ADADBM (Database Modification)

This document describes the utility "ADADBM".

The following topics are covered:


Functional Overview

The ADADBM utility consists of the following functions which may be used to make modifications to the database:

  • The ADD_CONTAINER function adds a new container file to the Associator or Data Storage data set;

  • The ADD_FIELDS function adds new fields to the end of a file's FDT;

  • The ALLOCATE NI, UI, AC or DS function increases the Normal Index, Upper Index, Address Converter or Data Storage space assigned to a file;

  • The BT function sets/clears the NOBT flag for an existing file;

  • The CHANGE function changes the standard length of a field in the Field Definition Table (FDT);

  • The CHANGE_FIELDS function modifies one or more field specifications in a file;

  • The DEALLOCATE functions are the inverse functions of ALLOCATE. The NI, UI, AC or DS function returns the Normal Index, Upper Index, Address Converter or Data Storage space which is no longer required by a file to the free space table (FST);

  • The DELCP function deletes old checkpoint records from the checkpoint file in the specified range of dates;

  • The DELETE function deletes a single Adabas file or a range of Adabas files from the database;

  • The DELETE_DATABASE function deletes a database. Depending on the keyword specified, either just the containers are deleted, or the database directory and its content are deleted.

  • The DISPLAY function displays the utility communication block (UCB);

  • The DROP_FIELDS function marks the specified fields as not existing, which means that they can no longer be accessed ;

  • The DROP_LOBFILE function is the inverse function of ADAFDU ADD_LOBFILE;

  • The DROP_REFINT function drops an existing referential constraint;

  • The EXTEND_CONTAINER function extends the last container file defined for the database;

  • The NEW_DBID function changes the identifier of the database in use;

  • The NEWWORK function allocates and formats a new Adabas WORK data set;

  • The PGM_REFRESH function enables or disables refreshing an Adabas file inside an application program with an E1 command;

  • The RBAC_FILE function creates the RBAC system file required for Adabas authorization mode.

  • The RECORDSPANNING function enables/disables record spanning for a file;

  • The RECOVER function returns lost space to the free space table;

  • The REDUCE_CONTAINER function reduces the size of the last container file defined for the database;

  • The REFRESH function resets a single file or a range of files to the state of zero records loaded;

  • The REMOVE_CONTAINER function removes a container file from the Associator, or Data Storage data set;

  • The REMOVE_DROP function, used in conjunction with a subsequent REFRESH, removes dropped fields from the FDT;

  • The REMOVE_REPLICATION function stops all replication processing and deletes the replication system files;

  • The RENAME function changes the database name or names of loaded files;

  • The RENUMBER function renumbers a loaded file or exchanges the numbers of loaded files;

  • The REPLICATION_FILES function creates the system files required for Adabas - Adabas replication;

  • The RESET function removes entries from the UCB;

  • The RESET_REPLICATION_TARGET function resets the replication target flag of Adabas files;

  • The REUSE function controls the reusage of Data Storage space or ISNs by Adabas;

  • The SECURITY function sets the security mode of the database;

  • The SYFMAX function specifies the maximum number of values generated for a system generated multiple-value field in the file specified.

This utility is a multi-function utility.

Procedure Flow

graphics/adadbm1_new.png

Online Mode

If the Adabas nucleus is active, ADADBM calls the nucleus to modify the database containers. For some tasks, no checkpoints are written, but the activity is logged in the database log, and in the case of a recovery, the activity is re-executed automatically.

graphics/adadbm3_new.png

Offline Mode

If the Adabas nucleus is not active, ADADBM itself modifies the database containers.

Data Set Environment
Variable/
Logical Name
Storage
Medium
Additional Information
Associator ASSOx Disk  
Data storage DATAx Disk  
DBnnn.INI   Disk Adabas Extended Operations Manual
Control statements stdin   Utilities Manual
ADADBM messages stdout   Messages and Codes
Protection Log
(online mode only)
NUCPLG Disk Utilities Manual:
ADANUC, ADAPLP
Temporary storage
(offline mode only)
TEMP1 Disk New WORK data set for the NEWWORK function. After this function is performed, the Work environment variable/logical name must be changed to point to the new Work data set.
Work WORK1 Disk  

Checkpoints

The following table shows the nucleus requirements for each function and the checkpoints written:

Function Nucleus must be active Nucleus must NOT be active Nucleus is NOT required Checkpoint written
ADD_CONTAINER     X SYNP
ADD_FIELDS     X

SYNP (offline)

SYNX (online)

ALLOCATE     X SYNP
BT   X   SYNP
CHANGE X     -
CHANGE_FIELDS     X

SYNP (offline)

SYNX (online)

DEALLOCATE     X SYNP
DELCP X     SYNP
DELETE     X

SYNP (offline)

SYNX (online)

DELETE_DATABASE   X   -
DISPLAY     X -
DROP_FIELDS     X

SYNP (offline)

SYNX (online)

DROP_LOBFILE     X SYNP
EXTEND_CONTAINER   for WORK for ASSO or DATA SYNP
NEW_DBID   X (see note 1)   SYNP
NEWWORK   X (see note 1)   SYNP
PGM_REFRESH     X SYNP
RBAC_FILE     X SYNP (see note 3)
RECOVER     X SYNP
RECORDSPANNING     X SYNP
REDUCE_CONTAINER     for ASSO or DATA SYNP
REFRESH     X SYNP
REMOVE_CONTAINER   X   SYNP
REMOVE_REPLICATION   X  

SYNP (offline)

RENAME     X SYNP
RENUMBER     X SYNP
REPLICATION_FILES     X

SYNP (offline)

SYNX (online)

(see note 2)
RESET     X SYNX
RESET_REPLICATION_TARGET        
REUSE X     SYNP
SECURITY   X   SYNP (offline)
SYFMAX     X

SYNP (offline)

SYNX (online)

Notes:

  1. Function requires exclusive access to the database container files
  2. In addition, ADADBM or ADAFDU checkpoints are generated (also in offline mode) to indicate the system file numbers deleted or generated.
  3. In addition, an ADABCK checkpoint is generated, indicating the RBAC system file number.

