Entire Net-Work LUW Messages

#### Search Results

Search

# Entire Net-Work LUW Messages

All Entire Net-Work messages appear in the net-work.log file located wherever Entire Net-Work log files are stored.

### Overview of Messages

`WCP000I | WCP0001I | WCP0002I | WCP0003I | WCP0004I | WCP0005I | WCP0006I | WCP0007I | WCP0008I | WCP0009I | WCP0010I | WCP0011I | WCP0012I | WCP0013I | WCP0014I | WCP0015I | WCP0016I | WCP0017I | WCP0018I | WCP0019I | WCP0020I | WCP0021I | WCP0022I | WCP0023I | WCP0024I | WCP0025I | WCP0026I | WCP0027I | WCP0028I | WCP0029I | WCP0030I | WCP0031I | WCP0032I | WCP0033I | WCP0035I | WCP0036I | WCP0037I | WCP0038I | WCP0039I | WCP0040I | WCP0041I | WCP0042I | WCP0043I | WCP0044I | WCP0045I | WCP0046I | WCP0047I | WCP0048I | WCP0049I | WCP0050I | WCP0051I | WCP0052I | WCP0053I | WCP0054I | WCP0055I | WCP0056I | WCP0057I | WCP0058I | WCP0059I | WCP0060I | WCP0061I | WCP0062I | WCP0063I | WCP0064I | WCP0065I | WCP0066I | WCP0067I | WCP0068I | WCP0069I | WCP0070I | WCP0071I | WCP0072I | WCP0073I | WCP0074I | WCP0075I | WCP0076E | WCP0077I | WCP0078I | WCP0079I | WCP0080I | WCP0081I | WCP0082I | WCP0083I | WCP0084I | WCP0085E | WCP0086I | WCP0087I | WCP0088I | WCP0089I | WCP0090I | WCP0091I | WCP0092I | WCP0093I | WCP0094I | WCP0095I | WCP0097I | WCP0098I | WCP0099I | WCP0100I | WCP0101W | WCP0102W | WCP0103W | WCP0104W | WCP0105W | WCP0106W | WCP0107W | WCP0108W | WCP0109W | WCP0110W | WCP0111I | WCP0112I | WCP0113I | WCP0114W | WCP0115W | WCP0116W | WCP0117W | WCP0118W | WCP0119W | WCP0120W | WCP0121I | WCP0122I | WCP0123W | WCP0124W | WCP0125W | WCP0126I | WCP0127I | WCP0128I | WCP0131I | WCP0132I | WCP0134I | WCP0135W | WCP0136W | WCP0150I | WCP0151I | WCP0152I | WCP0153I | WCP0154I | WCP0155I | WCP0156I | WCP0157I | WCP0158I | WCP0159I | WCP0160I | WCP0161I | WCP0162I | WCP0203E | WCP0204E | WCP0205E | WCP0206E | WCP0207E | WCP0208E | WCP0209E | WCP0210E | WCP0211E | WCP0212E | WCP0213E | WCP0214E | WCP0215E | WCP0216E | WCP0217E | WCP0218E | WCP0219E | WCP0220E | WCP0221E | WCP0222E | WCP0223E | WCP0224E | WCP0228E | WCP0229E | WCP0230E | WCP0231E | WCP0232E | WCP0233E | WCP0235E | WCPO236E | WCP0237E | WCP0238E | WCP0239E | WCP0240E | WCP0241E | WCP0242E | WCP0243E | WCP0245E | WCP0246E | WCP0247E | WCP0248E | WCP0249E | WCP0250E | WCP0251E | WCP0252E | WCP0253E | WCP0254E | WCP0255E | WCP0256E | WCP0257E | WCP0258E | WCP0259E | WCP0301S | WCP0302S | WCP0303S | WCP0304S | WCP0308S | WCP0310S | WCP0311S | WCP0312S | WCP0313S | WCP0314S | WCP0315S | WCP0316S | WCP0317S | WCP0318S | WCP0319S | WCP0402F | WCP0406F | WCP0407F | WCP0408F | WCP0409F | WCP0410F | WCP0411F | WCP0412F | WCP0413F | WCP0414F | WCP0415F | WCP0416F | WCP0501F | WCP0502F | WCP0503F | WCP0504F | WCP0505F | WCP0506F | WCP0507F | WCP0508F | WCP0509F | WCP0510F | WCP0511F | WCP0512F | WCP0513F | WCP0514F | WCP0515F | WCP0516F | WCP0517F | WCP0518F | WCP0519F | WCP0520F | WCP0521F | WCP0522F | WCP0523F | WCP0524F | WCP0525F | WCP0526F | WCP0551F | WCP0552F | WCP0553F | WCP0554F | WCP0555F | WCP0556E | WCP0557E | WCP0558I | WCP0559I | WCP0560F | WCP0561I | WCP0562I | WCP0563I | WCP0564W | WCP0565F | WCP0601E | WCP0602E | WCP0603E | WCP0604I | WCP0605E | WCP0606I | WCP0607E | WCP0608E | WCP0609E | WCP0610I | WCP0611I | WCP0612E | WCP0613I | WCP0614I | WCP0615I | WCP0616I | WCP0618E | WCP0619E | WCP0620E | WCP0621I | WCP0622I | WCP0623I | WCP0624I | WCP0625E | WCP0626E | WCP0627E | WCP0628I | WCP0629I | WCP0630I | WCP0631E | WCP0632E | WCP0633E | WCP0634E | WCP0635E | WCP0636E | WCP0637E | WCP0638E | WCP0639E | WCP0640I | WCP0641I | WCP0642I | WCPO643I | WCP0644E | WCP0645I | WCP0646E | WCP0647I | WCP0648I | WCP0649I | WCP0650I | WCP0651I | WCP0652I | WCP0653I | WCP0654I | WCPO655I | WCP0656E | WCP0657E | WCP0658E | WCP0659E | WCP0660E | WCP0661E | WCP0670E | WCP0671E | WCP0672E | WCP0673E | WCP0674E | WCP0675E | WCP0676E | WCP0677I | WCP0678E | WCP0679E | WCP0680E | WCP0681E | WCP0682E | WCP0683E | WCP0684E | WCP0685E | WCP0686E | WCP0687E | WCP0689E | WCP0690E | WCP0691E | WCP0692E | WCP0693E | WCP0694E | WCP0695E | WCP0696E | WCP0697E | WCP0698E | WCP0699E | WCP0700E | WCP0701E | WCP0702E | WCP0703E | WCP0704E | WCP0705E | WCP0706E | WCP0707E | WCP0708E | WCP0709I | WCP0710E | WCP0711E | WCP0713E | WCP0714E | WCP0715E | WCP0716E | WCP0717I | WCP0718I | WCP0719E | WCP0720E | WCP0721E | WCP0722E | WCP0723E | WCP0724E | WCP0725E | WCP0726E | WCP0727E | WCP0728E | WCP0729E | WCP0730E | WCP0731E | WCP0732E | WCP0733E | WCP0734E | WCP0735E | WCP0736E | WCP0738E | WCP0739E | WCP0740E | WCP0741E | WCP0742E | WCP0743E | WCP0744E | WCP0745E | WCP0746E | WCP0747E | WCP0749E | WCP0750E | WCP0751E | WCP0752E | WCP0753E | WCP0754I | WCP0755I | WCP0756E`

WCP000I | Software AG Internal tracing
Explanation | Used for Software AG internal tracing.
Action | No action is required for this informational message.

WCP0001I | Incoming connection from Entire Net-Work Server=nodename
Explanation | An incoming connection from the named Entire Net-Work server node has been received. The reference number (ref-num) given in the message is for internal Software AG use only.
Action | No action is required for this informational message.

WCP0002I | DBID=dbid is now active on remote Entire Net-Work Server=nodename
Explanation | The identified database is active on the named Entire Net-Work remote server node and can therefore be accessed from the local node.
Action | No action is required for this informational message.

