Only the NETSIP/NETSIR messages relevant to the valid operating systems are presented in this section.
NETS500 | NETS501 | NETS502 | NETS503 | NETS504 | NETS505 | NETS507 | NETS508 | NETS509 | NETS510 | NETS511 | NETS512 | NETS513 | NETS514 | NETS515 | NETS516 | NETS517 | NETS518 | NETS519 | NETS520 | NETS521 | NETS522 | NETS523 | NETS524 | NETS525 | NETS526 | NETS527 | NETS528 | NETS529 | NETS530 | NETS531 | NETS532 | NETS533 | NETS534 | NETS535 | NETS536 | NETS537 | NETS538 | NETS539 | NETS598 | NETS599 | NETS600 | NETS601 | NETS602 | NETS603 | NETS604 | NETS605 | NETS606 | NETS607 | NETS608 | NETS609 | NETS611 | NETS613 | NETS614 | NETS618 | NETS619 | NETS620 | NETS621 | NETS622 | NETS623 | NETS624 | NETS625 | NETS626 | NETS627 | NETS628 | NETS629 | NETS642 | NETS643 | NETS644 | NETS650| NETS500 | ENTIRE NET-WORK 5 INSTALLATION PROGRAM NETSIP (yyyy-mm-dd, SM=sm, ZAP=zap) OPERATING SYSTEM => opsys |
| Explanation |
NETSIP has started. The system maintenance and ZAP levels are displayed and the given operating system environment (OS/390 or z/OS). |
| System Action: |
NETSIP continues execution. |
| User Action: |
This message is for information only. |
| NETS501 | ERROR(S) DETECTED IN EXTRACT PROCESSING: I=> parm-string |
| Explanation |
The parameter extraction process encountered a string that could not be parsed. |
| System Action: |
The parameter string in error is displayed with the error string underscored. NETSIP terminates abnormally with a dump. |
| User Action: |
Correct the parameter string and rerun the job. |
| NETS502 | ERROR(S) DETECTED IN VALIDATE PROCESSING: |
| Explanation |
The parameter validation process encountered an invalid parameter value. |
| System Action: |
This message is followed by one of the messages NETS503 through NETS514 which supplies further information. NETSIP terminates abnormally with a dump. |
| User Action: |
Correct the parameter value and rerun the job. |
| NETS503 | KEYWORD=CONSID, VALUE=consid |
| Explanation |
The value "consid" is invalid for the |
| System Action: |
This message is preceded by the message NETS502. NETSIP terminates abnormally with a dump. |
| User Action: |
Correct the |
| NETS504 | KEYWORD=CSTORAGE, VALUE=cstorage |
| Explanation |
The value "cstorage" is invalid for the |
| System Action: |
This message is preceded by the message NETS502. NETSIP terminates abnormally with a dump. |
| User Action: |
Correct the |
| NETS505 | KEYWORD=CSUBSYS, VALUE=csubsys |
| Explanation |
The value "csubsys" is invalid for the |
| System Action: |
This message is preceded by the message NETS502. NETSIP terminates abnormally with a dump. |
| User Action: |
Correct the |
| NETS507 | KEYWORD=LEAVE, VALUE=leave |
| Explanation |
The value "leave" is invalid for the |
| System Action: |
This message is preceded by the message NETS502. NETSIP terminates abnormally with a dump. |
| User Action: |
Correct the |
| NETS508 | KEYWORD=NSUBSYS, VALUE=nsubsys |
| Explanation |
The value "nsubsys" is invalid for the |
| System Action: |
This message is preceded by the message NETS502. NETSIP terminates abnormally with a dump. |
| User Action: |
Correct the |
| NETS509 | KEYWORD=PSTORAGE, VALUE=pstorage |
| Explanation |
The value "pstorage" is invalid for the |
| System Action: |
This message is preceded by the message NETS502. NETSIP terminates abnormally with a dump. |
| User Action: |
Correct the |
| NETS510 | KEYWORD=QSIZE, VALUE=qsize |
| Explanation |
The value "qsize" is invalid for the |
| System Action: |
This message is preceded by the message NETS502. NETSIP terminates abnormally with a dump. |
| User Action: |
Correct the |
