SM=sm, ZAP=zap) OPERATING SYSTEM ===> sys
Explanation	MVS: The message indicates that NETSIP has started execution. The system maintenance and zap levels are displayed and the operating system environment (MVS/SP, MVS/XA or MVS/ESA)
System Action	NETSIP continues execution.
User Action	None required. This message is informational only.

NETS501	ERROR(S) DETECTED IN EXTRACT PROCESSING: I=> parm-string
Explanation	MVS: The parameter extraction process has encountered a string that could not be parsed.
System Action	The parameter string in error is displayed with the error string underscored. NETSIP terminates abnormally with a dump.
User Action	Correct the parameter string and rerun the job.

NETS502	ERROR(S) DETECTED IN VALIDATE PROCESSING:
Explanation	MVS: The parameter validation process has encountered an invalid parameter value.
System Action	This message is followed by one of the messages NETS503 through NETS514 which supplies further information. NETSIP terminates abnormally with a dump.
User Action	Correct the parameter value and rerun the job.

NETS503	KEYWORD=CONSID, VALUE=consid
Explanation	MVS: The value 'consid' is invalid for the CONSID parameter.
System Action	This message is preceded by the message NETS502. NETSIP terminates abnormally with a dump.
User Action	Correct the CONSID parameter value and rerun the job.

NETS504	KEYWORD=CSTORAGE, VALUE=cstorage
Explanation	MVS: The value 'cstorage' is invalid for the CSTORAGE parameter.
System Action	This message is preceded by the message NETS502. NETSIP terminates abnormally with a dump.
User Action	Correct the CSTORAGE parameter value and rerun the job.

NETS505	KEYWORD=CSUBSYS, VALUE=csubsys
Explanation	MVS: The value 'csubsys' is invalid for the CSUBSYS parameter.
System Action	This message is preceded by the message NETS502. NETSIP terminates abnormally with a dump.
User Action	Correct the CSUBSYS parameter value and rerun the job.

NETS507	KEYWORD=LEAVE, VALUE=leave
Explanation	MVS:The value 'leave' is invalid for the LEAVE parameter.
System Action	This message is preceded by the message NETS502. NETSIP terminates abnormally with a dump.
User Action	Correct the LEAVE parameter value and rerun the job.

NETS508	KEYWORD=NSUBSYS, VALUE=nsubsys
Explanation	MVS: The value 'nsubsys' is invalid for the NSUBSYS parameter.
System Action	This message is preceded by the message NETS502. NETSIP terminates abnormally with a dump.
User Action	Correct the NSUBSYS parameter value and rerun the job.

NETS509	KEYWORD=PSTORAGE, VALUE=pstorage
Explanation	MVS: The value 'pstorage' is invalid for the PSTORAGE parameter.
System Action	This message is preceded by the message NETS502. NETSIP terminates abnormally with a dump.
User Action	Correct the PSTORAGE parameter value and rerun the job.

NETS510	KEYWORD=QSIZE, VALUE=qsize
Explanation	MVS: The value 'qsize' is invalid for the QSIZE parameter.
System Action	This message is preceded by the message NETS502. NETSIP terminates abnormally with a dump.
User Action	Correct the QSIZE parameter value and rerun the job.

NETS511	KEYWORD=REPLACE, VALUE=replace
Explanation	MVS: The value 'replace' is invalid for the RESTORE parameter.
System Action	This message is preceded by the message NETS502. NETSIP terminates abnormally with a dump.
User Action	Correct the RESTORE parameter value and rerun the job.

NETS512	KEYWORD=SNAP, VALUE=snap
Explanation	MVS: The value 'snap' is invalid for the SNAP parameter.
System Action	This message is preceded by the message NETS502. NETSIP terminates abnormally with a dump.
User Action	Correct the SNAP parameter value and rerun the job.

NETS513	KEYWORD=SVCNR, VALUE=svcnr
Explanation	MVS: The value 'svcnr' is invalid for the SVCNR parameter.
System Action	This message is preceded by the message NETS502. NETSIP terminates abnormally with a dump.
User Action	Correct the SVCNR parameter value and rerun the job.

NETS514	KEYWORD=SVCTAB, VALUE=svctab
Explanation	MVS: The value 'svctab' is invalid for the SVCTAB parameter.
System Action	This message is preceded by the message NETS502. NETSIP terminates abnormally with a dump.
User Action	Correct the SVCTAB parameter value and rerun the job.