WCP0003I | DBID=dbid has been deactivated on remote Entire Net-Work Server=nodename
Explanation | The identified database has been deactivated on the named Entire Net-Work server node and is therefore no longer available to the local node.
Action | No action is required for this informational message.

WCP0004I | Outbound connection to Entire Net-Work Classic node=nodename
Explanation | An outbound connection has been made to the named Entire Net-Work classic node.
Action | No action is required for this informational message.

WCP0005I | Node identifier is nodeid, maximum message size is size
Explanation | This message indicates the node identifier and the maximum possible message size acceptable to the remote node specified by the previous log entry.
Action | No action is required for this informational message.

WCP0006I | Entire Net-Work for platform is initializing on hostname
Explanation | Entire Net-Work for the named platform is initializing on the named host computer.
Action | No action is required for this informational message.

WCP0007I | Product Information: Version=version Patch Level=level
Explanation | This message provides the version and patch level for the Entire Net-Work product.
Action | No action is required for this informational message.

WCP0008I | string1 string2
Explanation | This message displays two informational messages strings.
Action | No action is required for this informational message.

WCP0009I | Total Kernel Requests count
Explanation | This message provides the total number of Kernel requests made to the Kernel.
Action | No action is required for this informational message.

WCP0010I | Process Resources: FSIZE (d/d) NOFILE (d/d)
Explanation | This message provides information to Software AG technical support.
Action | No action is required for this informational message.

WCP0011I | Total Direct Clients count
Explanation | This message provides the total number of direct clients connected to the Kernel.
Action | No action is required for this informational message.

WCP0012I | Total Relayed Clients count
Explanation | This message provides the total number of relayed clients connected to the Kernel.
Action | No action is required for this informational message.

WCP0013I | Period time nh.nm.ns
Explanation | This message provides the length of time the Kernel has been running.
Action | No action is required for this informational message.

WCP0014I | e-Business Administration Messages count
Explanation | This message provides the total number of e-business administration messages made to the Kernel.
Action | No action is required for this informational message.

WCP0015I | e-Business Communication Errors count
Explanation | This message provides the total number of e-business communication errors that occurred with the Kernel.
Action | No action is required for this informational message.

WCP0016I | Total Kernel Replies count
Explanation | This message provides the total number of replies made by the Kernel.
Action | No action is required for this informational message.

WCP0017I | Total Kernel Input Bytes count
Explanation | This message provides the total number of bytes input to the Kernel.
Action | No action is required for this informational message.

WCP0018I | Entire Net-Work initialization complete
Explanation | Entire Net-Work has completed the initialization process.
Action | No action is required for this informational message.

WCP0019I | Total Kernel Output Bytes count
Explanation | This message provides the total number of bytes output by the Kernel.
Action | No action is required for this informational message.

WCP0020I | License parameter name
Explanation | This message shows license parameter values.
Action | No action is required for this informational message.

WCP0021I | License 90-day Trial License
Explanation | This message indicates that you are running with a 90-day trial license.
Action | No action is required for this informational message.

WCP0022I | Disconnection requested by remote Entire Net-Work Server=nodename
Explanation | The remote Entire Net-Work node listed in the message has requested a disconnection. The reference number (ref-num) given in the message is for internal Software AG use only.
Action | No action is required for this informational message.

WCP0023I | Disconnection notified by remote Entire Net-Work Server=nodename
Explanation | The remote Entire Net-Work node listed in the message has successfully disconnected. The reference number (ref-num) given in the message is for internal Software AG use only.
Action | No action is required for this informational message.

WCP0024I | This Entire Net-Work log file is being closed by user-name
Explanation | The log file is being closed by a user of the System Management Hub or the NETSTOP utilities. A new net-work.log file is being created.
Action | No action is required for this informational message.

WCP0025I | DBID=dbid is now e-business registered on the local kernel
Explanation | An Adabas database with the identified database number is now available via the Entire Net-Work e-business Listen port (default port number 9010).
Action | No action is required for this informational message.

WCP0026I | DBID=dbid no longer e-business registered on the local kernel
Explanation | The Adabas database with the identified database ID is no longer available via the Entire Net-Work e-business Listen port (default port number 9010).
Action | No action is required for this informational message.

WCP0027I | Immediate disconnect indication from Entire Net-Work Classic node=nodename
Explanation | The identified classic Entire Net-Work node has indicated an immediate disconnection.
Action | No action is required for this informational message.

WCP0028I | Immediate disconnection of DBID=dbid
Explanation | The identified e-business database has indicated an immediate disconnection.
Action | No action is required for this informational message.

WCP0029I | DBID=dbid is now connected to the local kernel
Explanation | The identified e-business Adabas database is now active on the local Entire Net-Work node.
Action | No action is required for this informational message.

WCP0030I | Information from Internal Transport Subsystem:
Explanation | This message provides an internal transport subsystem message as the result of a previously logged error.
Action | No action is required for this informational message.

WCP0031I | Remote Kernel is of type system-type
Explanation | This message provides the operating system or hardware type of the remote Kernel.
Action | No action is required for this informational message.

WCP0032I | Total CPU Time since started nh.nm.ns
Explanation | This message provides the total CPU time that occurred since the Kernel started.
Action | No action is required for this informational message.

WCP0033I | Entire Net-Work for platform timestamp on year-month-day
Explanation | This message identifies the operating system or hardware platform of the Entire Net-Work node as well as the current date and time. The message is provided at intervals in a log file to assist in identifying the Entire Net-Work configuration.
Action | No action is required for this informational message.

WCP0035I | Entire Net-Work Server <Service=service>
Explanation | This message identifies the Entire Net-Work Server.
Action | No action is required for this informational message.

WCP0036I | Entire Net-Work Client <Service=service>
Explanation | This message identifies the Entire Net-Work Client.
Action | No action is required for this informational message.

WCP0037I | Entire Net-Work <Kernel=id>
Explanation | This message identifies the Entire Net-Work Kernel.
Action | No action is required for this informational message.

WCP0038I | e-Business Nodes count
Explanation | This message provides the number of e-business nodes that Entire Net-Work knows about.
Action | No action is required for this informational message.

WCP0039I | Connected e-Business Nodes Count count
Explanation | This message provides the number of e-business nodes to which Entire Net-Work is connected.
Action | No action is required for this informational message.

WCP0040I | *********Periodic statistical data report*********
Explanation | This message is one of many messages that comprise the Periodic Statistical Data Report.
Action | No action is required for this informational message.

WCP0041I | Current Direct Clients count
Explanation | This message is one of many messages that comprise the Periodic Statistical Data Report. It displays the number of current direct clients connected to this node.
Action | No action is required for this informational message.

WCP0042I | Current Relayed Clients count
Explanation | This message is one of many messages that comprise the Periodic Statistical Data Report. It displays the number of current relayed clients connected to this node.
Action | No action is required for this informational message.

WCP0043I | Total Memory Allocations count
Explanation | This message is one of many messages that comprise the Periodic Statistical Data Report.
Action | No action is required for this informational message.

WCP0044I | Total Memory Frees count
Explanation | This message is one of many messages that comprise the Periodic Statistical Data Report.
Action | No action is required for this informational message.

WCP0045I | Known Databases count
Explanation | This message is one of many messages that comprise the Periodic Statistical Data Report.
Action | No action is required for this informational message.

WCP0046I | Active Databases count
Explanation | This message is one of many messages that comprise the Periodic Statistical Data Report.
Action | No action is required for this informational message.

WCP0047I | Local Adabas Calls count
Explanation | This message is one of many messages that comprise the Periodic Statistical Data Report.
Action | No action is required for this informational message.

WCP0048I | Host Counter count
Explanation | This message is one of many messages that comprise the Periodic Statistical Data Report. It displays the number of hosts connected to this node.
Action | No action is required for this informational message.

WCP0049I | Number of Work Units Processed count
Explanation | This message is one of many messages that comprise the Periodic Statistical Data Report.
Action | No action is required for this informational message.

