This section describes the Adabas System Coordinator response code 101 and its subcodes, which are returned in the rightmost two bytes of the Additions 2 field of the Adabas control block.
Subcode 21 | Subcode 22 | Subcode 23 | Subcode 24 | Subcode 25 | Subcode 26 | Subcode 28 | Subcode 29 | Subcode 30 | Subcode 31 | Subcode 32 | Subcode 33 | Subcode 34 | Subcode 35 | Subcode 36 | Subcode 37 | Subcode 38 | Subcode 39 | Subcode 40 | Subcode 41 | Subcode 42 | Subcode 43 | Subcode 44 | Subcode 45 | Subcode 46 | Subcode 47 | Subcode 49 | Subcode 50 | Subcode 52 | Subcode 53 | Subcode 54 | Subcode 55 | Subcode 56 | Subcode 57| Subcode 21 | UAB index: Find error |
| Explanation |
Internal error. |
| Action |
Contact Software AG Support. |
| Subcode 22 | UAB index: Add error |
| Explanation |
Internal error. |
| Action |
Contact Software AG Support. |
| Subcode 23 | UAB chain: Add error |
| Explanation |
Internal error. |
| Action |
Contact Software AG Support. |
| Subcode 24 | CAB: Memory shortage |
| Explanation |
Insufficient memory available for CAB. |
| Action |
Increase the job region size or the system ECSA size. |
| Subcode 25 | CAB: Allocation failed |
| Explanation |
Insufficient memory available for CAB. |
| Action |
Increase the job region size or the system ECSA size. |
| Subcode 26 | UAB: Unattached task chain |
| Explanation |
Internal error. |
| Action |
Contact Software AG Support. |
| Subcode 28 | XHB: Allocation failed |
| Explanation |
Insufficient memory available for XHB. |
| Action |
Increase the job region size or the system ECSA size. |
| Subcode 29 | CAS: No value buffer for V1 |
| Explanation |
Internal error. |
| Action |
Contact Software AG Support. |
| Subcode 30 | CAS: Illegal V1 function code |
| Explanation |
Internal error. |
| Action |
Contact Software AG Support. |
| Subcode 31 | CAS: JOB CIB allocation failed |
| Explanation |
Insufficient memory for CIB allocation. |
| Action |
Increase the job region size or the system ECSA size. |
| Subcode 32 | CAS: Record buffer too small |
| Explanation |
Internal error. |
| Action |
Contact Software AG Support. |
| Subcode 33 | CAS: No record buffer for V1 |
| Explanation |
Internal error. |
| Action |
Contact Software AG Support. |
| Subcode 34 | CAS: Value buffer format error |
| Explanation |
Internal error. |
| Action |
Contact Software AG Support. |
| Subcode 35 | CAS: Memory pool allocation error |
| Explanation |
Insufficient memory available for the memory pool allocation. |
| Action |
Increase the job region size or the system ECSA size. |
| Subcode 36 | CAS: JOB CIB cannot be found |
| Explanation |
Internal error. |
| Action |
Contact Software AG Support. |
| Subcode 37 | CAS: Memory pool function error |
| Explanation |
Internal error. |
| Action |
Contact Software AG Support. |
| Subcode 38 | CAS: Invalid pool function |
| Explanation |
Internal error. |
| Action |
Contact Software AG Support. |
| Subcode 39 | UAB: CAS V1 processor not loaded |
| Explanation |
Internal error. |
| Action |
Contact Software AG Support. |
| Subcode 40 | UAB: CAS VCON list not loaded |
| Explanation |
Internal error. |
| Action |
Contact Software AG Support. |
| Subcode 41 | UAB: Bad ACBRSP from CAS UABREG |
| Explanation |
Internal error. |
| Action |
Contact Software AG Support. |
| Subcode 42 | UAB: Bad ACBRSP from CAS UABUREG |
| Explanation |
Internal error. |
| Action |
Contact Software AG Support. |
| Subcode 43 | Initialization Error |
| Explanation |
An error occurred during job initialization. |
| Action |
Ensure that correct job parameters were defined. If problem persists, contact Software AG Support. |
| Subcode 44 | UAB: CAS UAB chain header error |
| Explanation |
Internal error. |
| Action |
Contact Software AG Support. |
| Subcode 45 | UAB: CAS dummy UAB allocation error |
| Explanation |
Internal error. |
| Action |
Contact Software AG Support. |
| Subcode 46 | CAS: No group header record |
| Explanation |
Internal error. |
| Action |
Contact Software AG Support. |
| Subcode 47 | PLX: Coupling facility caching error |
| Explanation |
Internal error. |
| Action |
Contact Software AG Support. |
| Subcode 49 | DES: Illegal distributed event services call |
| Explanation |
Internal error. |
| Action |
Contact Software AG Support. |
| Subcode 50 | SVC: Illegal Product ID |
| Explanation |
Internal error. |
| Action |
Contact Software AG Support. |
| Subcode 52 | PLX: User move error |
| Explanation |
Internal error. |
| Action |
Contact Software AG Support. |
| Subcode 53 | CAS: The job is not using SYSCO |
| Explanation |
Internal error. |
| Action |
Contact Software AG Support. |
| Subcode 54 | SSM: Invalid session monitoring request |
| Explanation |
Internal error. |
| Action |
Contact Software AG Support. |
| Subcode 55 | CAS: Cluster unpack error |
| Explanation |
Internal error. |
| Action |
Contact Software AG Support. |
| Subcode 56 | CAS: Pool GET error |
| Explanation |
Internal error. |
| Action |
Contact Software AG Support. |
| Subcode 57 | CAS: GETMAIN error |
| Explanation |
Internal error. |
| Action |
Contact Software AG Support. |