| NETS511 | KEYWORD=REPLACE, VALUE=replace |
| Explanation |
The value "replace" is invalid for the |
| System Action: |
This message is preceded by the message NETS502. NETSIP terminates abnormally with a dump. |
| User Action: |
Correct the |
| NETS512 | KEYWORD=SNAP, VALUE=snap |
| Explanation |
The value "snap" is invalid for the |
| System Action: |
This message is preceded by the message NETS502. NETSIP terminates abnormally with a dump. |
| User Action: |
Correct the |
| NETS513 | KEYWORD=SVCNR, VALUE=svcnr |
| Explanation |
The value "svcnr" is invalid for the |
| System Action: |
This message is preceded by the message NETS502. NETSIP terminates abnormally with a dump. |
| User Action: |
Correct the |
| NETS514 | KEYWORD=SVCTAB, VALUE=svctab |
| Explanation |
The value "svctab" is invalid for the |
| System Action: |
This message is preceded by the message NETS502. NETSIP terminates abnormally with a dump. |
| User Action: |
Correct the |
| NETS515 | INVALID OPERATING SYSTEM DETECTED - NOT MVS |
| Explanation |
An attempt was made to execute the OS/390 or z/OS version of NETSIP in a different (non OS/390 or z/OS) environment. |
| System Action: |
NETSIP terminates abnormally with a dump. |
| User Action: |
Execute the version of NETSIP that matches your system or upgrade your system to a supported level. |
| NETS516 | EXECUTE PARAMETER LENGTH GREATER THAN MAXIMUM (68) |
| Explanation |
A parameter value longer than 68 bytes was encountered. |
| System Action: |
NETSIP terminates abnormally with a dump. |
| User Action: |
Correct the |
| NETS517 | CATASTROPHIC CONDITION OCCURRED IN EXTRACT PROCESSING |
| Explanation |
An unexpected delimiter value was encountered during parameter parsing. |
| System Action: |
NETSIP terminates abnormally with a dump. |
| User Action: |
Correct the |
| NETS518 | TERMINAL ERROR(S) DETECTED IN PARAMETER PROCESSING |
| Explanation |
A parameter error was encountered. |
| System Action: |
This message is preceded by messages that explain the error in detail. |
| User Action: |
Correct the |
| NETS519 | PROGRAM ADDRESSING MODE INCORRECT (NOT AMODE=31) |
| Explanation |
One or more of the programs NETSIR, NETFLIH, or NETSVC was linked to run with addressing mode 24. |
| System Action: |
NETSIP terminates abnormally with a dump. |
| User Action: |
Check the addressing mode of the programs and relink with AMODE 31. |
| NETS520 | PROGRAM RESIDENCY MODE INCORRECT (NOT RMODE=24) |
| Explanation |
One or more of the programs NETSIR, NETFLIH, or NETSVC was linked to run with residency mode ANY. |
| System Action: |
NETSIP terminates abnormally with a dump. |
| User Action: |
Check the residency mode of the programs and relink with RMODE 24. |
| NETS521 | PROGRAM NOT APF-AUTHORIZED |
| Explanation |
NETSIP was not loaded from an APF-authorized library; an unauthorized library was contained in the STEPLIB concatenation; or NETSIP was not linked with SETCODE AC(1). |
| System Action: |
NETSIP terminates abnormally with a dump. |
| User Action: |
Check the APF status of the load library and if necessary relink NETSIP SETCADE AC(1). |
| NETS522 | OPERATING SYSTEM IS NOT A VIRTUAL MACHINE GUEST |
| Explanation |
The operating system NETSIP is executing on is not running under VM. |
| System Action: |
NETSIP terminates abnormally with a dump. |
| User Action: |
Chose another access method suited to physical environments such as VTAM or channel-to-channel. |
| NETS523 | LOAD FAILURE FOR PROGRAM - pgmname |
| Explanation |
The program pgmname could not be loaded. |
| System Action: |
NETSIP backs out any modifications to the system and terminates with a dump. |