WCP0050I | Classic Node Count count
Explanation | This message is one of many messages that comprise the Periodic Statistical Data Report.
Action | No action is required for this informational message.

WCP0051I | Connected Classic Nodes count
Explanation | This message is one of many messages that comprise the Periodic Statistical Data Report.
Action | No action is required for this informational message.

WCP0052I | Classic Messages Processed count
Explanation | This message is one of many messages that comprise the Periodic Statistical Data Report.
Action | No action is required for this informational message.

WCP0053I | Classic Messages in Progress count
Explanation | This message is one of many messages that comprise the Periodic Statistical Data Report.
Action | No action is required for this informational message.

WCP0054I | Classic Administration Messages count
Explanation | This message is one of many messages that comprise the Periodic Statistical Data Report.
Action | No action is required for this informational message.

WCP0055I | Classic Communication Errors count
Explanation | This message is one of many messages that comprise the Periodic Statistical Data Report.
Action | No action is required for this informational message.

WCP0056I | e-Business Messages Processed count
Explanation | This message is one of many messages that comprise the Periodic Statistical Data Report.
Action | No action is required for this informational message.

WCP0057I | Ping Counter count
Explanation | This message is one of many messages that comprise the Periodic Statistical Data Report. It displays the number of pings to this node.
Action | No action is required for this informational message.

WCP0058I | e-Business Contexts Processed count
Explanation | This message is one of many messages that comprise the Periodic Statistical Data Report. It displays the number of e-business contexts processed by the node.
Action | No action is required for this informational message.

WCP0059I | e-Business Contexts Active count
Explanation | This message is one of many messages that comprise the Periodic Statistical Data Report. It displays the number of active e-business contexts.
Action | No action is required for this informational message.

WCP0060I | Kernel Inbound Requests/Sec rate
Explanation | This message is one of many messages that comprise the Periodic Statistical Data Report. It displays the rate (requests per second) at which inbound requests have been processed by the Kernel.
Action | No action is required for this informational message.

WCP0061I | Kernel Outbound Requests/Sec rate
Explanation | This message is one of many messages that comprise the Periodic Statistical Data Report. It displays the rate (requests per second) at which outbound requests have been processed by the Kernel.
Action | No action is required for this informational message.

WCP0062I | Kernel Inbound Data Rate (Bytes/Sec) rate
Explanation | This message is one of many messages that comprise the Periodic Statistical Data Report. It displays the rate (bytes per second) at which inbound data has been processed by the Kernel.
Action | No action is required for this informational message.

WCP0063I | Kernel Outbound Data Rate (Bytes/Sec) rate
Explanation | This message is one of many messages that comprise the Periodic Statistical Data Report. It displays the rate (bytes per second) at which outbound data has been processed by the Kernel.
Action | No action is required for this informational message.

WCP0064I | Database Requests/Second rate
Explanation | This message is one of many messages that comprise the Periodic Statistical Data Report.
Action | No action is required for this informational message.

WCP0065I | Database Replies/Second rate
Explanation | This message is one of many messages that comprise the Periodic Statistical Data Report.
Action | No action is required for this informational message.

WCP0066I | Database Request Data Rate (Bytes/Sec) rate
Explanation | This message is one of many messages that comprise the Periodic Statistical Data Report.
Action | No action is required for this informational message.

WCP0067I | Database Reply Data Rate (Bytes/Sec) rate
Explanation | This message is one of many messages that comprise the Periodic Statistical Data Report.
Action | No action is required for this informational message.

WCP0068I | Percentage of CPU Usage count
Explanation | This message is one of many messages that comprise the Periodic Statistical Data Report.
Action | No action is required for this informational message.

WCP0069I | Time since started hh:mm:ss
Explanation | This message is one of many messages that comprise the Periodic Statistical Data Report.
Action | No action is required for this informational message.

WCP0070I | e-Business Relay Calls count
Explanation | This message is one of many messages that comprise the Periodic Statistical Data Report. It displays the number of e-business relay calls to this node.
Action | No action is required for this informational message.

WCP0071I | Thread thread-number Work Units Completed count
Explanation | This message is one of many messages that comprise the Periodic Statistical Data Report.
Action | No action is required for this informational message.

WCP0072I | Disconnection indication from DBID=dbid
Explanation | The identified e-business database has indicated an immediate disconnection.
Action | No action is required for this informational message.

WCP0073I | Current CPU usage value
Explanation | The current CPU usage is shown in the message.
Action | No action is required for this informational message.

WCP0074I | Disconnection from Entire Net-Work Server=server-name
Explanation | An attempt to disconnect from a remote Entire Net-Work Server occurred.
Action | No action is required for this informational message.

WCP0075I | Outbound connection to Entire Net-Work Server=server-name"
Explanation | An outbound connection exists for the Entire Net-Work Server listed in the message.
Action | No action is required for this informational message.

WCP0076E | Outbound connection to Entire Net-Work Server=server-name failed rc=rsp
Explanation | The outbound connection for the Entire Net-Work Server listed in the message failed. The response code from the attempt is also given in the message.
Action | Make sure the node of the outbound connection is up and that its parameters are configured correctly. Then refresh the Entire Net-Work Server connections, restarting it if necessary to do so.

WCP0077I | e-Business server listening on TCPIP port=portnum
Explanation | An e-business server is listening on the TCP/IP port listed in the message.
Action | No action is required for this informational message.

WCP0078I | e-Business server listening on SSL port=portnum
Explanation | An e-business server is listening on the SSL port listed in the message.
Action | No action is required for this informational message.

WCP0079I | SMH server listening on TCPIP port=portnum
Explanation | The SMH server is listening on the TCP/IP port listed in the message.
Action | No action is required for this informational message.

WCP0080I | DBID=dbid has now started on the local kernel
Explanation | The identified database is now active on the local Kernel and can therefore be accessed by both classic and e-business clients.
Action | No action is required for this informational message.

WCP0081I | Local DBID=dbid is no longer available
Explanation | The identified database has been deactivated on the local node and is therefore no longer available to any clients.
Action | No action is required for this informational message.

WCP0082I | Shutdown request received for node-name
Explanation | A shutdown request has been received for the node name listed in the message.
Action | No action is required for this informational message.

WCP0083I | Shutdown request received from node-name
Explanation | The identified remote System Management Hub operator has requested a shutdown of Entire Net-Work. This instance will complete its shutdown once various administration tasks have completed.
Action | No action is required for this informational message.

WCP0084I | Signal value=value
Explanation | The message identifies the signal that interrupted the process before it crashed. These values provide system information useful to Software AG technical support.
Action | No action is required for this informational message.

WCP0085E | e-Business server failed with error=number
Explanation | The message indicates that the e-business server failed. An error number is provided in the message.
Action | Contact your Software AG technical support representative for assistance.

WCP0086I | Periodic ping of classic node=node-name took nnnn milliseconds
Explanation | As the result of a periodic heartbeat operations, this classic node was sent a ping message to check its connection path. The classic node replied within the time indicated.
Action | No action is required for this informational message.

WCP0087I | Periodic ping of DBID=dbid took nnnn milliseconds
Explanation | As the result of a periodic "heartbeat" operation, this database was sent a "PING" message to check its availability. The database replied within the time indicated.
Action | No action is required for this informational message.

WCP0088I | Continuation of previous log file, renamed to netxxxxx.log
Explanation | The log file is renamed to netxxxxx.log, where xxxxx is a number. This message appears as the first line on a continuation log file.
Action | No action is required for this informational message.

WCP0089I | e-Business server incoming connection
Explanation | An e-business server incoming connection is described in the message. The reference number (ref-num) listed in the message is for internal Software AG use only.
Action | No action is required for this informational message.

WCP0090I | e-Business server is now connected to nodename
Explanation | The identified server is now connected to the local node. The reference number (ref-num) listed in the message is for internal Software AG use only.
Action | No action is required for this informational message.

