Note:
Adabas version 6 RLOGs cannot be listed; only version 7 and above
RLOGs are supported.
The ADARAI LIST function is used to view the RLOG contents in table form:
generations are listed in numerical order;
RLOG block ranges are listed for each generation; and
the stop/start dates and times covered by each generation are listed.
The following information is provided for each entry on the RLOG including utility executions and nucleus session start and session stop entries:
name of the event for which the RLOG entry was written;
date and time the information was written to the RLOG;
PLOG number associated with the event (if any);
PLOG block containing an associated checkpoint (if any);
parameters specified for the logged event to the DD/CARD and DD/KARTE statements; and
details of any files written or read during the logged event.
In a nucleus cluster environment, the PLOG datasets are also listed on nucleus session start entries. The cluster nucleus ID (NUCID) is also listed.
*** 2001-08-21 11:37:08 NUCLEUS PLOG NUMBER=4
*** START NUCLEUS SESSION NUCID 40002
SYNC PLOG BLOCK NUMBER = 1
ACTIVE PLOG DATA SET NAMES: EXAMPLE.DBddddd.PLOGR21
EXAMPLE.DBddddd.PLOGR22
This document covers the following topics:
On BS2000 systems, LIST also provides the following information:
file or file generation group (FGG) characteristics and physical location (tape, disk, etc.);
existence and condition of each dataset (written and erased; overwritten; written as a temporary file) needed by the ADARAI RECOVER function; and
error or warning message for incompatible coded file ID (CFID) comparison.
Since nonmatching coded file IDs (CFIDs) are a reliable indication of overwritten datasets in BS2000, LIST compares CFIDs to determine whether any datasets have been overwritten. For lost or overwritten datasets, LIST provides an error or warning indication for the following conditions:
An "ERROR" is indicated when the dataset was written to
disk, and was then erased;
disk, and then was overwritten (CFIDs do not match). Both the original and the catalog entry are reported;
a temporary disk dataset.
A "WARNING" is indicated when the dataset was written to
tape, and the catalog entry has been erased;
tape, and then was overwritten (CFIDs do not match). Both the original and the catalog entry are reported;
a temporary tape dataset.
The section Output Examples provides examples of the operating-system-dependent results provided by the LIST function.
GENS determines whether generation information is listed. GENS=NO lists only the RLOG control information. GENS=YES (the default) lists generation information also.
RELGEN specifies the relative generation number (or range of generation numbers) to be listed. The current generation is always coupled with relative generation "0" (zero). The last completed generation is coupled with relative generation 1; "two generations ago", the generation before the last completed generation, is specified as relative generation "2".
Example:
To list the generations ranging from three generations ago to the last complete generation (inclusive), specify RELGEN=3-1.
If the first generation number specified is lower than the second generation number, ADRAI reduces the second generation number to match the first.
Example:
If you specify RELGEN=2-3, ADARAI changes it to RELGEN=2-2.
If RELGEN is not specified, all generations are printed.
The specified generation must currently be in the RLOG. Note, however, that instead of a relative number, each listed generation has an ascending order number, beginning with 1 (the first generation following the start of RLOG operation).
Example:
RELGEN=0 is equivalent to generation number 690; RELGEN=3-2 is equivalent to the generation numbers 687 and 688.
I GEN- I BLOCK I DATE /TIME I I NUMBER I FROM TO I FROM TO I I--------I-----------------I--------------------------------------------I I 690 I 715 715 I 2001-08-20 02:07:13 2001-08-20 08:51:19 I I 689 I 714 714 I 2001-08-17 18:24:49 2001-08-20 02:03:21 I I 688 I 713 713 I 2001-08-16 18:24:26 2001-08-17 16:48:16 I I 687 I 712 712 I 2001-08-15 18:29:09 2001-08-16 12:54:28 I I 686 I 711 711 I 2001-08-14 18:24:30 2001-08-15 17:45:44 I I 685 I 710 710 I 2001-08-13 18:32:07 2001-08-14 15:46:25 I I 684 I 709 709 I 2001-08-13 02:07:15 2001-08-13 18:00:18 I I 683 I 708 708 I 2001-08-10 18:25:59 2001-08-13 02:03:23 I I 682 I 707 707 I 2001-08-09 18:36:39 2001-08-10 10:24:14 I
RLOGDEV specifies the device type containing the RLOG file. If the RLOG file is located on the device type specified by the ADARUN DEVICE parameter (the default device type), you do not need to specify RLOGDEV.
ADARAI LIST
This example lists all generations in the RLOG.