| User Action: |
Check the library definition for the program in the execution JCL. |
| NETS524 | ACRONYM CHECK FAILURE FOR PROGRAM - pgmname |
| Explanation |
NETSIP encountered an incorrect version the program pgmname. |
| System Action: |
NETSIP backs out any modifications to the system and terminates with a dump. |
| User Action: |
Verify that the correct version of this program is in the load library. |
| NETS525 | RECOVERY ENVIRONMENT CREATION FAILURE (ESTAE) |
| Explanation |
NETSIP was unable to establish an error recovery routine. |
| System Action: |
NETSIP backs out any modifications to the system and terminates with a dump. |
| User Action: |
Contact your Software AG technical support representative. |
| NETS526 | CPIT SUBSYSTEM FOR CROSS PRODUCT INTERFACE TABLE ALREADY INSTALLED |
| Explanation |
The cross-product interface table SSCVT is already installed. |
| System Action: |
NETSIP continues processing if the |
| User Action: |
If the |
| NETS527 | CPIT SUBSYSTEM FOR CROSS PRODUCT INTERFACE INSTALLED |
| Explanation |
The cross-product interface table SSCVT has been successfully installed. |
| System Action: |
NETSIP continues processing. |
| User Action: |
This message is for information only. |
| NETS528 | subs SUBSYSTEM INITIALIZATION FAILURE |
| Explanation |
The subsystem subs could not be added to the SSCVT chain. |
| System Action: |
NETSIP backs out any modifications to the system and terminates with a dump. |
| User Action: |
Contact your Software AG technical support representative. |
| NETS529 | subs SUBSYSTEM HAS BEEN REMOVED |
| Explanation |
The subsystem subs was removed from the SSCVT chain during error recovery. |
| System Action: |
NETSIP continues with error recovery. |
| User Action: |
Correct the problem that caused the original error. |
| NETS530 | SVCTABLE UPDATE FAILURE - SVC NUMBER nnn |
| Explanation |
NETSIP could not modify the system SVCTABLE to suit the Entire Net-Work SVC. |
| System Action: |
NETSIP backs out any modifications to the system and terminates with a dump. |
| User Action: |
Contact your Software AG technical support representative. |
| NETS531 | OPEN/BLDL FAILURE - DDNAME=libname |
| Explanation |
NETSIP could not open or build a directory for the library libname. |
| System Action: |
NETSIP backs out any modifications to the system and terminates with a dump. |
| User Action: |
Check the DDNAME in the JCL. |
| NETS532 | GETMAIN FAILURE - S=sbp, L=length(D) |
| Explanation |
NETSIP could not allocate required storage in the specified "length" in the subpool sbp. |
| System Action: |
NETSIP backs out any modifications to the system and terminates with a dump. |
| User Action: |
Verify that the subpool has sufficient storage and that the
|
| NETS533 | FREEMAIN FAILURE - S=sbp, L=length(D), A=address(H) |
| Explanation |
NETSIP could not free allocated storage at location "address" in the specified "length" in the subpool sbp. |
| System Action: |
NETSIP backs out any modifications to the system and terminates with a dump. |
| User Action: |
Contact your Software AG technical support representative. |
| NETS534 | ENTIRE NET-WORK 5 SUBSYSTEM HAS BEEN INSTALLED |
| Explanation |
The Entire Net-Work SSCVT has been successfully installed. |
| System Action: |
NETSIP continues processing. |
| User Action: |
This message is for information only. |
| NETS535 | ENTIRE NET-WORK 5 SUBSYSTEM IS ALREADY INSTALLED |
| Explanation |
An Entire Net-Work SSCVT was encountered and the
|
| System Action: |
NETSIP backs out any modifications to the system and terminates with a dump. |
| User Action: |
Check whether the Entire Net-Work environment has been successfully