WCP0091I | Entire Net-Work Servers nnnnnnnn
Explanation | This message is part of the periodic statistical data report.
Action | None. This message is informational only.

WCP0092I | Entire Net-Work Server=server-name is now registered
Explanation | The identified Entire Net-Work Server is now accessible from the local node.
Action | None. This message is informational only.

WCP0093I | Immediate disconnection from Entire Net-Work Server=server-name
Explanation | An immediate disconnection for the named Entire Net-Work Server occurred. The reference number (ref-num) given in the message is for internal Software AG use only.
Action | No action is required for this informational message.

WCP0094I | Command Parameter=name: value
Explanation | This message lists the value of the parameter used to start the running Kernel.
Action | No action is required for this informational message

WCP0095I | Setting Partition=partition-name"
Explanation | This message indicates that a partition has been defined and gives the name of the partition.
Action | No action is required for this informational message

WCP0097I | e-Business for clients listening on TCPIP port=portnum
Explanation | This message identifies the TCP/IP port number on which e-business clients are listening.
Action | No action is required for this informational message

WCP0098I | e-Business for clients listening on SSL port=portnum
Explanation | This message identifies the SSL port number on which e-business clients are listening.
Action | No action is required for this informational message

WCP0099I | Shutdown complete. Entire Net-Work is terminating.
Explanation | Entire Net-Work is shutting down.Entire Net-Work
Action | No action is required for this informational message.

WCP0100I | Classic server listening on TCPIP port=%d
Explanation | This message identifies the TCP/IP port on which a classic server is listening.
Action | No action is required for this informational message.

WCP0101W | Duplicate database number dbid detected on Kernel kernel-name
Explanation | A Kernel has indicated that the identified database is active. However, the local node is already aware of this database due to a previous connection. The duplication is ignored and the original path to the database is maintained.
Action | This error may be caused by a genuine duplication of a database number, which should be corrected by the DBA or by excessively complex connections among classic Entire Net-Work nodes. You should examine your configuration to determine if the connections causing this message can be eliminated.

WCP0102W | No outbound connections defined for this configuration
Explanation | Entire Net-Work cannot make outbound connections unless connections to other classic Entire Net-Work nodes are defined.
Action | If outbound connections are desired, they must be defined. For more information, see the section .

WCP0103W | Adabas Context=context DBID=dbid Client=client-id Timeout deletion
Explanation | The Adabas context listed in the message has been deleted for the database listed in the message.
Action | No action is required for this warning message.

WCP0104W | Remote administration of this kernel has been disabled
Explanation | The local Entire Net-Work Kernel cannot be administered remotely by a System Management Hub. This is normally the result of a specific configuration action to inhibit remote management.
Action | If remote management is desired, the Entire Net-Work Kernel must be restarted with configuration changes.

WCP0105W | e-Business incoming connection from Entire Net-Work Server=servername
Explanation | A connection between two Entire Net-Work nodes was detected. This is not recommended and is usually an indication of a configuration error.

WCP0106W | Remote kernel rejected connection request. rc=code
Explanation | The remote kernel has rejected a connection from Entire Net-Work for open systems. Typical reasons include: incorrect configuration at the remote node unsolicited mode not enabled at the remote node errors in DNS or DHCP operation
Action | No action is required for this informational message.

WCP0107W | Remote kernel rejected connection. Local kernel is unknown
Explanation | A connection attempt from the local kernel was rejected by a classic remote node because the local kernel was not defined.
Action | Add the name of the local kernel to the definitions at the remote node or enable unsolicited connections at the remote node.

WCP0108W | Adabas Context=context DBID=dbid Client=client-id Set for timeout deletion
Explanation | The Adabas context listed in the message for the database and owners listed in the message is scheduled for deletion.
Action | No action is required for this warning message.

WCP0109W | Local DBID=dbid starting, but previous location was remote
Explanation | A database has started on the local node; however, this database ID was previously used by another database on a remote node.
Action | This indicates a configuration error that needs to be corrected.

WCP0110W | Classic node disconnect. Pending request TID=terminal ID gets rc=149
Explanation | The named classic Entire Net-Work node is disconnecting while there are active database calls being processed. The application with the indicated Terminal ID will receive an Adabas response code 149 (ADARSP149 - communications error) as the database is no longer reachable.
Action | Restart the application.

WCP0111I | Trace level set to newlevel by the user
Explanation | A user has changed the tracing level to the new numeric level shown in the message.
Action | No action is required for this informational message.

WCP0112I | Ping request received from the user; Target target ID, Length length, Count number
Explanation | A user has requested a PING operation to the target ID identified in the message. PINGs are used to test the integrity of a remote classic connection to the path to a database.
Action | No action is required for this informational message.

WCP0113I | Start new log file requested by the user
Explanation | A user has requested that the current logging file be closed and a new log file started.
Action | No action is required for this informational message.

WCP0114W | No directory information for Entire Net-Work Server=server-ID
Explanation | An internal error occurred for an Entire Net-Work Server. It was not possible to create the definitions for a classic database to allow it to be accessed by e-business clients.
Action | Restart Entire Net-Work.

WCP0115W | Unidentified database ping reply received
Explanation | A PING message was received for which there was no PING request. This indicates that a logical messages sequencing failure occurred at a remote database.
Action | If the error persists, restart the remote database.

WCP0116W | Calling DBID=dbid failed; response code=rc-code
Explanation | Following a connection by an e-business database (message WCP0029I), the Entire Net-Work Kernel tried to send a simple Adabas command to the database to test the integrity of the communications path. This test failed. The database is not e-business registered at the local node nor is it broadcast to classic nodes. This error normally results from a failure to provide an XTSaccess URL for the e-business database in the Directory Server. The Adabas response code from the connection attempt is given in the message. For complete information on Adabas response codes, refer to the Adabas messages and codes documentation.
Action | Verify that you have provided an XTSaccess URL for the e-business database in the Directory Server and try again.

WCP0117W | DBID=dbid is now connected as e-business
Explanation | An Adabas database has connected previously as a classic or local database, disconnected, and is now being connected as an e-business database. This may be intentional or it may be a configuration error.
Action | No action is required for this informational message.

WCP0118W | DBID=dbid issued an e-business disconnection
Explanation | A database was originally connected as a classic or local database, but an e-business disconnection was received. The database is not disconnected.
Action | If the error persists, contact your Software AG technical support representative.

WCP0119W | Duplicate URL=url for target=target in the Directory Server
Explanation | During the Kernel startup process, a duplicate URL was discovered in the Directory Server. The duplicate URL is ignored. This error can be caused by incorrect administration of the Directory Server entries.
Action | No action is necessary unless the duplicate URL is in error. In this case, correct the URL as described in your Adabas Directory Server documentation. Read Directory Server Target Entries in the Software AG Directory Server Installation and Administration Guide.

WCP0120W | This entry URL=url for target=target in the Directory Server has a syntax error
Explanation | During the Kernel startup process, a URL was read in the Directory Server with a syntax error. The incorrect URL is ignored. This error can be caused by incorrect administration of the Directory Server entries.
Action | Correct the URL as described in your Adabas Directory Server documentation. Read Directory Server Target Entries in the Software AG Directory Server Installation and Administration Guide.

WCP0121I | Client ID=client-id Host=host-id Port=portnum accepted; Current clients=count
Explanation | This message indicates that an incoming client connection was made and identifies the client ID, the host ID, the port number, and the number of current active client connections.
Action | No action is required for this informational message.

WCP0122I | Client ID=client-id disconnected; Current clients=count
Explanation | This message indicates that an client connection was dropped and identifies the client ID and the number of current client connections.
Action | No action is required for this informational message.

WCP0123W | e-Business Server not defined
Explanation | An e-business Entire Net-Work Server access definition has not been defined in this Entire Net-Work implementation.
Action | No action is required for this informational message.