ADARAI LIST RELGEN=15-1
LIST displays the last 15 generations (if they are available in the RLOG), not including the current generation (0).
The following example shows LIST output for a single BS2000 disk dataset:
LINK=DDSAVE1 PATHNAME=:A:$GEB.RAI.vv.SAVE.012 SIZE=6387 SEC-ALLO=96 LPP=6336 FCBTYPE=SAM RECFORM=V BLKSIZE=(STD,16) RECSIZE=32748 BLKCNTRL=PAMKEY VSN/DEV PUBA00/D3480 /AC PUBA01/D3480 /AC VSN/DEV PUBA02/D3480 /AC
The following example shows LIST output for a BS2000 file-generation group (FGG):
FGG INDEX BASE=10 CURRENT=10 FIRST=1 MAX=255 DISP=DEL LINK=DDSAVE1 PATHNAME=:A:$GEB.RAI.vv.SAVE.TAPE.01(*0010) TAPE DEVICE=TAPE=C1 (B5) FSEQ=1 BLKCOUNT=4000 FCBTYPE=SAM RECFORM=V BLKSIZE=32760 RECSIZE=32756 BLKCNTRL=NO VOLUMES GEBR11 GEBR12 GEBR13 GEBR17 GEBR19
The following examples are of ADARAI LIST error/warning output. The first is for a lost disk dataset, and the second for an overwritten tape dataset:
LINK=DDSAVE1 DISC DATASET NOT PRESENT - E R R O R ORIGINAL CATALOG ENTRY: LINK=DDSAVE1 PATHNAME=:A:$GEB.RAI.vv.SAVE.012 SIZE=6387 SEC-ALLO=96 LPP=6336 FCBTYPE=SAM RECFORM=V BLKSIZE=(STD,16) RECSIZE=32748 BLKCNTRL=PAMKEY VSN/DEV PUBA00/D3480 /AC PUBA01/D3480 /AC VSN/DEV PUBA02/D3480 /AC LINK=DDSAVE1 CFID MISMATCH - W A R N I N G ORIGINAL 379949EE NOW: 379972F0 ORIGINAL CATALOG ENTRY: LINK=DDSAVE1 PATHNAME=:A:$GEB.RAI.vv.SAVE.012 TAPE DEVICE=TAPE=C1 (B5) FSEQ=1 BLKCOUNT=4000 FCBTYPE=SAM RECFORM=V BLKSIZE=32760 RECSIZE=32756 BLKCNTRL=NO CREATION DATE yyyy-mm-dd 11:44:35 VOLUMES GEBR11 GEBR12 GEBR13 GEBR17 GEBR19 ACTUAL CATALOG ENTRY: LINK=DDSAVE1 PATHNAME=:A:$GEB.RAI.vv.SAVE.012 TAPE DEVICE=TAPE=C1 (B5) FSEQ=1 BLKCOUNT=3900 FCBTYPE=SAM RECFORM=V BLKSIZE=32760 RECSIZE=32756 BLKCNTRL=NO CREATION DATE yyyy-mm-dd 12:34:56 VOLUMES GEBR23 GEBR65 GEBR66 GEBR67 GEBR68
A D A R A I Vv.v SMv DBID = 00203 STARTED yyyy-mm-dd hh:mm:ss
PARAMETERS:
-----------
ADARAI LIST RELGEN=0
RECOVERY LOG FILE FOR DATABASE 203
START RABN FOR LOG DATA AREA IS 21
HIGHEST LOG AREA RABN IS 633
CURRENT VALUE FOR ROTATING RABN IS 23
I GEN- I I BLOCK I DATE /TIME I
I NUMBER I S I FROM TO I FROM TO I
I--------I---I-----------------I--------------------------------------------I
I 3 I N I 23 23 I yyyy-01-13 16:06:28 yyyy-01-13 16:11:35 I
I 2 I N I 22 22 I yyyy-01-09 16:07:10 yyyy-01-13 16:04:13 I
I 1 I N I 21 21 I yyyy-01-09 16:04:41 yyyy-01-09 16:06:16 I
I 0 I R I 20 20 I yyyy-01-09 16:04:07 yyyy-01-09 16:04:30 I
I--------I---I-----------------I--------------------------------------------I