Control Parameters

The following control parameters are available:

      ADD_CONTAINER = keyword
D                    [,BLOCKSIZE=number[K] ]
                      ,SIZE = number [B|M]

     ADD_FIELDS = number {field_specification|FDT} ... [END_OF_FIELDS]

     ALLOCATE = keyword,  FILE = number [,RABN = number],
                SIZE = number [B|M]

     BT = keyword,  FILE = number 

     CHANGE = number, FIELD = string, LENGTH = number

     CHANGE_FIELDS = number {field_specification|FDT} ... [END_OF_FIELDS]

M    DBID = number

     DEALLOCATE = keyword,  FILE = number [,RABN = number],
                  SIZE = numberB

     DEFINE_REFINT = number  constraint_specification

     DELCP = { * | ([absolute-date] [,[absolute-date]]) }

     DELETE = (number [-number][,number[-number]]...)

     DELETE_DATABASE = keyword

     DISPLAY = UCB

     DROP_FIELDS = number {field_name|FDT} ... [END_OF_FIELDS]

     DROP_LOBFILE = number 

     DROP_REFINT = number, NAME {=|:}constraint_name

     EXTEND_CONTAINER = keyword, SIZE = number [B|M]

D    [NO]LOWER_CASE_FIELD_NAMES

     NEW_DBID = number

     NEWWORK [,BLOCKSIZE=number[K] ], SIZE = number [B|M]

     PGM_REFRESH = keyword, FILE = number

     RBAC_FILE = number

     RECORDSPANNING = keyword, FILE = number

     RECOVER

     REDUCE_CONTAINER = keyword, SIZE = number B

     REFRESH = (number [-number][,number[-number]]...)

     REMOVE_CONTAINER = keyword

     [NO]REMOVE_DROP  

     REMOVE_REPLICATION   

     RENAME = number, NAME {=|:} string

     RENUMBER = (number, number)

     REPLICATION_FILES = (file1, file2, file3, file4)

     RESET = UCB, IDENT = { (number [,number]...) | * }

     RESET_REPLICATION_TARGET = number

     REUSE = (keyword [,keyword]), FILE = number

     SECURITY = keyword

     SYFMAX = number, FILE = number

ADD_CONTAINER

ADD_CONTAINER = keyword
                [,BLOCKSIZE=number[K] ]
                ,SIZE = number [B|M]

The ADD_CONTAINER function adds a new container file to an existing Associator or Data Storage dataset in accordance with the keyword used. The keyword can take the values ASSO or DATA .

The new container file may be allocated on the same device as the current container files or it may be allocated on a different device type.

The placement of the new container file depends on the environment variable/logical name ASSOx or DATAx. This has to be set to a legal file name with its whole path name. If ASSOx or DATAx is not set, the container files are created in the current directory.

Notes:

  1. If you add a new DATA container, free space is required on the existing Associator for the Data Storage Space Table (DSST): 1 byte is required for each new DATA block. Therefore, you should add a new ASSO container first if the existing Associator is full.
  2. If you add a new container while the Adabas nucleus is active, the container is not added by ADADBM, but by ADANUC. In this case, you should consider the following, depending on the way the container files are specified: if the container files are specified as environment variables/logical names, you can only add the new container if you have already defined the corresponding environment variable/logical name for the current nucleus session. If you haven't, you have to terminate the current nucleus session before you can add the new container. If, on the other hand, the container files are specified in the DBnnn.INI files, you can enter the new container in the file just before you add the container, since the nucleus re-reads the file before the container is added (please refer to the Adabas Extended Operation for further information about the DBnnn.INI files).
  3. If you add a new container while the Adabas nucleus is not active, an entry for this new container file is added to the DBnnn.INI file.

BLOCKSIZE = number[K]

This parameter specifies the block size in bytes (or in kilobytes, if "K" is specified after the number) of the new container file.

Adabas rounds up the value you specify to the next multiple of 1K. The minimum block size is 1K and maximum block size is 32K.

The default value for BLOCKSIZE is the block size of the last container file of the dataset in question that is currently present in the database.

SIZE = number [B|M]

This parameter specifies the number of blocks (B) or megabytes (M) to be allocated for the new container file. By default, the size is given in megabytes.

Example

adadbm: add_container=data, size=10
%ADADBM-I-CREATED, dataset DATA2 , file /FS/fs0395/Adabas/adadb/db076/DATA2 created
%ADADBM-I-FUNC, function ADD_CONTAINER executed

A new container file of 10 megabytes is added to the Data Storage. The block size is the same as the block size of DATA1.

ADD_FIELDS

ADD_FIELDS = number {field_specification|FDT}... [END_OF_FIELDS]

The ADD_FIELDS function adds one or more new fields to the end of the file defined by `number'. Specifying a LOB file is not permitted. The function is completed by entering END_OF_FIELDS.