NETS515	INVALID OPERATING SYSTEM DETECTED - NOT MVS
Explanation	MVS: An attempt was made to execute the MVS version of NETSIP in an environment other than MVS.
System Action	NETSIP terminates abnormally with a dump.
User Action	Execute the version of NETSIP which matches your system or upgrade your system to a supported level of MVS.

NETS516	EXECUTE PARAMETER LENGTH GREATER THAN MAXIMUM (68)
Explanation	MVS: A parameter value longer than 68 bytes was encountered.
System Action	NETSIP terminates abnormally with a dump.
User Action	Correct the NETSIP parameters.

NETS517	CATASTROPHIC CONDITION OCCURRED IN EXTRACT
Explanation	MVS: An unexpected delimiter value was encountered during parameter paring.
System Action	NETSIP terminates abnormally with a dump.
User Action	Correct the NETSIP parameters.

NETS518	TERMINAL ERROR(S) DETECTED IN PARAMETER PROCESSING
Explanation	MVS: A parameter error was encountered.
System Action	This message is preceded by messages which explain the error in detail.
User Action	Correct the NETSIP parameters.

NETS519	PROGRAM ADDRESSING MODE INCORRECT (NOT AMODE=31)
Explanation	MVS: In an MVS/XA or MVS/ESA environment one or more of the programs NETSIR, NETFLIH or NETSVC was link edited to run with addressing mode 24.
System Action	NETSIP terminates abnormally with a dump.
User Action	Check the addressing mode of the programs and relink with AMODE 31.

NETS520	PROGRAM RESIDENCY MODE INCORRECT (NOT RMODE=24)
Explanation	MVS: In an MVS/XA or MVS/ESA environment one or more of the programs NETSIR, NETFLIH or NETSVC was linked to run with residency mode ANY.
System Action	NETSIP terminates abnormally with a dump.
User Action	Check the residency mode of the programs and relink with RMODE 24.

NETS521	PROGRAM NOT APF AUTHORIZED
Explanation	MVS: NETSIP was not loaded from an APF Authorized library, an unauthorized library was contained in the STEPLIB concatenation or NETSIP was not link edited with SETCODE AC(1).
System Action	NETSIP terminates abnormally with a dump.
User Action	Check the APF status of the load library and if necessary relink NETSIP SETCADE AC(1).

NETS522	OPERATING SYSTEM IS NOT A VIRTUAL MACHINE GUEST
Explanation	MVS: The MVS system NETSIP is executing on is not running under z/VM.
System Action	NETSIP terminates abnormally with a dump.
User Action	Chose another access method suited to physical environments such as VTAM or Channel-to-Channel.

NETS523	LOAD FAILURE FOR PROGRAM - pgmname
Explanation	MVS: The program 'pgmname' could not be loaded.
System Action	NETSIP backs out any modifications to the system and terminates with a dump.
User Action	Check the library definition for the program in the execution JCL.

NETS524	ACRONYM CHECK FAILURE FOR PROGRAM - pgmname
Explanation	MVS: NETSIP encountered an incorrect version the program 'pgmname .
System Action	NETSIP backs out any modifications to the system and terminates with a dump.
User Action	Verify that the correct version of this program is in the load library.

NETS525	RECOVERY ENVIRONMENT CREATION FAILURE (ESTAE)
Explanation	MVS: NETSIP was unable to establish an error recovery routine.
System Action	NETSIP backs out any modifications to the system and terminates with a dump.
User Action	Contact local Entire Net-Work support personnel.

NETS526	CPIT SUBSYSTEM FOR CROSS PRODUCT INTERFACE TABLE
Explanation	MVS: The Cross Product Interface Table SSCVT already installed.
System Action	NETSIP continues processing if the REPLACE parameter was specified, otherwise NETSIP backs out any modifications to the system and terminates with a dump.
User Action	None required. This message is informational only. verify that NETSIP is to be rerun and specify the REPLACE parameter.

NETS527	CPIT SUBSYSTEM FOR CROSS PRODUCT INTERFACE INSTALLED
Explanation	MVS: The Cross Product Interface Table SSCVT has been successfully installed.
System Action	NETSIP continues processing.
User Action	None required. This message is informational only.

