The unload and load utilities for the Adabas triggers and stored procedures facility are part of the online Trigger Maintenance facility and are run in a Natural environment:
| Utility | ... is used to |
|---|---|
| TRGUNLD | unload trigger definitions from the Adabas trigger file and related file-field table entries and write them to a work file. |
| TRGLOAD | load trigger definitions and related file-field tables from the TRGUNLD work file into the trigger file. |
The work file for TRGUNLD is a Natural work file (work file 1) that is defined either
in the batch job; or
to the Natural environment where the unload utility is running.
The TRGUNLD work file is used as input to the TRGLOAD utility.
A report is prepared at the end of the unload or load summarizing the triggers processed.
This document covers the following topics:
To invoke a utility:
Issue the name of the utility (TRGUNLD or TRGLOAD) as a command, optionally followed by a parameter list.
Parameters are used to limit the triggers to be processed.
Individual parameter values must be separated by the input delimiter (ID): the default is a comma ",". The input-mode parameter IM should be set to delimiter mode IM=D.
When executing a utility as a batch job, the batch job must log on to the SYSTRG library before executing the selected utility and its parameter list.
If the TRGULND utility is invoked from the command line in the online system without a parameter list, the following window is presented:
17:51:42 ***** A D A B A S TRIGGER MAINTENANCE ***** YYYY-MM-DD
User
|--------------------------------------------------------------------|
| 17:51:46 **** A D A B A S TRIGGER MAINTENANCE **** YYYY-MM-DD |
| ----------------- Trigger Unload Utility ------------------- |
| |
| Specify the following information to identify |
| the Triggers to be unloaded to Work File 1: |
| |
| File Name ..... ________________________________ |
| Field ......... ________________________________ |
| Pre-triggers .. ____ |
| Command Type .. __ |
| Active State .. _ |
| Trigger Type .. _ |
| |
| Use 'PF3' to cancel or hit Enter' when ready |
|--------------------------------------------------------------------|
Command ==> trgunld
Enter-PF1---PF2---PF3---PF4---PF5---PF6---PF7---PF8---PF9---PF10--PF11--PF12---
Help Exit Field Trigr Admin Procs FTRG FDIC Canc |
Enter values for the parameters as needed to limit the trigger definitions being unloaded. Any parameters left blank assume the default values.
If no parameters are specified for TRGUNLD, all triggers on the trigger file are unloaded and the related file-field table entries as well.
If the TRGLOAD utility is invoked from the command line in the online system without a parameter list, the following window is presented:
18:13:43 ***** A D A B A S TRIGGER MAINTENANCE ***** YYYY-MM-DD
User DBAU |---------------------------------------------------------|nr 105
| |
| --------------- Trigger Load Utility ------------- |
| |
| Specify the following information to identify |
| the Triggers to be loaded from Work File 1: |
| |
| File ...... ________________________________ |
| Field ..... ________________________________ |
| Replace ... ___ |
| With FFT .. ___ |
| |
| Use 'PF3' to cancel or hit Enter' when ready |
| |
|---------------------------------------------------------|
Command ==> trgload
Enter-PF1---PF2---PF3---PF4---PF5---PF6---PF7---PF8---PF9---PF10--PF11--PF12---
Help Exit Field Trigr Admin Procs FTRG FDIC Canc |
If no parameters are specified for TRGLOAD, all triggers and file-field table entries found on the TRGUNLD work file are loaded into the trigger file.
The following "wildcard" or special character notation can be used in values specified for FILE and FIELD parameters discussed in the following sections for each utility:
| Character | Example | Load triggers with file or field names... |
|---|---|---|
| * | PERS* | that start with "PERS" |
| > | PERS> | that have a value greater than "PERS" |
| < | PERS< | that have a value less than "PERS" |
The following parameters are available to limit the triggers unloaded from the trigger file into the work file during TRGUNLD processing (the default value for each parameter is "*" to include all possibilities):
| Parameter | Description | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| FILE |
|
||||||||||||||
| FIELD |
|
||||||||||||||
| PRE |
|
||||||||||||||
| CMD |
|
||||||||||||||
| ACT |
|
||||||||||||||
| TYPE |
|
||||||||||||||
TRGUNLD FILE=EMPLOYEES
Specifying the FILE parameter limits the triggers unloaded to those defined for the specified file, in this case the EMPLOYEES file.
TRGUNLD FILE=VEHICLES,PRE=Y,ACT=A,TYPE=N
Combining parameters further limits the triggers unloaded. In this case, only active, non-participating pre-triggers defined for the VEHICLES file are unloaded. Note that the parameters must be separated by the input delimiter as specified in the ID parameter in the Natural environment.
The following parameters are available to limit the triggers loaded from the TRGUNLD work file to the trigger file during TRGLOAD processing:
| Parameter | Description | ||||||
|---|---|---|---|---|---|---|---|
| FILE |
|
||||||
| FIELD |
|
||||||
| FFT |
|
||||||
| REPLACE |
|
||||||
TRGLOAD FILE=EMP*
Load into the trigger file all file-field table entries and triggers found on the TRGUNLD input work file for files starting with "EMP".
TRGLOAD FFT=N,REPLACE=Y
Ignore any file-field table entries read from the work file. If any trigger definition read from the work file has the same specifications as an existing trigger definition, replace the existing definition with the definition from the work file.
A report is written out at the end of the unload process stating the number of trigger definitions and the number of file-field table entries unloaded.