If the field definitions are terminated with the END_OF_FIELDS parameter, this parameter must be specified in upper case when the LOWER_CASE_FIELD_NAMES parameter is used. In addition, the FDT parameter must also be specified in upper case when the LOWER_CASE_FIELD_NAMES parameter is used.

Note:
It is not possible to add derived descriptors using ADADBM - you should use the utility ADAINV to do this instead.

field_specification

The field specification list is entered in the same way as the FDT input in ADAFDU:

level-number, name [,length] [,format] [(,option)...]

The first field to be added must be a level-one field.

The NN option is not permitted. DE is only permitted when the Adabas nucleus is active and together with the NU or NC option. Otherwise use the ADAINV utility to give the new fields descriptor status. UQ is only permitted together with the DE option.

Note:
When you add system-generated fields (fields with the field option SY) to a file, these fields have null values in the records that are already in the database - this is the same behaviour as for fields without the SY option.

FDT

This parameter displays the FDT of the file to which the fields are to be added.

Example

adadbm: add_fields=12
adadbm: fdt

Field Definition Table:

   Level  I Name I Length I Format I   Options      I Flags
-------------------------------------------------------------------------------
  1       I  AA  I   15   I    A   I DE,UQ,NU       I                 
  1       I  AB  I    4   I    F   I FI             I                 
  1       I  AC  I    8   I    A   I DE             I                 
  1       I  CD  I        I        I                I                 
   2      I  AD  I   20   I    A   I DE,NU          I      SP         
   2      I  AE  I   20   I    A   I NU             I                 
   2      I  AF  I   10   I    A   I DE,NU          I                 
  1       I  AG  I    2   I    U   I NU             I      SP         
  1       I  AH  I    1   I    A   I DE,FI          I                 
  1       I  AI  I    1   I    A   I FI             I                 
  1       I  AJ  I    6   I    U   I NU             I      SP         
  1       I  AK  I        I        I                I                 
   2      I  AL  I    3   I    A   I NU             I                 
   2      I  AM  I    4   I    P   I NU,MU          I                 
-------------------------------------------------------------------------------
   Type   I Name I Length I Format I   Options      I Parent field(s)   Fmt
-------------------------------------------------------------------------------
 SUPER    I  AN  I    4   I    B   I NU             I AJ (   5 -   6 )   U 
          I      I        I        I                I AJ (   3 -   4 )   U 
-------------------------------------------------------------------------------
 SUPER    I  AO  I   22   I    A   I NU             I AG (   1 -   2 )   U 
          I      I        I        I                I AD (   1 -  20 )   A 
-------------------------------------------------------------------------------


adadbm: 01,dd,1,a
adadbm: 01,gr
adadbm: 02,g1,20,a,fi
adadbm: fdt

Field Definition Table:

   Level  I Name I Length I Format I   Options      I Flags
-------------------------------------------------------------------------------
  1       I  AA  I   15   I    A   I DE,UQ,NU       I                 
  1       I  AB  I    4   I    F   I FI             I                 
  1       I  AC  I    8   I    A   I DE             I                 
  1       I  CD  I        I        I                I                 
   2      I  AD  I   20   I    A   I DE,NU          I      SP         
   2      I  AE  I   20   I    A   I NU             I                 
   2      I  AF  I   10   I    A   I DE,NU          I                 
  1       I  AG  I    2   I    U   I NU             I      SP         
  1       I  AH  I    1   I    A   I DE,FI          I                 
  1       I  AI  I    1   I    A   I FI             I                 
  1       I  AJ  I    6   I    U   I NU             I      SP         
  1       I  AK  I        I        I                I                 
   2      I  AL  I    3   I    A   I NU             I                 
   2      I  AM  I    4   I    P   I NU,MU          I                 
  1       I  DD  I    1   I    A   I                I                 
  1       I  GR  I        I        I                I                 
   2      I  G1  I   20   I    A   I FI             I                 
-------------------------------------------------------------------------------
   Type   I Name I Length I Format I   Options      I Parent field(s)   Fmt
-------------------------------------------------------------------------------
 SUPER    I  AN  I    4   I    B   I NU             I AJ (   5 -   6 )   U 
          I      I        I        I                I AJ (   3 -   4 )   U 
-------------------------------------------------------------------------------
 SUPER    I  AO  I   22   I    A   I NU             I AG (   1 -   2 )   U 
          I      I        I        I                I AD (   1 -  20 )   A 
-------------------------------------------------------------------------------


adadbm: end_of_fields
%ADADBM-I-FUNC, function ADD_FIELDS executed

ALLOCATE

ALLOCATE = keyword,  FILE = number [,RABN = number], SIZE = number [B|M]

Depending on the keyword specified (AC, DS, NI or UI), the ALLOCATE function increases the Normal Index (NI), Upper Index (UI), Address Converter (AC) or Data Storage (DS) by a given size. Each extent for the required type is checked to see whether it can be extended or not. A new extent is created if none of the current extents can be extended.

This function lets the DBA override the automatic extension method and can be used to preallocate smaller or larger extents. This can be useful when adding a large number of records. Exclusive control of the file is NOT required for this function.

FILE = number

This parameter specifies the file to be extended.

RABN = number

This parameter specifies the allocation start RABN. For NI or UI allocation for a LOB file, the block size of the RABN specified must be less than 16 KB. For DS allocation for a LOB file, the block size of the RABN specified must be 32 KB.