installed and specify the |
| NETS536 | ENTIRE NET-WORK 5 SUBSYSTEM HAS BEEN REMOVED |
| Explanation |
An Entire Net-Work SSCVT was removed from the SSCVT chain during error recovery. |
| System Action: |
NETSIP continues with error recovery. |
| User Action: |
Correct the problem that caused the original error. |
| NETS537 | ENTIRE NET-WORK 5 SVC svc HAS BEEN INSTALLED |
| Explanation |
The Entire Net-Work SVC has been successfully installed as SVC number svc. |
| System Action: |
NETSIP continues processing. |
| User Action: |
This message is for information only. |
| NETS538 | ENTIRE NET-WORK 5 SVC HAS BEEN REMOVED FROM THE SYSTEM |
| Explanation |
An Entire Net-Work SVC was removed from the system SVCTABLE during error recovery. |
| System Action: |
NETSIP continues with error recovery. |
| User Action: |
Correct the problem that caused the original error. |
| NETS539 | ENTIRE NET-WORK 5 SVC COULD NOT BE REMOVED FROM THE SYSTEM |
| Explanation |
An Entire Net-Work SVC could not be removed from the system SVCTABLE during error recovery. |
| System Action: |
NETSIP continues with error recovery. |
| User Action: |
Correct the problem that caused the original error and specify the
|
| NETS598 | NETSIP - NETSIR INITIALIZATION FAILED |
| Explanation |
NETSIP encountered errors during execution. |
| System Action: |
NETSIP terminates abnormally with a dump. Other error messages precede this message. |
| User Action: |
Refer to the error message and correct the error. |
| NETS599 | NETSIP - NORMAL TERMINATION |
| Explanation |
The Entire Net-Work environment initialized successfully. |
| System Action: |
NETSIP terminates normally. |
| User Action: |
This message is for information only. |
| NETS600 | NETSIR (yyyy-mm-dd, SM=sm, ZAP=zap) |
| Explanation |
NETSIR started executing. The system maintenance and ZAP levels are displayed. |
| System Action: |
NETSIP continues execution. |
| User Action: |
This message is for information only. |
| NETS601 | NETW ENTIRE NET-WORK 5 INITIALIZATION PARAMETER NOT RECOGNIZED |
| Explanation |
The parameter parsing process has encountered an invalid parameter name. |
| System Action: |
NETSIR terminates abnormally. |
| User Action: |
Correct the parameter value and rerun the job. |
| NETS602 | NETW ENTIRE NET-WORK 5 INITIALIZATION PARAMETER(S) ERROR |
| Explanation |
The parameter validation process has encountered an invalid parameter value. |
| System Action: |
NETSIR terminates abnormally. |
| User Action: |
Correct the parameter value and rerun the job. |
| NETS603 | NETW ENTER ENTIRE NET-WORK COMMON AREA SUBPOOL ('C'=CSA OR 'S'=SQA) ------- OR 'A' TO ABORT ENTIRE NET-WORK 5 INITIALIZATION |
| Explanation |
The value specified for the |
| System Action: |
NETSIR prompts the operator to enter a correct value. |
| User Action: |
Enter the correct value for the parameter or 'A' to terminate NETSIR processing. |
| NETS604 | NETW LEAVE MESSAGE NETS650 OR NETS631 THRU NETS649 (N OR Y) |
| Explanation |
The value specified for the |
| System Action: |
NETSIR prompts the operator to enter a correct value. |
| User Action: |
Enter the correct value. |
| NETS605 | NETW ENTER ENTIRE NET-WORK 5 INTERRUPT QUEUE SIZE (0-9999) OR 'A' TO ABORT ENTIRE NET-WORK 5 INITIALIZATION |
| Explanation |
The value specified for the |
| System Action: |
NETSIR prompts the operator to enter a correct value. |
| User Action: |
Enter the correct value for the parameter or 'A' to terminate NETSIR processing. |
| NETS606 | NETW ENTER ENTIRE NET-WORK 5 SVC NUMBER (200-255) OR 'A' TO ABORT ENTIRE NET-WORK 5 INITIALIZATION |
| Explanation |