WCP0124W | Classic Server not defined
Explanation | A classic Entire Net-Work Server access definition has not been defined in this Entire Net-Work implementation.
Action | No action is required for this informational message.

WCP0125W | e-Business Client Access not defined
Explanation | An Entire Net-Work Client access definition has not been defined in this Entire Net-Work implementation.
Action | No action is required for this informational message.

WCP0126I | License File=name
Explanation | The name of the license file used for this installation of Entire Net-Work is given in the message.
Action | No action is required for this informational message.

WCP0127I | Relayed Client ID=client-id DBID=dbid Host=host Port=port connected; Relayed Clients=count
Explanation | The relay client ID, database ID, host name, port number and number of relayed clients are given in the message..
Action | No action is required for this informational message.

WCP0128I | Relayed Client ID=client-id DBID=dbid disconnected; Relayed Clients=count
Explanation | The relay client ID, database ID, and number of relayed clients that have been disconnected are given in the message..
Action | No action is required for this informational message.

WCP0131I | Client ID=client-id Relaying to DBID=dbid
Explanation | The client named in the message is relaying data to the Adabas database identified in the message.
Action | No action is required for this informational message.

WCP0132I | Client ID=client-id Local Calls to DBID=dbid
Explanation | The client named in the message is making local calls to the Adabas database identified in the message.
Action | No action is required for this informational message.

WCP0134I | Client ID=client-id Name=name
Explanation | The client is identified in the message.
Action | No action is required for this informational message.

WCP0135W | Context innactive life=nnnn seconds (zero is infinite)
Explanation | The innactive life span of the context is given in the message.
Action | No action is required for this warning message.

WCP0136W | Warning: the license does not allow SSL, however the kernel has SSL settings
Explanation | Your Entire Net-Work license file does not support SSL use with Entire Net-Work, but SSL settings have been supplied for the kernel.
Action | Verify that the kernel settings are correct and adjust them if necessary. If they are correct, contact your Software AG technical support representative to obtain an updated license file.

WCP0150I | e-Business server server-name connected via remote Entire Net-Work Server server-name
Explanation | An Entire Net-Work-to-Entire Net-Work connection has occurred and the remote Entire Net-Work has a Kernel connected to it. If a Kernel was started as a Windows service and subsequently shut down by means of the Services Control Panel, this informational message is added to the log.
Action | No action is required for this informational message.

WCP0151I | e-Business DBID=dbid connected via remote Entire Net-Work Server server-name
Explanation | An Entire Net-Work-to-Entire Net-Work connection has occurred and databases known to the remote Entire Net-Work are now known to both.
Action | No action is required for this informational message.

WCP0152I | Kernel kernel-id migrated from WCP73
Explanation | The Kernel listed in the message was successfully migrated from the 7.3 version of Entire Net-Work.
Action | No action is required for this informational message.

WCP0153I | Client client-id migrated from WCL13
Explanation | The client listed in the message was successfully migrated from the 1.3 version of Entire Net-Work Client.
Action | No action is required for this informational message.

WCP0154I | Kernel kernel-id has been migrated from WCP74
Explanation | The kernel listed in the message was successfully migrated from the 7.4 version of Entire Net-Work.
Action | No action is required for this informational message.

WCP0155I | Client client-id migrated from WCL14
Explanation | The client listed in the message was successfully migrated from the 1.4 version of Entire Net-Work Client.
Action | No action is required for this informational message.

WCP0156I | e-Business DBID=dbid rejected for traffic relay
Explanation | An e-business database was rejected for traffic relay, as defined by the Entire Net-Work filter settings. Entire Net-Work will not process requests for the database with the database ID given in the message.
Action | No action is required for this informational message.

WCP0157I | Classic DBID=dbid rejected for traffic relay
Explanation | A classic database was rejected for traffic relay, as defined by the Entire Net-Work filter settings. Entire Net-Work will not process requests for the database with the database ID given in the message.
Action | No action is required for this informational message.

WCP0158I | Adabas DBID=dbid verified and active
Explanation | During the periodic check of its known connections, Entire Net-Work has verified that its connection to the e-business database listed in the message is valid and active.
Action | No action is required for this informational message.

WCP0159I | e-Business DBID=dbid rejected by filter
Explanation | An e-business database was rejected by a filter, as defined by the Entire Net-Work filter settings. Entire Net-Work will not process requests for the database with the database ID given in the message.
Action | No action is required for this informational message.

WCP0160I | Incoming Classic connection
Explanation | This message indicates that an incoming classic connection was made.
Action | No action is required for this informational message.

WCP0161I | Outgoing Classic connection to node
Explanation | This message indicates that an outgoing classic connection was made.
Action | No action is required for this informational message.

WCP0162I | Connection already exists; new connection rejected
Explanation | An attempt to connect to an already active connection occurred. The connection attempt was rejected.
Action | No action is required for this informational message.

WCP0203E | Connection from Kernel=kernel-id rejected by filters; node in the rejected list
Explanation | An attempt to connect by the Kernel referenced in the message was rejected by filters. The Kernel node is included in the rejected filter list.
Action | No action is necessary unless you want a connection by the kernel to be accepted. If you do, adjust the parameters on the Kernel Filters panel in SMH.

WCP0204E | Illegal message from classic server
Explanation | Entire Net-Work received an illegal message from a classic server that it could not recognize. The message is ignored.
Action | If the problem persists, contact your Software AG support representative.

WCP0205E | Adabas reply received from Kernel=kernel-id for an unknown Adabas request
Explanation | An Adabas reply has been received from the identified Kernel for a request that cannot be identified.
Action | If the error persists, restart Entire Net-Work.

WCP0206E | Failure sending data to Kernel=kernel-id.
Explanation | The identified Kernel has been disconnected due to an I/O error detected during the send process.
Action | Check the connection status and try again.

WCP0207E | Classic callback routine failure=code
Explanation | A connection failure has been detected by the internal transport subsystem. An internal transport subsystem failure code is provided in the message.
Action | Verify the connections are valid. If the error persists, contact you network administrator or your Software AG support representative for assistance.

WCP0208E | Unexpected error in registering database=dbid rc=rc
Explanation | An unexpected error has occurred while registering the identified classic database; the return code is provided.
Action | Take corrective action as indicated by the following internal transport subsystem message.

WCP0209E | Connection from Kernel=kernel-id rejected by filters; node not in the accepted list
Explanation | An attempt to connect by the Kernel referenced in the message was rejected by filters. The Kernel node is not included in the accepted filter list.
Action | No action is necessary unless you want a connection by the kernel to be accepted. If you do, adjust the parameters on the Kernel Filters panel in SMH.

WCP0210E | Client ID=client-id Host=host Port=port rejected; Host not accepted by filter
Explanation | The client on the host machine and port listed in the message has been rejected because the host machine is not accepted by the filter settings.
Action | No action is necessary unless you want a connection to be accepted. If you do, adjust the parameters on the Kernel Filters panel in SMH.

WCP0211E | e-Business database connecting with an invalid DBID=dbid
Explanation | An e-business database has connected to Entire Net-Work but has indicated a database number that is not in the valid range of 0 - 65535.
Action | Change the database ID to the valid range.

WCP0212E | Unsolicited connection attempt from Kernel=kernel-id being rejected
Explanation | A classic Entire Net-Work node with an unknown node name attempted to connect to Entire Net-Work while the SECURE parameter was set to ON.
Action | Define the node to Entire Net-Work for open systems.

WCP0213E | Host=hostname not accepted by filter
Explanation | The host machine listed in the message is not accepted by the filter settings.
Action | No action is necessary unless you want a connection to the host machine to be accepted. If you do, adjust the parameters on the Kernel Filters panel in SMH.

WCP0214E | Incoming classic connection from Entire Net-work node=nodename
Explanation | Connecting two Entire Net-Work nodes using the RDA protocol is not allowed.
Action | Remove or redefine the connection attempt.