SIZE = number [B|M]

This parameter specifies the size of the expansion area. If a 'B' is appended to size, the size is in blocks, otherwise it is in megabytes.

Example

adadbm: allocate=ni, file=11, size=100b
%ADADBM-I-ALLOC, 100 NI blocks allocated (611 - 710)


adadbm: allocate=ds, file=11, size=10
%ADADBM-I-DEALLOC, 2560 DS blocks allocated (245 - 2804)

BT

This function is used to set or clear the NOBT flag for an existing file. Specifying a LOB file is not permitted. The keyword can take the values YES or NO. It is not permitted to set BT=NO for files that are primary files of referential constraints. This function can only be executed in offline mode.

FILE = number

This parameter specifies the file for which the NOBT flag is to be set/cleared.

Examples

adadbm db=12 bt=yes,file=11           ; clear the NOBT flag for file 11 
adadbm db=12 bt=no,file=11            ; set the NOBT flag for file 11

CHANGE

CHANGE = number, FIELD = string, LENGTH = number

This function changes the standard length of a field in the file specified by number. Specifying a LOB file is not permitted. The length of fixed storage fields (option FI) and floating point fields (format G) cannot be changed.

Changing the length of a field does not lead to any modifications within the Data Storage, but may affect programs that use the standard length.

Fields defined with the option SY=OPUSER cannot be changed.

FIELD = string

This parameter specifies the field whose standard length is to be changed. The field must be defined in the Field Definition Table for this file.

LENGTH = number

This parameter defines the new standard length of the field.

Example

adadbm: change=12, field=ac, len=11
%ADADBM-I-FUNC, function CHANGE executed

CHANGE_FIELDS

CHANGE_FIELDS = number {field_specification|FDT}... [END_OF_FIELDS]

The CHANGE_FIELDS function modifies one or more field specifications of the file defined by `number'. The function is completed by entering END_OF_FIELDS.

If the field definitions are terminated with the END_OF_FIELDS parameter, this parameter must be specified in upper case when the LOWER_CASE_FIELD_NAMES parameter is used. In addition, the FDT parameter must also be specified in upper case when the LOWER_CASE_FIELD_NAMES parameter is used.

The changes that are allowed depend on the existence of records in the file. The following restrictions apply to all files:

  • The field level number must not change;

  • A group must either remain a group or may be converted to a periodic group if it is defined on level 1;

  • A periodic group must either remain a periodic group or may be converted to a non-periodic group;

  • A field that is not a group or periodic group must not be converted to a group or a periodic group.

The following additional restrictions apply to non-empty files:

  • Field length: the new length must be compatible with the new field format and field options. Such a change changes the behaviour of adabas commands in which the field length is not specified in the format buffer;

  • Field format: A may be changed to W and vice versa. It is the responsibility of the user to ensure that the field contains UTF-8 values if the format is changed from A to W. After changing the format from W to A, the field will contain UTF-8 values. Please note that the format specified in the format buffer of Adabas commands must be identical to the format in the field definition for A and W fields - therefore it may be necessary to adapt existing programs accordingly. Other changes of the field format except for the change between A and W are not allowed.

  • Field options: it is not allowed to add or remove the options DE, FI, HF, MU and UQ.

    The following field option changes are allowed:

    Old Field Options New Field Options Comments
    DT not set DT set, TZ not set or set No check is made to see whether the values in the database are compliant with the date/time edit mask specified. TZ may not be set for edit mask names DATE, TIME and NATDATE.

    Caution:
    Usually, the semantics of the field values defined with the TZ option and the field values defined without the TZ option are different: the field without the TZ value usually contains local time values, whereas the field with the TZ value contains UTC values. The field values are not updated automatically; it is the user's responsibility to ensure that necessary updates are made.

    DT set DT not set Specifying a date/time edit mask for the field in the format buffer is no longer allowed.
    HF set HF not set The behaviour of cross-platform calls changes. The file must be empty to apply this change.
    HF not set HF set
    LA and LB not set LA or LB set The behaviour of calls accessing the field with variable length changes.
    LA set LA not set, LB set
    LB set LB not set, LA set Only allowed if there is no LOB file defined for the file or if the field is a descriptor of the parent of a derived descriptor. The behaviour of calls accessing the field with variable length changes.
    NB not set NB set  
    NC and NN set FI, NC, NU and NN not set After this change, the field is no longer mandatory in the format buffer for N1/N2 commands; if not specified, the field gets the Adabas null value.
    NC and NN set NC set, NN not set After this change, the field is no longer mandatory in the format buffer for N1/N2 commands; if not specified, the field gets the SQL null value.
    NU set NC set Empty values are converted to NULL values. Note that NC set -> NU not set because NU and NC are mutually exclusive.
    NV set NV not set The behaviour of cross-platform calls changes.
    NV not set NV set
    SY not set SY set The behaviour of A1, N1 and N2 commands changes. The field format must be compatible with the SY option. Note that no check is made to ensure that the existing values are reasonable.
    SY set SY not set The behaviour of A1, N1 and N2 commands changes.
    TR not set TR set  
    TZ not set DT set TZ set, DT unchanged Values in the database will be converted from UTC to local time when you specify a date/time edit mask.
    TZ set TZ not set Values in the database are no longer converted from UTC to local time when you specify a date/time edit mask.

field_specification

The field specification list is entered in the same way as the FDT input in ADAFDU:

level-number, name [,length] [,format] [(,option)...]