The value specified for the |
| System Action: |
NETSIR prompts the operator to enter a correct value. |
| User Action: |
Enter the correct value for the parameter or 'A' to terminate NETSIR processing. |
| NETS607 | NETW PROMPT OPERATOR TO UPDATE SVC TABLE ENTRY (N OR P) |
| Explanation |
The value specified for the |
| System Action: |
NETSIR prompts the operator to enter a correct value. |
| User Action: |
Enter the correct value. |
| NETS607 | NETW ENTIRE NET-WORK 5 SVC svc TABLE ENTRY AT svctaddr INVALID: IS value1 value2 SHOULD BE value3 value4 |
| Explanation |
The value 'P' was specified for the |
| System Action: |
This message is followed by message NETS608. |
| User Action: |
This message is for information only. |
| NETS608 | NETW SHOULD SVC TABLE ENTRY BE CHANGED ('Y') OR SHOULD ENTIRE NET-WORK 5 INITIALIZATION BE ABORTED ('N')? |
| Explanation |
The value 'P' was specified for the |
| System Action: |
NETSIR prompts the operator to enter a correct value. This message is preceded by message NETS607. |
| User Action: |
Enter the correct value. |
| NETS609 | NETW SVC svc TABLE ENTRY CHANGED WITHOUT PROMPTING OPERATOR |
| Explanation |
The value 'N' was specified for the |
| System Action: |
NETSIR modifies the SVCTABLE and continues processing. |
| User Action: |
This message is for information only. |
| NETS611 | NETW UNABLE TO ACQUIRE COMMON STORAGE VIA GETMAIN |
| Explanation |
The program NETSIR was unable to acquire common storage in the page-fixed CSA or SQA for the necessary control blocks. |
| System Action: |
NETSIR backs out any modifications to the system and terminates abnormally. |
| User Action: |
Specify the other page-fixed storage area or increase the size of the fixed CSA or SQA and IPL the operating system. |
| NETS613 | NETW UNABLE TO ACQUIRE INTQ STORAGE VIA GETMAIN |
| Explanation |
The program NETSIR was unable to acquire storage in the page-fixed CSA or SQA for either the Entire Net-Work interrupt queue or the path table. |
| System Action: |
NETSIR backs out any modifications to the system and terminates abnormally. |
| User Action: |
Specify the other page-fixed storage area or increase the size of the fixed CSA or SQA and IPL the operating system. |
| NETS614 | NETW ESTAE EXIT HAS BEEN ENTERED IN NETSIR |
| Explanation |
The NETSIR ABEND handler was entered while running this utility. |
| System Action: |
NETSIR backs out any modifications to the system and terminates abnormally. If the SIRDUMP file is available, a dump of the SDWA will be printed. |
| User Action: |
Contact your Software AG technical support representative. |
| NETS618 | NETW NO FREE SLOTS IN CPIT |
| Explanation |
The cross-product interface table is full. |
| System Action: |
NETSIR backs out any modifications to the system and terminates abnormally. |
| User Action: |
Contact your Software AG technical support representative. |
| NETS619 | NETW CROSS PRODUCT SUBSYSTEM NOT DEFINED |
| Explanation |
NETSIR detected that the subsystem for the cross-product interface table is not in the SSCVT chain. |
| System Action: |
NETSIR backs out any modifications to the system and terminates abnormally. |
| User Action: |
Execute NETSIP to define the CPIT subsystem or define the CPIT subsystem before the NETW subsystem. |
| NETS620 | NETW CPIT LENGTH NOT SET IN SSCVT |
| Explanation |
NETSIR detected that the cross-product interface table was initialized but the length was not available in the SSCVT entry. |
| System Action: |
NETSIR backs out any modifications to the system and terminates abnormally. |
| User Action: |
Contact your Software AG technical support representative. |