*** yyyy-01-13 16:06:28
*** SAVE DATABASE OFFLINE
DELTA SAVE ID IS AS FOLLOWS:
FULL SAVE...............2
LOW DELTA SAVE NUMBER...0
HIGH DELTA SAVE NUMBER..0
DATE WRITTEN............yyyy-01-13
TIME WRITTEN............16:12:03
FILES = 1,2,3,19
ADARUN DBID=203,SVC=249,DEVICE=3390,PLOGRQ=YES
ADARUN NCLOG=2,CLOGDEV=3390,CLOGSIZE=150
ADARUN NPLOG=2,PLOGSIZE=1350
ADARUN PLOGDEV=3390
ADARUN DSF=YES
ADARUN UEX2=USEREX2M
ADARUN PROG=ADASAV
ADASAV SAVE
//DDSAVE1 DD DSN=EXAMPLE.ADASAV.FULL.G0058V00,
// UNIT=3390,SPACE=(TRK,(5,5)),DISP=NEW,
// DCB=(RECFM=VB,BLKSIZE=27998,LRECL=27994),
// VOL=SER=(SMS018)
DDSAVE1 VOLSER=SMS018 FROM BLOCK=1 (ASSO) TO BLOCK =1598 VOLUME IS ASSOCIATED WITH PLOG NO. 6
DDSAVE1 VOLSER=SMS018 FROM BLOCK=1 (DATA)
TO BLOCK =750
VOLUME IS ASSOCIATED WITH PLOG NO. 6
*** yyyy-01-13 16:07:09 NUCLEUS PLOG NUMBER=7
*** START NUCLEUS SESSION [NUCID=nnnnn]
SYNC PLOG BLOCK NUMBER = 5
[ACTIVE PLOG DATASET NAMES: EXAMPLE.DBddddd.PLOGR21
EXAMPLE.DBddddd.PLOGR22]
ADARUN DBID=203,SVC=249,DEVICE=3390,PLOGRQ=YES
ADARUN NCLOG=2,CLOGSIZE=150,CLOGDEV=3390
ADARUN NPLOG=2,PLOGSIZE=1350
ADARUN PLOGDEV=3390
ADARUN DSF=YES
ADARUN UEX2=USEREX2M
ADARUN PROG=ADANUC
ADARUN MODE=MULTI
ADARUN LOCAL=YES
ADARUN SPT=NO
ADARUN LWP=480000
ADARUN LP=200
ADARUN TT=1800
ADARUN TNAE=1800
ADARUN LBP=80000
ADARUN NH=500
ADARUN LFP=60000
ADARUN LU=65525
ADARUN NAB=45
ADARUN LQ=12000
ADARUN LI=20000
ADARUN NT=10
ADARUN NC=300
ADARUN NU=300
ADARUN LS=20000
ADARUN TNAX=1800
ADARUN CT=300
ADARUN OPENRQ=NO
ADARUN LOGGING=NO
ADARUN LOGCB=NO
ADARUN LOGSB=NO
ADARUN LOGFB=NO
ADARUN IGNDIB=NO
ADARUN FORCE=NO
*** yyyy-01-13 16:07:18 NUCLEUS PLOG NUMBER=7
*** END NUCLEUS SESSION
HIGHEST PLOG BLOCK WRITTEN = 7
*** yyyy-01-13 16:07:22
*** COPY MULTIPLE PROTECTION LOG DATASET FOR PLOG 7
ADARUN DBID=203,SVC=249,DEVICE=3390,PLOGRQ=YES
ADARUN NCLOG=2,CLOGSIZE=150,CLOGDEV=3390
ADARUN NPLOG=2,PLOGSIZE=1350
ADARUN PLOGDEV=3390
ADARUN DSF=YES
ADARUN UEX2=USEREX2M
ADARUN PROG=ADARES,MODE=MULTI
ADARES PLCOPY OPENOUT
ADARES DSIMSIZE=5
//DDSIAUS1 DD DSN=EXAMPLE.PLOG.G0243V00,UNIT=3390,
// SPACE=(TRK,(10,1)),DISP=NEW,DCB=(RECFM=VB,
// BLKSIZE=27998,LRECL=27994),
// VOL=SER=(SMS018)
DDSIAUS1 VOLSER=SMS018 FROM BLOCK=1
TO BLOCK =7
FROM DATE =yyyy-01-13 17:07:09
TO DATE =yyyy-01-13 17:07:18
VOLUME IS ASSOCIATED WITH PLOG NO. 7
*** yyyy-01-13 16:07:39 NUCLEUS PLOG NUMBER=8
*** START NUCLEUS SESSION [NUCID=nnnnn]
SYNC PLOG BLOCK NUMBER = 3
[ACTIVE PLOG DATASET NAMES: EXAMPLE.DBddddd.PLOGR21