The first field to be added must be a level-one field.

FDT

This parameter displays the FDT of the file to which the fields are to be added.

DBID

DBID = number

This parameter selects the database to be used.

Note:
Utility functions which require or allow the nucleus to be shut down need logical assignments for the data sets.

Examples

adadbm: dbid=76
%ADADBM-I-DBOFF, database 76 accessed offline


adadbm: dbid=76
%ADADBM-I-DBON, database 76 accessed online

DEALLOCATE

DEALLOCATE = keyword,  FILE = number [,RABN = number], 
             SIZE = numberB

DEALLOCATE = AC, DS, NI or UI

Depending on the keyword specified (AC, DS, NI or UI), this function releases a given amount of space from the Address Converter (AC), Data Storage (DS), Normal Index (NI) or Upper Index (UI).

If too much space is allocated to an extent, either automatically or manually, the DBA can release this space and return it to the Free Space Table (FST).

Deallocation is done for only one extent at a time. To release space from multiple extents, DEALLOCATE has to be called several times.

FILE = number

This parameter specifies the file.

RABN = number

This parameter specifies the first RABN to be deallocated. If this parameter is omitted, deallocation starts at the end of the last extent.

SIZE = numberB

This parameter specifies the size of the area to be deallocated, in blocks.

Example

adadbm: deallocate=ni, file=11, size=110b
SIZE=110B
        ^
%ADADBM-E-VALUP, value has to be less-equal 100
%ADADBM-I-ABORTED,      14-NOV-2002 14:44:01, elapsed time: 00:00:00
adadbm: deallocate=ni, file=11, size=100b
%ADADBM-I-DEALLOC, 100 NI blocks deallocated (611 - 710)


adadbm: deallocate=ni, file=11, size=10b
%ADADBM-I-DEALLOC, 10 NI blocks deallocated (323 - 332)

DEFINE_REFINT

DEFINE_REFINT = number constraint_specification

This function adds a referential constraint to the file 'number', which contains a foreign key. The syntax for the constraint is the same as that used in the FDT file for ADAFDU and is described in Administration, FDT Record Structure, Referential Constraints. The constraint is also included in the FDT of the primary file, therefore, the constraint name must not already be defined in the primary file.

Adding a referential constraint is not allowed if the file specified as the primary file is defined with PGM_REFRESH=YES.

If there are violations of the referential integrity, adding of the constraint will fail - no updates are performed on the data of the file in order to establish referential integrity.

DELCP

DELCP = { * | ([absolute-date] [,[absolute-date]]) }

This function deletes checkpoint records from the checkpoint file.

If an asterisk '*' is entered, all checkpoint records are deleted.

Examples

adadbm: delcp=13-NOV-2006:15:09:48
%ADADBM-I-DELCP, 1 record deleted from CHECKPOINT file

adadbm: delcp=(13-NOV-2006:15:09:48,)
%ADADBM-I-DELCP, 81 records deleted from CHECKPOINT file

adadbm: delcp=(,14-NOV-2006:14:37:24)
%ADADBM-I-DELCP, 41 records deleted from CHECKPOINT file

adadbm: delcp=(14-NOV-2006:14:37:25,14-NOV-1996:14:38:15)
%ADADBM-I-DELCP, 42 records deleted from CHECKPOINT file

adadbm: delcp=*
%ADADBM-I-DELCP, 20 records deleted from CHECKPOINT file

DELETE

DELETE = (number [-number][,number[-number]]...)

The DELETE function deletes one or more files or ranges of files from the database and returns all space which was allocated for this file to the Free Space Table (FST). LOB files specified are ignored, but the LOB files assigned to all base files specified are deleted too. There must not be a referential constraint between a file that is to be deleted and another file, which is not specified. Deletion of system files is not allowed.

Note:
If you want to stop using Adabas-to-Adabas replication, and therefore want to delete the replication system files, you must use ADADBM REMOVE_REPLICATION, not the DELETE FUNCTION.

ADADBM does not request confirmation of the files to be deleted, i.e. care should be taken when entering the file numbers.

Example

adadbm: delete=(4-11,14)
%ADADBM-I-DELETED, file 11 deleted
%ADADBM-I-DELETED, file 14 deleted

DELETE_DATABASE

DELETE_DATABASE = keyword

The DELETE_DATABASE function deletes a database. Depending on the keyword specified (CONTAINER or FULL), either just the containers are deleted, or the database directory and its contents are deleted.

If you specify the keyword CONTAINER, the container files and the DBID entry in the [DB_LIST] section of the ADABAS.INI file will be deleted. If you specify the keyword FULL, the database directory and all of its contents will be deleted.

Example:

adadbm: dbid=12 delete_database=container

The containers of the database with the DBID 12 will be deleted.

DISPLAY

DISPLAY = UCB

The DISPLAY function displays the utility communication block. This function can also be executed during a pending AUTORESTART.

Example:

adadbm: display=ucb

       Date/Time        Entry Id  Utility  Mode Files
       ---------        --------  -------  ---- -----
14-NOV-2006 14:38:40         233   adaopr  UTO  11 
14-NOV-2006 14:38:42         234   adabck  ACC  *

The display shows the following items:

  • DATE/TIME shows the date and time on which the given files were locked.

  • ENTRY ID shows the allocated identification of the entry.

  • UTILITY shows the name of the utility.

  • MODE shows the mode in which the files are being accessed.