| NETS621 | NETW CPIT INCORRECTLY INITIALIZED |
| Explanation |
NETSIR detected that the cross-product interface table is defined but the SSCVT entry is invalid. |
| System Action: |
NETSIR backs out any modifications to the system and terminates abnormally. |
| User Action: |
Contact your Software AG technical support representative. |
| NETS622 | NETW OPERATING SYSTEM NOT OS/390 OR Z/OS |
| Explanation |
An attempt was made to execute the OS/390 or z/OS version of NETSIR in an environment other than OS/390 or z/OS. |
| System Action: |
NETSIR terminates abnormally. |
| User Action: |
Execute the version of NETSIR that matches your system or upgrade your system to a supported level of the operating system. |
| NETS623 | NETW NO DD STATEMENT FOR SIRDUMP FOUND |
| Explanation |
The |
| System Action: |
NETSIR terminates abnormally. |
| User Action: |
Supply a DD statement for SIRDUMP in the JCL. |
| NETS624 | NETW NETSIR PRB CANNOT FOUND |
| Explanation |
The residency mode for NETSIR could not be determined because no program request block for NETSIR could be located. |
| System Action: |
NETSIR terminates abnormally. |
| User Action: |
Contact your Software AG technical support representative. |
| NETS625 | NETW NETSIR RMODE NOT 24 |
| Explanation |
NETSIR was linked to run with residency mode ANY. |
| System Action: |
NETSIR terminates abnormally. |
| User Action: |
Check the residency mode of NETSIR and relink with RMODE 24. |
| NETS626 | NETW NETSIR TERMINATED DUE TO OPERATOR REQUEST |
| Explanation |
The operator requested NETSIR to abort when prompted to enter parameter input. |
| System Action: |
NETSIR terminates abnormally. |
| User Action: |
Check the reason for the operator input. |
| NETS627 | NETW ACRONYM CHECK FAILURE FOR PROGRAM - NETSVC |
| Explanation |
NETSIR encountered an incorrect version NETSVC. |
| System Action: |
NETSIR backs out any modifications to the system and terminates abnormally. |
| User Action: |
Verify that the correct version of NETSVC is in load library |
| NETS628 | NETW SVCUPDTE MACRO FAILURE |
| Explanation |
NETSIR could not modify the system SVCTABLE to suit the Entire Net-Work SVC. |
| System Action: |
NETSIR backs out any modifications to the system and terminates abnormally. |
| User Action: |
Contact your Software AG technical support representative. |
| NETS629 | NETW MVS NOT RUNNING UNDER VM |
| Explanation |
The OS/390 or z/OS system NETSIR is not running under VM. |
| System Action: |
NETSIR terminates abnormally. |
| User Action: |
Choose an appropriate access method. |
| NETS642 | NETW SNAP PROCESSING COMPLETED |
| Explanation |
The |
| System Action: |
NETSIR continues processing. |
| User Action: |
This message is for information only. |
| NETS643 | NETW THE EXTERNAL INTERRUPT ROUTINE WAS LINKED WITH RMODE=ANY |
| Explanation |
NETFLIH was linked to run with residency mode ANY. |
| System Action: |
NETSIR backs out any modifications to the system and terminates abnormally. |
| User Action: |
Check the residency mode of NETFLIH and relink with RMODE 24. |
| NETS644 | NETW THE EXTERNAL INTERRUPT ROUTINE WAS LOADED INTO PROTECTED STORAGE |
| Explanation |
The fixed LPA was page-protected. |
| System Action: |
NETSIR backs out any modifications to the system and terminates abnormally. |
| User Action: |
Specify the NOPROT option in the fix list in IAESYSxx and IPL the operating system. |
| NETS650 | NETW ENTIRE NET-WORK COMMON AREA FOR VC xxx INITIALIZED |
| Explanation |
The Entire Net-Work environment initialized successfully. |
| System Action: |
NETSIR terminates normally. |
| User Action: |
This message is for information only. |