WCP0215E | SMH callback routine rc=code
Explanation | An error has occurred in a System Management Hub callback routine. The response code is given in the message.
Action | If the problem persists, contact your Software AG support representative.

WCP0216E | SMH send data failure rc=code
Explanation | An error has occurred in a System Management Hub send routine. The return code for the failure is given in the message.
Action | If the problem persists, contact your Software AG support representative.

WCP0217E | Broadcast callback routine failure completion rc=code
Explanation | An error occurred during a broadcast routine. The return code for the failure is given in the message.
Action | Verify that all the nodes are up and correctly configured. If the problem persists, contact your Software AG support representative for assistance.

WCP0218E | Relay callback routine for Client ID=client-id completion rc=code
Explanation | An error occurred during a relay routine. The return code for the failure is given in the message.
Action | Verify that all the nodes are up and correctly configured. If the problem persists, contact your Software AG support representative for assistance.

WCP0219E | Relay callback routine for Client ID=client-id DBID=dbid zero length message
Explanation | A zero length message was received during a relay routine.
Action | If the problem persists, contact your Software AG support representative.

WCP0220E | Local database started with an invalid identifier=dbid
Explanation | A local database has started with an ID of less than 1 or greater than 65535. The startup is being ignored and the database is inaccessible from this Entire Net-Work node.
Action | Check the database configuration files.

WCP0221E | Local database is starting with a conflicting DBID=dbid
Explanation | A local database has started with an ID that is already in use by another database (local, classic, or e-business remote) known to this Entire Net-Work node. The duplicate will be ignored.
Action | This indicated a configuration error that needs to be corrected.

WCP0222E | Adabas reply received from Kernel kernel-id for an incorrect Adabas request
Explanation | An Adabas reply was received from a Kernel. The reply could not be matched to a pending Adabas request and will be ignored.
Action | If the error persists, restart Entire Net-Work.

WCP0223E | Unexpected error in registering Entire Net-Work Server=servername rc=rc
Explanation | An internal error occurred registering Entire Net-Work Server. The response code is given in the message.
Action | Contact your Software AG technical support representative for assistance.

WCP0224E | Client Id=client-id not recognized by this server
Explanation | The client identified in the message is not recognized by the Entire Net-Work server.
Action | If the problem persists, contact your Software AG support representative.

WCP0228E | Adabas call to e-Business DBID=dbid failed rc=code
Explanation | An internal failure occurred during an Adabas call to an e-business database. The database referenced in the Adabas call and the return code from the call are given in the message.
Action | Verify that the Adabas call is valid for the e-business database. If the problem persists, contact your Software AG support representative.

WCP0229E | Adabas ACBX call to e-Business DBID=dbid failed rc=code acbxrc=acbxrc
Explanation | An internal failure occurred during an Adabas ACBX call to an e-business database. The database referenced in the Adabas call, the return code from the call, and the extended Adabas control block (ACBX) return code are given in the message.
Action | Verify that the Adabas call is valid for the e-business database. If the problem persists, contact your Software AG support representative.

WCP0230E | Periodic ping of DBID=dbid failed.
Explanation | During the periodic check of database status, the database became unavailable.
Action | No user action is required.

WCP0231E | Periodic ping of remote Kernel kernel-id failed, kernel disconnected
Explanation | During the periodic check of a remote Kernel, the kernel became unavailable. The Kernel connection is disconnected.
Action | No user action is required.

WCP0232E | Invalid e-Business DBID=dbid; disconnecting...
Explanation | An invalid Adabas DBID was encountered. Connections to the database are disconnected.
Action | If the error persists, contact your Software AG technical support representative.

WCP0233E | Unknown e-Business DBID=dbid; disconnected...
Explanation | An unknown Adabas DBID was encountered and is disconnected.
Action | If the error persists, contact your Software AG technical support representative.

WCP0235E | Unknown e-business Kernel=kernel-id
Explanation | An unknown Kernel (identified in the message) was encountered.
Action | If the error persists, contact your Software AG technical support representative.

WCPO236E | Bad RDA packet header received.
Explanation | A message was received on a classic connection that was not in the correct format. This can be caused by a port number configuration problem or it may be a denial of service attempt by Entire Net-Work 7. The system marks the node as unusable and will not accept data from it.
Action | Review your use of RDA port numbers and correct them if necessary. Otherwise, you can ignore this message.

WCP0237E | Unable to spawn Kernel=kernel-id
Explanation | For some reason, Entire Net-Work cannot start the Kernel identified in the message.
Action | Contact your Software AG technical support representative for assistance.

WCP0238E | Syntax error in URL=url for target=target-id
Explanation | A syntax error occurred during Entire Net-Work processing. The URL in error and the target ID for the URL are given in the message. This error can occur if manual updates to URL connection information are attempted.
Action | Contact your Software AG technical support representative for assistance.

WCP0239E | EBZProxy callback routine for Client ID=client-id DBID=dbid completion rc=rccode
Explanation | A proxy error occurred. The client ID, database ID, and the return code from the attempt are given in the message.
Action | Make sure the proxy nodes are all up and configured correctly. If the problem persists, contact your Software AG support representative for assistance.

WCP0240E | EBZServer callback routine for Client ID=client-id DBID=dbid completion rc=rccode
Explanation | An Entire Net-Work Server error occurred. The client ID, database ID and the return code from the attempt are given in the message.
Action | Make sure the Entire Net-Work Server nodes are all up and configured correctly. If the problem persists, contact your Software AG support representative for assistance.

WCP0241E | EBZClient callback routine for Client ID=client-id DBID=dbid completion rc=rccode
Explanation | An Entire Net-Work Client error occurred. The client ID, database ID and the return code from the attempt are given in the message.
Action | Make sure the Entire Net-Work Client nodes are all up and configured correctly. If the problem persists, contact your Software AG support representative for assistance.

WCP0242E | Failed to relay request to Client ID=client-id DBID=dbid rc=rccode
Explanation | An attempt to relay a request to a database failed. The database ID and the return code from the attempt are given in the message.
Action | Make sure the Entire Net-Work nodes and the database in question are all up and configured correctly. If the problem persists, contact your Software AG support representative for assistance.

WCP0243E | ACBX request for Classic DBID=dbid is not supported
Explanation | An attempt to make an Adabas ACBX call to a classic (pre-Version 6 on open systems or pre-Version 8 on mainframe systems) Adabas database was made. ACBX calls are only allowed against Adabas 8 (or later) databases.
Action | Resolve the error (either run the ACBX call against a valid database or change the call to an ACB call) and try again.

WCP0245E | DBID=dbid is invalid, request rejected
Explanation | A request was made to an invalid database.
Action | Correct the database specification and try again.

WCP0246E | DBID=dbid is inactive, request rejected
Explanation | A request was made to an inactive Adabas database.
Action | Start the Adabas database and try again.

WCP0247E | Context with Verifier=nnnn LocalContext=context-id DBID=dbid ClientId=client-id does not exist; request rejected
Explanation | A communication error occurred. The request is rejected. The database ID of the database to which the request was directed is given in the message.
Action | Verify that all connections and the database in question are up and configured correctly. If the problem persists, contact your Software AG support representative for assistance.

WCP0248E | Outbound connection failure; unknown target
Explanation | An outbound connection was attempted but failed because the target could not be identified..
Action | Verify that all connections are up and configured correctly. If the problem persists, contact your Software AG support representative for assistance.

WCP0249E | Invalid DBID=dbid, no corresponding Kernel defined
Explanation | A communication error occurred. The request is rejected. The database ID of the database to which the request was directed is given in the message.
Action | Verify that all connections and the database in question are up and configured correctly. If the problem persists, contact your Software AG support representative for assistance.

WCP0250E | Failure to send data Kernel=kernel-id rc=rccode
Explanation | A communication error occurred. The request is rejected. The return code from the request is given in the message.
Action | Verify that all connections are up and configured correctly. If the problem persists, contact your Software AG support representative for assistance.