  • FILES shows the file numbers of the files that are locked.

DROP_FIELDS

DROP_FIELDS = number {field_name|FDT}... [END_OF_FIELDS]

The DROP_FIELDS function drops one or more fields from the file defined by `number' - the specified fields are marked as no longer existing and they cannot be accessed. Specifying a LOB file is not permitted. The function is completed by entering END_OF_FIELDS.

If the field definitions are terminated with the END_OF_FIELDS parameter, this parameter must be specified in upper case when the LOWER_CASE_FIELD_NAMES parameter is used. In addition, the FDT parameter must also be specified in upper case when the LOWER_CASE_FIELD_NAMES parameter is used.

If you specify a group or a periodic group, all of the fields that belong to the group or periodic group are dropped. You must not specify a field that is a descriptor or from which a descriptor is derived - if you want to drop such a field, you must first release all corresponding descriptors with ADAINV.

Once the DROP_FIELDS function has been executed, you can redefine the names of the dropped fields, for example using ADADBM's ADD_FIELDS function.

Notes:

  1. The DROP_FIELDS function does not physically remove the fields. You should not drop and then add fields repeatedly, since this can cause the data records or the FDT of the file in question to overflow.
  2. ADAMUP is not able to load data into a file that contains the same visible fields but which contains different dropped fields.

FDT

This parameter displays the FDT of the file from which the fields are to be dropped.

DROP_LOBFILE

DROP_LOBFILE = number 

The number must specify the file number of a base file with an empty assigned LOB file to be deleted.

DROP_LOBFILE is not allowed if the assigned LOB file is not empty.

DROP_REFINT

DROP_REFINT = number, NAME {=|:} constraint_name

The function removes a referential constraint from the file specified by 'number', which contains the foreign key. The constraint is also removed from the FDT of the primary file.

EXTEND_CONTAINER

EXTEND_CONTAINER = keyword, SIZE = number [B|M]

The EXTEND_CONTAINER function extends the last Associator, Data Storage or WORK container file defined for the database in accordance with the keyword used. The keyword can take the values ASSO, DATA or WORK.

Note:
The WORK container can only be extended in the offline mode.

SIZE = number [B|M]

This parameter specifies the size of the expansion area in blocks (B) or megabytes (M). By default, the size is in megabytes.

[NO]LOWER_CASE_FIELD_NAMES

[NO]LOWER_CASE_FIELD_NAMES

If LOWER_CASE_FIELD_NAMES is specified, Adabas field names are not converted to upper case. If NOLOWER_CASE_FIELD_NAMES is specified, Adabas field names are converted to upper case. The default is NOLOWER_CASE_FIELD_NAMES.

This parameter must be specified before the ADD_FIELDS, CHANGE_FIELDS or DEFINE_REFINT parameters.

NEW_DBID

NEW_DBID = number

This function is used to change the identifier of the database in use. The new identifier may not already be in use by another active database.

Example

adadbm: new_dbid=77
%ADADBM-I-FUNC, function NEW_DBID executed

NEWWORK

NEWWORK [,BLOCKSIZE = number[K] ], SIZE = number [B|M]

This function removes the existing WORK1 container file and replaces it with a new WORK1 container file. The new WORK1 container file is allocated and then formatted, if required.

Before a new WORK can be created, the nucleus and all utilities using the database must have been successfully terminated. Since this function requires the current WORK, it must not be deleted before NEWWORK has been executed. TEMP1 must point to the new work file when this function is used.

Note:
The new WORK can be directed to a disk section or to a file system. If TEMP1 points to the same disk section as WORK1, then ADADBM tries to extend/reduce the existing WORK file. In each case the name of the new WORK container file is WORK1. If the function completes successfully, the old WORK1 gets deleted.

BLOCKSIZE = number[K]

This parameter specifies the block size in bytes (or in kilobytes, if "K" follows the number) of the new container file.

Adabas rounds up the value you specify to the next multiple of 1024.

The minimum block size allowed is 3072 and the maximum block size allowed is 32768.

In addition to these minimum and maximum values, the following size restrictions apply in general to the block sizes for ASSO and WORK:

MAX (ASSOBLS) < WORKBLS

where MAX(ASSOBLS) represents the largest ASSO block size and WORKBLS represents the WORK block size.

The default value for BLOCKSIZE is the block size of the old WORK file.

SIZE = number [B|M]

This parameter specifies the number of blocks or megabytes to be allocated for the new WORK file. By default, the size is in megabytes. The minimum value is 200 blocks or the equivalent value in megabytes.

PGM_REFRESH

PGM_REFRESH = keyword, FILE = number

This function is used to disable or enable refreshing an Adabas file inside an application program with an E1 command (ISN = 0, CID = BLANK). Specifying a LOB file is not permitted. The keyword can take the values YES or NO. It is not allowed to set PGM_REFRESH=YES for files that are primary files of referential constraints.

FILE = number

This parameter specifies the file for which refreshing is to be enabled/disabled.

RBAC_FILE

RBAC_FILE = number

This function creates the RBAC system file and loads the initial security definitions.

This function makes use of the ADABCK restore functionality. The RBAC system file requires a block size of 2K for the ASSO container, and a block size of 4K for the DATA container. If necessary, corresponding extents are allocated automatically.

For further information please refer to ADABCK RESTORE and Adabas Basics - Container Files.