NETS528	subs SUBSYSTEM INITIALIZATION FAILURE
Explanation	MVS: The subsystem 'subs' could not be added to the SSCVT chain.
System Action	NETSIP backs out any modifications to the system and terminates with a dump.
User Action	Contact local Entire Net-Work support personnel.

NETS529	subs SUBSYSTEM HAS BEEN REMOVED
Explanation	MVS: The subsystem 'subs' was removed from the SSCVT chain during error recovery
System Action	NETSIP continues with error recovery.
User Action	Correct the problem which caused the original error.

NETS530	SVCTABLE UPDATE FAILURE - SVC NUMBER XXX
Explanation	MVS: NETSIP could not modify the MVS SVCTABLE to suit the Entire Net-Work SVC.
System Action	NETSIP backs out any modifications to the system and terminates with a dump.
User Action	Contact local Entire Net-Work support personnel.

NETS531	OPEN/BLDL FAILURE - DDNAME=libname
Explanation	MVS: NETSIP could not open or build a directory for the library libname.
System Action	NETSIP backs out any modifications to the system and terminates with a dump.
User Action	Check the DDNAME in the JCL.

NETS532	GETMAIN FAILURE - S=sbp, L=length(D)
Explanation	MVS: NETSIP could not allocate required storage in the length of 'length' in the subpool 'sbp' .
System Action	NETSIP backs out any modifications to the system and terminates with a dump.
User Action	Verify that the subpool has sufficient storage and that the REGION parameter is set high enough.

NETS533	FREEMAIN FAILURE - S=sbp, L=length(D), A=address(H)
Explanation	MVS: NETSIP could not free allocated storage at location 'address' in the length of 'length' in the subpool 'sbp .
System Action	NETSIP backs out any modifications to the system and terminates with a dump.
User Action	Contact the local Entire Net-Work support personnel.

NETS534	Entire Net-Work 5 SUBSYSTEM HAS BEEN INSTALLED
Explanation	MVS: The Entire Net-Work SSCVT has been successfully installed.
System Action	NETSIP continues processing.
User Action	None required. This message is informational only.

NETS535	Entire Net-Work 5 SUBSYSTEM IS ALREADY INSTALLED
Explanation	MVS: An Entire Net-Work SSCVT was encountered and the REPLACE parameter was not specified.
System Action	NETSIP backs out any modifications to the system and terminates with a dump.
User Action	Check if the Entire Net-Work environment has been successfully installed and specify the REPLACE parameter if not.

NETS536	Entire Net-Work 5 SUBSYSTEM HAS BEEN REMOVED
Explanation	MVS: An Entire Net-Work SSCVT was removed from the SSCVT chain during error recovery.
System Action	NETSIP continues with error recovery.
User Action	Correct the problem which caused the original error.

NETS537	Entire Net-Work 5 SVC svcno HAS BEEN INSTALLED
Explanation	MVS: The Entire Net-Work SVC has been successfully installed as SVC number 'svcno .
System Action	NETSIP continues processing.

NETS538	Entire Net-Work 5 SVC HAS BEEN REMOVED FROM THE SYSTEM
Explanation	MVS: An Entire Net-Work SVC was removed from the system SVCTABLE during error recovery
System Action	NETSIP continues with error recovery.
User Action	Correct the problem which caused the original error.

NETS539	Entire Net-Work 5 SVC COULD NOT BE REMOVED FROM THE SYSTEM
Explanation	MVS: An Entire Net-Work SVC could not be removed from the system SVCTABLE during error recovery
System Action	NETSIP continues with error recovery.
User Action	Correct the problem which caused the original error and specify the REPLACE parameter.

NETS598	NETSIP - NETSIR INITIALIZATION FAILED
Explanation	MVS: NETSIP has encountered errors during execution.
System Action	NETSIP terminates abnormally with a dump. Other error messages precede this message.
User Action	Refer to the error message and correct the error.

NETS599	NETSIP - NORMAL TERMINATION
Explanation	MVS: The Entire Net-Work environment has been successfully initialized.
System Action	NETSIP terminates normally.
User Action	None required. This message is informational only.