WCP0251E | Unknown request Client ID=client-id DBID=dbid, disconnecting...
Explanation | An unknown client request was encountered. The client ID and Adabas database ID are given in the message.
Action | Verify that all connections are up and configured correctly. If the problem persists, contact your Software AG support representative for assistance.

WCP0252E | Client ID=client-id Host=hostname Port=port rejected; the number of client connections cannot exceed=count
Explanation | A client request was not processed because the number client connections has been exceeded. The client ID, host name, port number, and maximum number of client connections are given in the message.
Action | Verify that the maximum number of client connections is set correctly. If the problem persists, contact your Software AG support representative for assistance.

WCP0253E | Replying to Client ID=client-id DBID=dbid failed rc=rccode
Explanation | An attempt to reply to a client failed. The client ID, Adabas database ID, and return code from the attempt are given in the message.
Action | Verify that all connections are up and configured correctly. If the problem persists, contact your Software AG support representative for assistance.

WCP0254E | Client ID=client-id Host=hostname Port=port rejected; The CPU Threshold=percentage exceeds maximum allowed=value
Explanation | The client on the host machine and port listed in the message was rejected because the CPU threshold was exceeded.
Action | Increase the CPU threshold setting. If the problem persists, contact your Software AG support representative for assistance.

WCP0255E | ClientId=client-id DBID=dbid Replying error code=error to client
Explanation | An attempt to reply to a client failed. The client ID, Adabas database ID, and error from the attempt are given in the message.
Action | Verify that all connections are up and configured correctly. If the problem persists, contact your Software AG support representative for assistance.

WCP0256E | DBID=dbid is a non-accessible mainframe database; client traffic is not allowed.
Explanation | An attempt to connect to a mainframe database failed. The Adabas database ID is given in the message.
Action | Verify that all connections are up and configured correctly. If the problem persists, contact your Software AG support representative for assistance.

WCP0257E | Disconnecting Kernel=kernel-id ...
Explanation | An error occurred. The Kernel listed in the message is disconnected.
Action | Verify that all connections are up and configured correctly. If the problem persists, contact your Software AG support representative for assistance.

WCP0258E | Context=context DBID=dbid set for deletion; request rejected.
Explanation | An attempt to delete the Adabas context listed in the message for the database listed in the message failed.
Action | Verify that all connections are up and configured correctly. If the problem persists, contact your Software AG support representative for assistance.

WCP0258E | Context deleted for DBID=dbid; request rejected
Explanation | An attempt to connect to the Adabas database listed in the message could not occur because the context for the database is deleted.
Action | Verify that all connections are up and configured correctly. If the problem persists, contact your Software AG support representative for assistance.

WCP0259E | Unexpected destroy context received for Context=context ClientId=client-id from ClientId=client-id; request rejected
Explanation | An unexpected request to destroy a context was received for a client. The request is rejected.
Action | If the problem persists, contact your Software AG support representative for assistance.

WCP0301S | Unable to set the Directory Server
Explanation | An internal error occurred.
Action | Contact your Software AG technical support representative for assistance.

WCP0302S | Unable to initialize Directory Server
Explanation | An internal error has occurred in the internal transport subsystem, preventing the use of Directory Services.
Action | Contact your Software AG technical support representative for assistance.

WCP0303S | Unable to start Directory Server
Explanation | An internal error has occurred in the internal transport subsystem, preventing the use of Directory Services.
Action | Contact your Software AG technical support representative for assistance.

WCP0304S | Unable to add a Directory Server entry
Explanation | An internal error has occurred in the internal transport subsystem, preventing the use of Directory Services.
Action | Contact Software AG support with the information from accompanying message WCP0030I.

WCP0308S | Unable to start the System Management Hub
Explanation | This error is usually caused by an error in the internal transport subsystem.
Action | See the internal transport subsystem message following this message for more information.

WCP0310S | Work Semaphore failed in thread thread-number error=error-number
Explanation | The Entire Net-Work threading mechanism failed.
Action | Repeated occurrences of this message may require a restart of the Entire Net-Work Kernel.

WCP0311S | Threading yield: failed in thread thread-number error=error-number
Explanation | The Entire Net-Work threading mechanism failed.
Action | Repeated occurrences of this message may require a restart of the Entire Net-Work Kernel.

WCP0312S | Invalid System Management Hub eyecatcher received
Explanation | An invalid message was received from a System Management Hub. This error can be caused by incorrect Directory Service entries. The message is ignored.
Action | Check the version of the System Management Hub being used for compatibility with Entire Net-Work.

WCP0313S | Invalid System Management Hub protocol version received
Explanation | An invalid message was received from a System Management Hub. This error can be caused by incorrect Directory Service entries. The message is ignored.
Action | Check the version of the System Management Hub being used for compatibility with Entire Net-Work.

WCP0314S | Invalid System Management Hub segment received
Explanation | An invalid message was received from a System Management Hub. This error can be caused by incorrect Directory Service entries. The message is ignored.
Action | Check the version of the System Management Hub being used for compatibility with Entire Net-Work.

WCP0315S | Request failed to wake work semaphore rc=rccode
Explanation | The Entire Net-Work semaphoring mechanism failed. The return code from the call is given in the message.
Action | Contact your Software AG technical support representative for assistance.

WCP0316S | Thread wakeup call failed rc=rccode
Explanation | The Entire Net-Work threading mechanism failed. The return code from the call is given in the message.
Action | Repeated occurrences of this message may require a restart of the Entire Net-Work Kernel.

WCP0317S | Unable to remove Directory Service entry
Explanation | An internal error occurred.
Action | Contact your Software AG technical support representative for assistance.

WCP0318S | Local database resources problem. Increase NU parameter.
Explanation | An internal error occurred.
Action | Contact your Software AG technical support representative for assistance.

WCP0319S | Request failed to wake timer semaphore rc=rccode
Explanation | The Entire Net-Work semaphoring mechanism failed. The return code from the call is given in the message.
Action | Contact your Software AG technical support representative for assistance.

WCP0402F | Unable to continue due to a severe error at startup
Explanation | A previously logged error is preventing the startup of Entire Net-Work.
Action | Correct the previously reported error and restart Entire Net-Work.

WCP0406F | Semaphore for TimerThread failed rc=rccode
Explanation | The Entire Net-Work timer threading mechanism failed. The return code is given in the message.
Action | Repeated occurrences of this message may require a restart of the Entire Net-Work Kernel.

WCP0407F | Thread create for TimerThread failed rc=rccode
Explanation | The Entire Net-Work threading mechanism failed. The return code is given in the message.
Action | Repeated occurrences of this message may require a restart of the Entire Net-Work Kernel.

WCP0408F | Semaphore for WorkSemaphore failed rc=rccode
Explanation | The Entire Net-Work threading mechanism failed. The return code is given in the message.
Action | Repeated occurrences of this message may require a restart of the Entire Net-Work Kernel.

WCP0409F | Thread create for thread thread-number failed rc=rccode
Explanation | The Entire Net-Work threading mechanism failed. The return code is given in the message.
Action | Repeated occurrences of this message may require a restart of the Entire Net-Work Kernel.

WCP0410F | Threading mechanism failed to start rc=rccode
Explanation | The Entire Net-Work threading mechanism failed. The return code is given in the message.
Action | Repeated occurrences of this message may require a restart of the Entire Net-Work Kernel.

WCP0411F | Semaphore for killer thread failed rc=rccode
Explanation | The Entire Net-Work killer threading mechanism failed. The return code is given in the message.
Action | Repeated occurrences of this message may require a restart of the Entire Net-Work Kernel.

WCP0412F | Thread create for killer thread failed rc=rccode
Explanation | The Entire Net-Work killer threading mechanism failed. The return code is given in the message.
Action | Repeated occurrences of this message may require a restart of the Entire Net-Work Kernel.

WCP0413F | Killer thread has timed out shutdown. Task exiting
Explanation | The Entire Net-Work killer thread ran to completion. The killer thread runs when normal shutdown has problems.
Action | No user action is required.