Example

adadbm: rbac_file=200

RECORDSPANNING

This function is used to disable or enable record spanning for a file. The keyword can take the values YES or NO. The RECORDSPANNING function can only be specified for a base file that has a LOB file assigned.

FILE = number

This parameter specifies the file for which record spanning is to be enabled/disabled.

Examples

adadbm db=12 recordspanning=yes,file=9           ; enable record spanning for file 9 
adadbm db=12 recordspanning=no,file=9            ; disable record spanning for file 9

RECOVER

RECOVER

This function returns lost space within the Associator and Data Storage to the Free Space Table (FST).

Space can be lost by a non-successful termination of an Adabas utility.

Example

adadbm: recover
%ADADBM-I-FUNC, function RECOVER executed

REDUCE_CONTAINER

REDUCE_CONTAINER = keyword, SIZE = number B

The REDUCE_CONTAINER function deallocates free space at the end of the Associator or Data Storage container defined for the database in accordance with the keyword used. The keyword can take the values ASSO or DATA.

The requested number of blocks must not be in use at the end of the container specified. If the complete space of one or more container extents is to be released, the container extents are removed. Note that the message informing you that a container extent is removed is not displayed by ADADBM if ADADBM is executed online - instead, it is included in the nucleus log.

If less blocks than requested are free at the end of the container, all free space at the end of the container is deallocated, and the following warning is displayed:

%ADADBM-W-PREDCONT, not all requested blocks removed

SIZE = number B

This parameter specifies the size by which the container is to be reduced, in blocks.

REFRESH

REFRESH = (number [-number][,number[-number]]...)

This function resets the files specified by `number' to the state of zero records loaded. Only the first extents for Normal Index, Address Converter and Data Storage are kept. The remaining extents are returned to the Free Space Table (FST). The Upper Index is rebuilt and the unused Upper Index extents are then returned to the Free Space Table. LOB files specified are ignored, but the LOB files assigned to all base files specified are refreshed too. The primary file of a referential integrity constraint may be refreshed only if the foreign file of the referential constraint is also refreshed.

ADADBM does not request confirmation of the files to be refreshed, i.e. care should be taken when entering the file numbers.

This function is useful for clearing a test file in a test environment. This method is faster than deleting and reloading the file.

Files using the ADAM feature cannot be refreshed.

If the REMOVE_DROP function has been specified, dropped fields are removed from the FDT.

Example

adadbm: refresh=13
%ADADBM-I-REFRESH, file 13 refreshed

REMOVE_CONTAINER

REMOVE_CONTAINER = keyword

This function removes the last database container file from an existing Associator or Data Storage data set in accordance with the keyword used. The keyword can take the values ASSO or DATA.

The container file to be removed must not be in use when this function is executed, i.e. all of the blocks in the file must be free.

The container file will be deleted from the file system or from the raw disk section.

Before a container file can be removed, the nucleus and all of the utilities using the database must have terminated successfully.

Note:
If you remove a container, the corresponding entry for this container file in the DBnnn.INI file is deleted.

Example

adadbm: remove_container=data
%ADADBM-I-DMCONREM, container DATA2 removed

REMOVE_DROP

[NO]REMOVE_DROP

If you specify REMOVE_DROP, subsequent REFRESH functions will remove dropped fields from the FDT.

If you specify NOREMOVE_DROP, subsequent REFRESH functions will not remove dropped fields from the FDT.

The default is NOREMOVE_DROP.

Example

adadbm: remove_drop
adadbm: refresh=2
%ADADBM-I-REFRESH, file 2 refreshed
adadbm: refresh=3
%ADADBM-I-REFRESH, file 3 refreshed
adadbm: noremove_drop
adadbm: refresh=4
%ADADBM-I-REFRESH, file 4 refreshed

File 2 has been refreshed and dropped fields have been removed from the FDT. File 3 has been refreshed and dropped fields have been removed from the FDT. File 4 has been refreshed and dropped fields have not been removed from the FDT.

REMOVE_REPLICATION

REMOVE_REPLICATION

This function stops all replication processing and deletes all replication system files.

Note:
This function is only relevant for customers who are using the Adabas Event Replicator with Adabas - Adabas replication.

RENAME

RENAME = number, NAME {=|:} string

This function changes the name of a file or a database. `number' is the number of the file whose name is to be changed. If `number' is 0, the name of the database is changed.

NAME {=|:} string

`string' is the new name of the specified file or database. If you specify an equals sign, the value given for 'string' will be converted to upper case; if you specify a colon, no upper-case conversion is performed.

Example

adadbm: rename=11, name=employee-file
%ADADBM-I-FUNC, function RENAME executed

RENUMBER

RENUMBER = (number, number)

This function changes the file number of a loaded Adabas file. If, however, the file's new number already belongs to a loaded file, the numbers of these files are exchanged.

The first `number' is the file number currently assigned to the file. The second `number' is the new file number to be assigned to the file.

Example:

adadbm: renumber=(12,14)
%ADADBM-I-RENUM, File 12 renumbered to 14
%ADADBM-I-RENUM, File 14 renumbered to 12

REPLICATION_FILES

REPLICATION_FILES = (file1, file2, file3, file4)

This functions performs all of the necessary initialization steps for the Adabas - Adabas replication and creates the replication system files.

file1

The metadata file.

file2

The replication transaction file.

file3

The replication command file.

file4

LOB file for the replication command file.