NETS600	NETSIR (yyyy-mm-dd, SM=sm, ZAP=zap)
Explanation	MVS: The message indicates that NETSIR has started execution. The system maintenance and zap levels are displayed.
System Action	NETSIP continues execution.
User Action	None required. This message is informational only.

NETS601	NETW Entire Net-Work 5 INITIALIZATION PARAMETER NOT RECOGNIZED
Explanation	MVS: The parameter parsing process has encountered an invalid parameter name.
System Action	NETSIR terminates abnormally.
User Action	Correct the parameter value and rerun the job.

NETS602	NETW Entire Net-Work 5 INITIALIZATION PARAMETER(S) ERROR
Explanation	MVS: The parameter validation process has encountered an invalid parameter value.
System Action	NETSIR terminates abnormally.
User Action	Correct the parameter value and rerun the job.

NETS603	NETW ENTER Entire Net-Work COMMON AREA SUBPOOL (C =CSA OR S =SQA) ------- OR 'A' TO ABORT Entire Net-Work 5 INITIALIZATION
Explanation	MVS: The value specified for the CSTORAGE parameter is invalid.
System Action	NETSIR prompts the operator to enter a correct value.
User Action	Enter the correct value for the parameter or 'A' to terminate NETSIR processing.

NETS604	NETW LEAVE MESSAGE NETS650 OR NETS631 THRU NETS649 (N OR Y)
Explanation	MVS: The value specified for the LEAVE parameter is invalid.
System Action	NETSIR prompts the operator to enter a correct value.
User Action	Enter the correct value.

NETS605	NETW ENTER Entire Net-Work 5 INTERRUPT QUEUE SIZE NETW ENTER Entire Net-Work 5 INTERRUPT QUEUE SIZE (0-9999) OR 'A' TO ABORT Entire Net-Work 5 INITIALIZATION
Explanation	MVS: The value specified for the QSIZE parameter is invalid.
System Action	NETSIR prompts the operator to enter a correct value.
User Action	Enter the correct value for the parameter or 'A' to terminate NETSIR processing.

NETS606	NETW ENTER Entire Net-Work 5 SVC NUMBER (200-255) OR 'A' TO ABORT Entire Net-Work 5 INITIALIZATION TO ABORT Entire Net-Work 5 INITIALIZATION
Explanation	MVS: The value specified for the SVCNR parameter is invalid.
System Action	NETSIR prompts the operator to enter a correct value.
User Action	Enter the correct value for the parameter or 'A' to terminate NETSIR processing.

NETS607	NETW PROMPT OPERATOR TO UPDATE SVC TABLE ENTRY (N or P)
Explanation	MVS: The value specified for the SVCTAB parameter is invalid.
System Action	NETSIR prompts the operator to enter a correct value.
User Action	Enter the correct value.

NETS607	NETW Entire Net-Work 5 SVC svc TABLE ENTRY AT svctaddr INVALID: IS value1 value2 SHOULD BE value3 value4
Explanation	MVS: The value 'P' was specified for the SVCTAB parameter and the entry for SVC 'svc' located at address 'svctaddr' contained the values 'value1' and 'value2 . The values 'value3' and 'value4' are required.
System Action	This message is followed by message NETS608.
User Action	None required. This message is informational only.

NETS608	NETW SHOULD SVC TABLE ENTRY BE CHANGED ( Y ) OR SHOULD Entire Net-Work 5 INITIALIZATION BE ABORTED (N )?
Explanation	MVS: The value 'P' was specified for the SVCTAB parameter and an invalid SVCTABLE entry was encountered.
System Action	NETSIR prompts the operator to enter a correct value. This message is preceded by message NETS607.
User Action	Enter the correct value.

NETS609	NETW SVC XXX TABLE ENTRY CHANGED WITHOUT PROMPTING OPERATOR
Explanation	MVS: The value 'N' was specified for the SVCTAB parameter and an invalid SVCTABLE entry was encountered.
System Action	NETSIR modifies the SVCTABLE and continues processing.
User Action	None required. This message is informational only.

NETS610	NETW NON ZERO RETURN CODE FROM IUCV QUERY
Explanation	MVS: The program NETSIR has detected a non zero condition from the IUCV query for max. connections.
System Action	NETSIR backs out any modifications to the system and terminates abnormally.
User Action	Contact local Entire Net-Work support personnel.