The first page of the report indicates the source file and database for unloading the triggers and summarizes the selection criteria. Following this is a list of each record being unloaded into the work file:
18:12:00 ***** TRIGGERS UNLOAD UTILITY ***** YYYY-MM-DD DBAUSER Unloading from Trigger File 12 on Database 105 Rec File Details --- ----- ----------------------------------------------------------- Unloading Pre and Post Triggers for file(s) * and field name(s) * for all command types FFT 45 ZB-FIELD (ZB,2,A) FFT 45 ZF-FIELD (ZF,2,A) FFT 45 ZZ-FIELD (ZZ,4,P) TRG 45 CMD=R FLD=ZB PRTY=01 PGM=RBEGIMU PRE=S TYP=P PRM=C RB=U GRP 4 Group Record FFT 4 ADDRESS-LINE (AI,20,A) FFT 4 AREA-CODE (AN,6,A) FFT 4 BIRTH (AH,6,U) . . . |
The end of the report lists a summary count of records written to the work file. The physical work file written includes these records plus two additional records used for internal purposes.
18:13:04 ***** TRIGGERS UNLOAD UTILITY ***** YYYY-MM-DD DBAUSER Unloading from Trigger File 12 on Database 105 Rec File Details --- ----- ----------------------------------------------------------- FFT 7 NA-FIELD (NA,40,A) FFT 7 NT-SUPER (NT,110,A) FFT 7 TI-FIELD (TI,70,A) FFT 7 TY-FIELD (TY,10,A) TRG 7 CMD=R FLD=** PRTY=90 PGM=NACNN200 PRE=S TYP=A PRM=C RB=N Total records written to Work File 1 File-Field Table Entries: ... 141 Group Control Records: ...... 2 Trigger Definitions: ........ 13 Total Records: .............. 156 *** TRGUNLD completed successfully. *** |
The final page of the report summarizes the triggers unloaded by catagories. This report is useful for cross-checking with the TRGLOAD utility.
**** Trigger Unload Statistics ****
Number of Triggers Unloaded by Categories
Pre or Post : Pre: 7
Post: 6
Trigger Type: Asynchronous: 6
Participating: 3
Non-Participating: 4
Command Type: READ: 6
FIND: 0
INSERT: 0
DELETE: 2
UPDATE: 1
*ANY*: 4
Field Criteria: *ANY*: 4
Specific: 9 |
A report is written at the end of the unload process, stating the number of trigger definitions and the number of file-field table entries loaded.
The first page of the report indicates the target database for loading the triggers, the source database where the workfile was created, and a summary of the selection criteria. Following this is a list of each record being loaded into the work file.
20:05:05 ***** TRIGGERS LOAD UTILITY ***** YYYY-MM-DD DBAUSER Rec File Details --- ----- ----------------------------------------------------------- Loading Trigger Definitions into database 106 file 14 from dataset unloaded from database 105 file 12 created on 1999-07-26 20:04 from version 711 FFT 50 AA-FIELD (AA,8,A) FFT 50 AC-FIELD (AC,20,A) FFT 50 AD-FIELD (AD,20,A) FFT 50 AE-FIELD (AE,20,A) FFT 50 AF-FIELD (AF,1,A) FFT 50 AG-FIELD (AG,1,A) FFT 50 AH-FIELD (AH,6,U) FFT 50 AI-FIELD (AI,20,A) FFT 50 AJ-FIELD (AJ,20,A) FFT 50 AK-FIELD (AK,10,A) . . . |
The end of the report lists a summary count of records read from the work file and how they were loaded into the database.
20:08:43 ***** TRIGGERS LOAD UTILITY ***** YYYY-MM-DD DBAUSER Rec File Details --- ----- ----------------------------------------------------------- TRG 5 CMD=R FLD=AA PGM=CAROL PRE=P TYP=A PRM=C RB=N Total records loaded from Work File 1 File-Field Table Entries: ... 109 Group Control Records: ...... 1 Trigger Definitions: ........ 65 Total Records Loaded: ....... 175 Records found with errors ... 0 Total Records Read: ......... 178 *** TRGLOAD completed successfully. *** |
The final page of the report summarizes the triggers loaded by catagories. This report is useful for cross-checking with the TRGUNLD utility.
******* Trigger Load Statistics *******
Number of Triggers Loaded by Categories
Pre or Post : Pre: 34
Post: 31
Trigger Type: Asynchronous: 23
Participating: 32
Non-Participating: 10
Command Type: READ: 25
FIND: 6
INSERT: 14
DELETE: 2
UPDATE: 3
*ANY*: 15
Field Criteria: *ANY*: 19
Specific: 46 |
| Code | Meaning |
|---|---|
| 000 | Function completed successfully. |
| 013 | Invalid file-field table entry specified. Triggers requires access to a file-field table that maps long file names to file numbers and field names to Adabas two-character field identifiers. See section File-Field Tables for more information. |
| 016 | No trigger definition found with this criteria. |
| 023 | Field name not found for this file. The field name specified does not exist in the file-field table for this file. See section File-Field Tables for more information. |
| 025 | Invalid command type. See list above for valid values. |
| 027 | No field found for this file and command type. |
| 029 | No trigger found for this file, command, and field criteria. |
| 039 | Natural subprogram name is invalid. |
| 041 | Trigger type may be "A", "N", or "P" only. |
| 042 | CALLNAT type may be "C", "E", or "N" only. |
| 043 | Record buffer usage may be "A", "N", or "U" only. |
| 047 | Trigger already exists with this criteria. |
| 103 | File name must not be blank. |
| 110 | File-field table entry already exists for file. |
| 1xxx | Function resulted in an Adabas response code 22 where "xxx" represents the subcode. |
| 3xxx | Nonzero Adabas response code was returned, where "xxx" is the actual Adabas response code. |
| 9999 | Function not successful. Verify parameters and existing trigger definitions. For more information, contact your Software AG technical support representative. |