Notes:

  1. This function is only relevant for customers who are using the Adabas Event Replicator with Adabas - Adabas replication.
  2. After having initialized the Adabas - Adabas replication, the Adabas nucleus will only work after the Adabas Event Replicator has been installed - in particular, the replication exit is required.
  3. The space required for the replication files is about 1 MB of ASSO space (small ASSO blocks with block size < 16 KB) and 5 MB of DATA space (block size 32 KB). If there is a high update load or when a replication is in the status Recording, the replication system files can grow because they store all of the update operations for the replicated files until they have been applied to the target database.

RESET

RESET = UCB, IDENT = { (number [,number]...) | * }

UCB

This function removes one or more entries from the utility communication block (UCB). This option can also be used during a pending AUTORESTART.

The UCB is used to control access to certain resources (the whole database, one or more files, etc.) within a database. It saves information about the Adabas utilities processing the database and the resources attached to them.

An entry is made in the UCB each time a utility is granted access to a resource. This entry contains information about the utility and the resources it locks. The utility automatically removes the entry when the resource is no longer required. Please refer to the DISPLAY=UCB function of this utility for information about how to display the contents of the UCB.

However, certain special conditions (e.g. an aborted ADAMUP) can cause entries to remain in the UCB and keep allocated resources locked. The RESET function releases these resources by removing one or more entries from the UCB.

Resetting a UCB entry also removes the associated entry from the user queue and returns lost blocks to the free space table if the nucleus is active. Otherwise, the resource can be returned to the free space table by using the RECOVER function.

IDENT = { (number [,number]...) | * }

This parameter specifies the unique ID of the entry to be removed. '*' removes all entries.

If the RESET UCB function is used offline, only `*' may be specified.

Example

adadbm: reset=ucb, ident=233
%ADADBM-I-RESUCB1, 1 entry deleted from UCB


adadbm: reset=ucb, ident=(235,234)
%ADADBM-I-RESUCB, 2 entries deleted from UCB


adadbm: reset=ucb, ident=*
%ADADBM-I-RESUCB1, 1 entry deleted from UCB

RESET_REPLICATION_TARGET

RESET_REPLICATION_TARGET = number

This function resets the replication target flag of Adabas files, after which they are handled as normal files again. If you specify 0, the replication target flag of all replication target files is reset; if you specify a file number, the replication target flag of the file with this file number is reset.

Notes:

  1. This function is only relevant for customers who are using the Adabas Event Replicator with Adabas - Adabas replication.
  2. After performing this function, a replication to this replication target is no longer possible - if the replication to this replication target is still active, a new update transaction on the replication source will set the replication to status Error. If you want to replicate data to this replication target again, a new initial state processing is required.

REUSE

REUSE = (keyword [,keyword]), FILE = number

The REUSE function controls the reuse of Data Storage space or ISNs by Adabas.

The File Control Block (FCB) for the specified file is modified to indicate the type of allocation technique to be used when adding new records or moving updated records.

The valid keywords are [NO]DS and [NO]ISN.

If the DS keyword is specified, Adabas scans the Data Storage Space Table (DSST) in order to locate a block with sufficient space. In this case, the first block found with sufficient space is used.

If the NODS keyword is specified, then all newly-added records, together with records that have to be moved to another block (as a result of record expansion caused by updating), are placed in the last used block in the Data Storage extent allocated to the file. If there is not sufficient space in this block, the next block is used.

DS and NODS are mutually exclusive. The default is REUSE = DS.

If the ISN keyword is specified, Adabas may reuse the ISN of a deleted record.

If the NOISN keyword is specified, Adabas does not reuse the ISN of a deleted record for a new record. Each new record will be assigned the next-highest unused ISN.

ISN and NOISN are mutually exclusive. The default is REUSE = NOISN.

FILE = number

This parameter specifies the file.

Example

adadbm: reuse=nods, file=11
%ADADBM-I-FUNC, function REUSE executed


adadbm: reuse=(ds,isn), file=12
%ADADBM-I-FUNC, function REUSE executed

SECURITY

SECURITY = keyword

The SECURITY function sets the security mode of the database. The keyword can either be ACTIVE or WARN.

ACTIVE

The ACTIVE keyword enables the security functionality. ACTIVE implies that only authenticated users are allowed access to the database. Security violations, like authentication or authorization errors, are protocolled as “Error” in the Audit-Trail.

In case of a authentication violation, access to the database is rejected.

Important:
Database security cannot be disabled once it has been activated.

WARN

The WARN keyword enables the security functionality. WARN implies that all users are allowed access to the database. Security violations, like authentication or authorization errors, are protocolled as “Warning” in the Audit-Trail. In case of a security violation, access to the operation is not rejected.

This mode is intended for transitioning applications to use a secure database. See also Nucleus user exit 21.

Important:
The security mode WARN can only be changed to mode ACTIVE.

Default Mode

By default security is not enabled.

SYFMAX

SYFMAX = number, FILE = number

This parameter specifies the maximum number of values generated for a system generated multiple-value field in the file specified. There is no explicit maximum value, but you should bear in mind, that you can get a record overflow if the value is defined too high; the compressed data record should also fit into one DATA block is SYFMAX values are defined for system generated multiple-value fields. If the SYFMAX value is decreased and a record contains more values for system generated fields than the new value of SYFMAX, the excess values are removed during the next update operation for this record.

FILE = number

This parameter specifies the file.

Restart Considerations

ADADBM has no restart capability. At the end of each function, however, the system reports whether execution was successfully completed or not. If it is not successfully completed, the function has to be re-started.