EXAMPLE.DBddddd.PLOGR22]
ADARUN DBID=203,SVC=249,DEVICE=3390,PLOGRQ=YES
ADARUN NCLOG=2,CLOGSIZE=150,CLOGDEV=3390
ADARUN NPLOG=2,PLOGSIZE=1350
ADARUN PLOGDEV=3390
ADARUN DSF=YES
ADARUN UEX2=USEREX2M
ADARUN PROG=ADANUC
ADARUN MODE=MULTI
ADARUN LOCAL=YES
ADARUN SPT=NO
ADARUN LWP=480000
ADARUN LP=200
ADARUN TT=1800
ADARUN TNAE=1800
ADARUN LBP=80000
ADARUN NH=500
ADARUN LFP=60000
ADARUN LU=65525
ADARUN NAB=45
ADARUN LQ=12000
ADARUN LI=20000
ADARUN NT=10
ADARUN NC=300
ADARUN NU=300
ADARUN LS=20000
ADARUN TNAX=1800
ADARUN CT=300
ADARUN OPENRQ=NO
ADARUN LOGGING=NO
ADARUN LOGCB=NO
ADARUN LOGSB=NO
ADARUN LOGFB=NO
ADARUN IGNDIB=NO
ADARUN FORCE=NO
*** yyyy-01-13 16:09:16 NUCLEUS CHECKPOINT
ENCOUNTERED
CHECKPOINT IS ON PLOG NUMBER 8 BLOCK NUMBER 4
SYNS-CHECKPOINT IS 'DELETE FILE'
FILES = 1
*** yyyy-01-13 16:09:16 NUCLEUS CHECKPOINT ENCOUNTERED
CHECKPOINT IS ON PLOG NUMBER 8 BLOCK NUMBER 5
SYNS-CHECKPOINT IS 'DELETE FILE'
FILES = 2
*** yyyy-01-13 16:10:27 NUCLEUS PLOG NUMBER=8
*** ADABAS UTILITY RUN
SYNP-CHECKPOINT ID IS 'ADALOD - LOAD'
SYNP-CHECKPOINT IS FOUND ON PLOG 8 IN BLOCK NO. 6
FILES = 1
ADARUN DBID=203,SVC=249,DEVICE=3390,PLOGRQ=YES
ADARUN NCLOG=2,CLOGSIZE=150,CLOGDEV=3390
ADARUN NPLOG=2,PLOGSIZE=1350
ADARUN PLOGDEV=3390
ADARUN DSF=YES
ADARUN UEX2=USEREX2M
ADARUN PROG=ADALOD,MODE=MULTI
ADALOD LOAD FILE=1
ADALOD NAME='EMPLOYEES'
ADALOD MAXISN=1500,DSSIZE=1
ADALOD TEMPSIZE=15,SORTSIZE=15
//DDEBAND DD
DSN=ADABAS.Vvrs.EMPL,UNIT=3390,DISP=OLD,
// VOL=SER=(ADA001)
*** yyyy-01-13 16:11:21 NUCLEUS PLOG NUMBER=8
*** ADABAS UTILITY RUN
SYNP-CHECKPOINT ID IS 'ADALOD - LOAD'
SYNP-CHECKPOINT IS FOUND ON PLOG 8 IN BLOCK NO. 7
FILES = 2
ADARUN
PROG=ADALOD,MODE=SINGLE,SVC=249,DEVICE=3390,DBID=203
ADALOD LOAD FILE=2
ADALOD NAME='VEHICLES'
ADALOD MAXISN=1000,DSSIZE=1
ADALOD TEMPSIZE=15,SORTSIZE=15
//DDEBAND DD
DSN=ADABAS.Vvrs.VEHI,UNIT=3390,DISP=OLD,
// VOL=SER=(ADA001)
*** yyyy-01-13 16:11:31 NUCLEUS PLOG NUMBER=8
*** END NUCLEUS SESSION
HIGHEST PLOG BLOCK WRITTEN = 9
*** yyyy-01-13 16:11:35
*** COPY MULTIPLE PROTECTION LOG DATASET FOR PLOG 8
ADARUN DBID=203,SVC=249,DEVICE=3390,PLOGRQ=YES
ADARUN NCLOG=2,CLOGSIZE=150,CLOGDEV=3390
ADARUN NPLOG=2,PLOGSIZE=1350
ADARUN PLOGDEV=3390
ADARUN DSF=YES
ADARUN UEX2=USEREX2M
ADARUN PROG=ADARES,MODE=MULTI
ADARES PLCOPY OPENOUT
ADARES DSIMSIZE=5
//DDSIAUS1 DD DSN=EXAMPLE.PLOG.G0244V00,UNIT=3390,
// SPACE=(TRK,(10,1)),DISP=NEW,DCB=(RECFM=VB,
// BLKSIZE=27998,LRECL=27994),
// VOL=SER=(SMS018)
DDSIAUS1 VOLSER=SMS018 FROM BLOCK=1
TO BLOCK =9