NETS611	NETW UNABLE TO ACQUIRE COMMON STORAGE VIA GETMAIN
Explanation	MVS: The program NETSIR was unable to acquire common storage in the page-fixed CSA or SQA for the necessary control blocks.
System Action	NETSIR backs out any modifications to the system and terminates abnormally.
User Action	Specify the other page-fixed storage area or increase the size of the fixed CSA or SQA and IPL the MVS system.

NETS612	NETW IUCV ERROR DURING CONNECT FUNCTION
Explanation	MVS: NETSIR detected a non zero return code from the dummy IUCV connect to determine MSGLIMIT.
System Action	NETSIR backs out any modifications to the system and terminates abnormally.
User Action	Contact local Entire Net-Work support personnel.

NETS613	NETW UNABLE TO ACQUIRE INTQ STORAGE VIA GETMAIN
Explanation	MVS: The program NETSIR was unable to acquire storage in the page-fixed CSA or SQA for either the Entire Net-Work 5 interrupt queue or the path table.
System Action	NETSIR backs out any modifications to the system and terminates abnormally.
User Action	Specify the other page-fixed storage area or increase the size of the fixed CSA or SQA and IPL the MVS.

NETS614	NETW ESTAE EXIT HAS BEEN ENTERED IN NETSIR
Explanation	MVS: The NETSIR abend handler has been entered while running this utility.
System Action	NETSIR backs out any modifications to the system and terminates abnormally. If the SIRDUMP file is available a dump of the SDWA will be printed.
User Action	Contact local Entire Net-Work support personnel.

NETS615	NETW NON ZERO RETURN CODE FROM SEVER
Explanation	MVS: NETSIR has detected a non zero return from the IUCV sever function.
System Action	NETSIR backs out any modifications to the system and terminates abnormally.
User Action	Contact local Entire Net-Work support personnel.

NETS616	NETW IUCV PRODUCT ENTRY NOT IN CPIT
Explanation	MVS: NETSIR has detected that the Cross Product Interface Table has been initialized but it could not find an IUCV product entry.
System Action	NETSIR backs out any modifications to the system and terminates abnormally.
User Action	Contact local Entire Net-Work support personnel.

NETS617	NETW DECLARE BUFFER ALREADY DONE
Explanation	MVS: NETSIR has detected that another program has previously done an IUCV declare buffer and NETSIR cannot find the necessary entries in the Cross Product Interface Table to obtain the address of the external buffer.
System Action	NETSIR backs out any modifications to the system and terminates abnormally.
User Action	Contact local Entire Net-Work support personnel.

NETS618	NETW NO FREE SLOTS IN CPIT
Explanation	MVS: The Cross Product Interface Table is full.
System Action	NETSIR backs out any modifications to the system and terminates abnormally.
User Action	Contact local Entire Net-Work support personnel.

NETS619	NETW CROSS PRODUCT SUBSYSTEM NOT DEFINED
Explanation	MVS: NETSIR has detected that the subsystem for the Cross Product Interface Table is not in the SSCVT chain.
System Action	NETSIR backs out any modifications to the system and terminates abnormally.
User Action	Execute NETSIP to define the CPIT subsystem or define the CPIT subsystem before the NETW subsystem.

NETS620	NETW CPIT LENGTH NOT SET IN SSCVT
Explanation	MVS: NETSIR has detected that the Cross Product Interface Table has been initialized but the length was not available in the SSCVT entry.
System Action	NETSIR backs out any modifications to the system and terminates abnormally.
User Action	Contact local Entire Net-Work support personnel.

NETS621	NETW CPIT INCORRECTLY INITIALIZED
Explanation	MVS: NETSIR has detected that the Cross Product Interface Table has been defined but the SSCVT entry is invalid.
System Action	NETSIR backs out any modifications to the system and terminates abnormally.
User Action	Contact local Entire Net-Work support personnel.

NETS622	NETW OPERATING SYSTEM NOT MVS
Explanation	MVS: An attempt was made to execute the MVS version of NETSIR in an environment other than MVS.
System Action	NETSIR terminates abnormally.
User Action	Execute the version of NETSIR which matches your system or upgrade your system to a supported level of MVS.