FROM DATE =yyyy-01-13 17:07:39
TO DATE =yyyy-01-13 17:11:30
VOLUME IS ASSOCIATED WITH PLOG NO. 8
A D A R A I TERMINATED NORMALLY yyyy-01-13 16:12:03
A D A R A I Vv.v SMv DBID = 00059 STARTED yyyy-mm-dd hh:mm:ss
PARAMETERS:
ADARAI LIST
18:45:04 ADAI64 FILE RLOGR1 HAS BEEN OPENED IN ECKD MODE
18:45:04 ADAI64 FILE RLOGM1 HAS BEEN OPENED IN ECKD MODE
RECOVERY LOG FILE FOR DATABASE 59
START RABN FOR LOG DATA AREA IS 26
HIGHEST LOG AREA RABN IS 633
CURRENT VALUE FOR ROTATING RABN IS 26
I GEN- I I BLOCK I DATE /TIME I
I NUMBER I S I FROM TO I FROM TO I
I--------I---I-----------------I--------------------------------------------I
I 1 I N I 26 26 I yyyy-08-30 17:06:51 yyyy-08-30 18:44:35 I
I 0 I R I 25 25 I yyyy-08-30 17:01:02 yyyy-08-30 17:05:05 I
I--------I---I-----------------I--------------------------------------------I
*** yyyy-08-30 17:06:51
*** SAVE DATABASE OFFLINE NON INCREMENTAL
SAVE DATASET PLOG NUMBER = 1966
ADASAV SAVE
// TLBL SAVE1,'PMIG.ADAvrs.SAVE1',0,ADES01
DDSAVE1 VOLSER=XXXXXX FROM BLOCK=1
TO BLOCK =6192
VOLUME IS ASSOCIATED TO PLOG NO. 1966
FILE=001,002,003,004,005,006,008,009,010,011,012,013,014,015
FILE=016,017,019,021,022,023,025,027
DDSAVE1 VOLSER=XXXXXX FROM BLOCK=1
TO BLOCK =31961
VOLUME IS ASSOCIATED TO PLOG NO. 1966
FILE=001,002,003,004,005,006,008,009,010,011,012,013,014,015
FILE=016,017,019,021,022,023,025,027
*** yyyy-08-30 17:08:12 NUCLEUS PLOG NUMBER=1967
*** START NUCLEUS SESSION
*** yyyy-08-30 17:10:15 NUCLEUS PLOG NUMBER=1967
*** ADABAS UTILITY RUNSYNP-CHECKPOINT ID IS 35 (UNLOAD FILE)
SYNP-CHECKPOINT IS FOUND ON PLOG 1967 IN BLOCK NO. 5
FILE=001
ADAULD FILE=1 NUMRECS=100
// DLBL OUT1,'VSESP.SAPLB.ULD2',7,SD
// EXTENT SYS034,SYSWK1,1,0,16365,30
*** yyyy-08-30 17:14:28 NUCLEUS PLOG NUMBER=1967
*** ADABAS UTILITY RUN
SYNP-CHECKPOINT ID IS 35 (UNLOAD FILE)
SYNP-CHECKPOINT IS FOUND ON PLOG 1967 IN BLOCK NO. 8
FILE=001
ADAULD FILE=1 NUMRECS=100
// DLBL OUT1,'VSESP.SAPLB.ULD2',7,SD
// EXTENT SYS034,SYSWK1,1,0,16365,30
*** yyyy-08-30 18:44:35 NUCLEUS PLOG NUMBER=1967
*** ADABAS UTILITY RUN
SYNP-CHECKPOINT ID IS 30 (LOAD FILE)
SYNP-CHECKPOINT IS FOUND ON PLOG 1967 IN BLOCK NO. 12
FILE=004
ADALOD LOAD FILE=4,ISNREUSE=YES,SORTSIZE=5,TEMPSIZE=5,DSSIZE=50B
ADALOD
MAXISN=10,NAME='TESTFILE',DSREUSE=YES,LWP=1000000,LIP=500
ADALOD NUMREC=5,NISIZE=5B,UISIZE=5B
// DLBL EBAND,'VSESP.SAPLB.ULD2',7,SD
// EXTENT SYS011,SYSWK1,1,0,16365,30
ADAI03 RLOGR1 3 READS 0 WRITES
ADAI03 RLOGM1 1 READS 0 WRITES
A D A R A I TERMINATED NORMALLY yyyy-08-30 18:45:03