NETS623	NETW NO DD STATEMENT FOR SIRDUMP FOUND
Explanation	MVS: The SNAP parameter was specified but no DD statement for the file SIRDUMP was found.
System Action	NETSIR terminates abnormally.
User Action	Supply a DD statement for SIRDUMP in the JCL.

NETS624	NETW NETSIR PRB CANNOT FOUND
Explanation	MVS: The residency mode for NETSIR could not be ascertained because no program request block for NETSIR could be located.
System Action	NETSIR terminates abnormally.
User Action	Contact local Entire Net-Work support personnel.

NETS625	NETW NETSIR RMODE NOT 24
Explanation	MVS: In an MVS/XA or MVS/ESA environment NETSIR was link edited to run with residency mode ANY.
System Action	NETSIR terminates abnormally.
User Action	Check the residency mode of NETSIR and relink with RMODE 24.

NETS626	NETW NETSIR TERMINATED DUE TO OPERATOR REQUEST
Explanation	MVS: The operator requested NETSIR to abort when prompted to enter parameter input.
System Action	NETSIR terminates abnormally.
User Action	Check the reason for the operator input.

NETS627	NETW ACRONYM CHECK FAILURE FOR PROGRAM - NETSVC
Explanation	MVS: NETSIR encountered an incorrect version NETSVC.
System Action	NETSIR backs out any modifications to the system and terminates abnormally.
User Action	Verify that the correct version of NETSVC is in load library.

NETS628	NETW SVCUPDTE MACRO FAILURE
Explanation	MVS: NETSIR could not modify the MVS SVCTABLE to suit the Entire Net-Work SVC.
System Action	NETSIR backs out any modifications to the system and terminates abnormally.
User Action	Contact local Entire Net-Work support personnel.

NETS629	NETW MVS NOT RUNNING UNDER VM
Explanation	MVS: The MVS system NETSIR is not running under z/VM.
System Action	NETSIR terminates abnormally.
User Action	Chose another access method suited to physical environments such as VTAM or Channel-to-Channel.

NETS630	NETW EXTERNAL NEW PSW NOT REPLACED IN THE RESTART FLIH
Explanation	MVS: NETSIR could not install the IUCV support module in the MVS restart routine.
System Action	NETSIR continues processing.
User Action	Contact local Entire Net-Work support personnel. IUCV communication will be lost if a system restart is performed.

NETS640	NETW NO EXTERNAL INTERRUPT ROUTINE FOUND FOR REPLACE PARAMETER
Explanation	MVS: The REPLACE parameter was specified for the FLIH but the IUCV support module was not active.
System Action	NETSIR backs out any modifications to the system and terminates abnormally.
User Action	Execute NETSIR without the REPLACE parameter.

NETS641	NETW EXTERNAL INTERRUPT ROUTINE SUCCESSFULLY REPLACED
Explanation	MVS: The REPLACE parameter was specified for the FLIH. The IUCV support module was replaced.
System Action	NETSIR continues processing.
User Action	None required. This message is informational only.

NETS642	NETW SNAP PROCESSING COMPLETED
Explanation	MVS: The SNAP parameter was specified. The Entire Net-Work data areas have been put out to the SIRDUMP file.
System Action	NETSIR continues processing.
User Action	None required. This message is informational only.

NETS643	NETW THE EXTERNAL INTERRUPT ROUTINE WAS LINKED WITH RMODE=ANY
Explanation	MVS: In an MVS/XA or MVS/ESA environment NETFLIH was link edited to run with residency mode ANY.
System Action	NETSIR backs out any modifications to the system and terminates abnormally.
User Action	Check the residency mode of NETFLIH and relink with RMODE 24.

NETS644	NETW THE EXTERNAL INTERRUPT ROUTINE WAS LOADED INTO PROTECTED STORAGE
Explanation	MVS: In an MVS/XA or MVS/ESA environment the fixed LPA was page protected.
System Action	NETSIR backs out any modifications to the system and terminates abnormally.
User Action	Specify the NOPROT option in the fix list in IAESYSxx and IPL the MVS system.

NETS650	NETW Entire Net-Work COMMON AREA FOR VC XXX INITIALIZED
Explanation	MVS: The Entire Net-Work environment has been successfully initialized.
System Action	NETSIR terminates normally.
User Action	None required. This message is informational only.

SEARCH INDEX CONTENTS | PDF PAGE PDF BOOKS | HOME UP PREV NEXT