WCP0414F | Remote Directory Server cannot be accessed
Explanation | An attempt was made to use a remoteDirectory Server. The attempt failed.
Action | Determine why the remote Directory Server cannot be accessed, fix the problem, and try again.

WCP0415F | CFG Directory Server cannot be accessed
Explanation | A Directory Server problem occurred.
Action | Make sure no Directory Server or Entire Net-Work installation files were deleted and that your user ID has security access to use all files in the installation directories. If the problem persists, contact your Software AG support representative for assistance.

WCP0416F | INI Directory Server cannot be accessed
Explanation | A Directory Server problem occurred.
Action | Make sure no Directory Server or Entire Net-Work installation files were deleted and that your user ID has security access to use all files in the installation directories. If the problem persists, contact your Software AG support representative for assistance.

WCP0501F | Licensing file for Entire Net-Work not found
Explanation | The license file for Entire Net-Work was not found.
Action | Contact your Software AG technical support representative for assistance.

WCP0502F | No Product Key found in Entire Net-Work Licensing file
Explanation | The product key is missing from the license file.
Action | Contact your Software AG technical support representative for assistance.

WCP0503F | License Key is invalid or has been tampered with
Explanation | The license key in the license file is invalid.
Action | Contact your Software AG technical support representative for assistance.

WCP0504F | Required parameter not found in licensing file
Explanation | A required parameter is missing from the license file.
Action | Contact your Software AG technical support representative for assistance.

WCP0505F | Required component not found in licensing file
Explanation | A required component is missing from the license file.
Action | Contact your Software AG technical support representative for assistance.

WCP0506F | All license parameters need to be set
Explanation | All parameters of the license key require a value. The license key is not valid.
Action | Contact your Software AG technical support representative for assistance.

WCP0507F | Tried to use the external version to create a license
Explanation |
Action | Contact your Software AG technical support representative for assistance.

WCP0508F | Memory failure when checking the license
Explanation | A memory failure occurred during product license processing.
Action | Contact your Software AG technical support representative for assistance.

WCP0509F | License expired
Explanation | The license key in the license file has expired.
Action | Contact your Software AG technical support representative for assistance.

WCP0510F | License does not contain the correct OS
Explanation | The operating system for which the license applies does not match the operating system of the machine on which you have attempted to deploy Entire Net-Work.
Action | Contact your Software AG technical support representative for assistance.

WCP0511F | File read license error (fread)
Explanation | The license file cannot be read.
Action | Contact your Software AG technical support representative for assistance.

WCP0512F | Trial License Key file must not be write-protected
Explanation | The trial license is write-protected.
Action | Remove the write protection from the trial license file.

WCP0513F | ASCII-to-EBCDIC (or vice-versa) conversion error occurred
Explanation | An internal ASCII-to-EBCDIC conversion error occurred while trying to process the license file.
Action | Contact your Software AG technical support representative for assistance.

WCP0514F | UTF License Conversion Source Exhausted
Explanation | An internal UTF conversion error occurred while trying to process the license file.
Action | Contact your Software AG technical support representative for assistance.

WCP0515F | UTF License Conversion Target Exhausted
Explanation | An internal UTF conversion error occurred while trying to process the license file.
Action | Contact your Software AG technical support representative for assistance.

WCP0516F | File License write error (fwrite)
Explanation | A write error occurred while trying to process the license file.
Action | Contact your Software AG technical support representative for assistance.

WCP0517F | GetVersion() failed
Explanation | An internal error occurred during license file processing.
Action | Contact your Software AG technical support representative for assistance.

WCP0518F | File License read error (fseek)
Explanation | An attempt to read the license file failed.
Action | Contact your Software AG technical support representative for assistance.

WCP0519F | # of physical CPUs present exceeded
Explanation | The number of CPUs you are using exceeds the number allowed by the Entire Net-Work license.
Action | Contact your Software AG technical support representative for assistance.

WCP0520F | determination of # of CPU failed
Explanation | An attempt to identify the number CPUs during license processing failed.
Action | Contact your Software AG technical support representative for assistance.

WCP0521F | iwmqvs() failed
Explanation | An internal error occurred during license processing.
Action | Contact your Software AG technical support representative for assistance.

WCP0522F | Tag CPU-ID not found
Explanation | The CPU ID setting cannot be found in the license file.
Action | Contact your Software AG technical support representative for assistance.

WCP0523F | Tag LPARName not found
Explanation | The logical partition name cannot be found while processing the license file.
Action | Contact your Software AG technical support representative for assistance.

WCP0524F | LPARName not allowed for MSU
Explanation | An internal error occurred during license processing.
Action | Contact your Software AG technical support representative for assistance.

WCP0525F | MSU value insufficient
Explanation | The MSU value in the license file is insufficient.
Action | Contact your Software AG technical support representative for assistance.

WCP0526F | Check MSU (warning)
Explanation | The MSU value in the license needs to be checked.
Action | Contact your Software AG technical support representative for assistance.

WCP0551F | Unable to retrieve current version registry value
Explanation | An internal error occurred during license processing.
Action | If the error persists, reinstall Entire Net-Work correctly.

WCP0552F | Unable to retrieve common files registry value
Explanation | An internal error occurred during license processing.
Action | If the error persists, reinstall Entire Net-Work correctly.

WCP0553F | Error in cleaning up registry access
Explanation | An internal error occurred during license processing.
Action | If the error persists, reinstall Entire Net-Work correctly.

WCP0554F | Unable to resolve the $SAG environment value
Explanation | UNIX systems only. The $SAG environment variable must point to a standard Software AG product directory structure.
Action | Ensure $SAG is set to the correct value.

WCP0555F | This Kernel is not correctly licensed to run Entire Net-Work Server
Explanation | The local Entire Net-Work configuration is not licensed to operate in this system. This error can be caused by illegally copying license files.
Action | Obtain a valid license file for Entire Net-Work and install it in the appropriate /Lkey directory.

WCP0556E | The license does not provide the maximum number of clients allowed
Explanation | The license is not valid; it does not provide the maximum number of clients allowed.
Action | Obtain a valid license file for Entire Net-Work and install it in the appropriate /Lkey directory.

WCP0557E | The license does not specify if SSL is allowed
Explanation | The license is not valid; it does not provide the maximum number of clients allowed.
Action | Obtain a valid license file for Entire Net-Work and install it in the appropriate /Lkey directory.

WCP0558I | The system has virtualization present
Explanation | The virtualization parameter PPAR is present for the system.
Action | No action is required for this informational message.

WCP0559I | License set for Packages=pkg PhysCPU=physcpuid LogicalCPU=logcpuid
Explanation | The license has been established for the software package with the physical and logical CPU IDs listed in the message.
Action | No action is required for this informational message.

WCP0560F | The CPU count verification failed
Explanation | The number of CPUs used does not match the number of CPUs allowed by the license.
Action | Resolve the difference in these counts. Entire Net-Work cannot be used until these numbers are resolved. For assistance, contact your Software AG technical support representative.

WCP0561I | The license bucket value is bucketval
Explanation | The core performance class value for this license (the license bucket value) is given in the message.
Action | No action is required for this informational message.

WCP0562I | The license bucket check failed
Explanation | The core performance class value (the license bucket value) for this license is invalid.
Action | Determine why the core performance class of the license failed. For assistance, contact your Software AG technical support representative.

WCP0563I | The CPU model is modelnum
Explanation | The model number of the CPU is given in the message.
Action | No action is required for this informational message.

WCP0564W | The virtualization parameter PPAR not present
Explanation | The virtualization parameter PPAR is not present for the system. An attempt to apply the license to a virtual machine failed.
Action | Verify that the license should support virtual machines. For assistance, contact your Software AG technical support representative.

WCP0565F | The license CPU count check failed
Explanation | The number of CPUs allowed by the license does not match the number of CPUs used.
Action | Resolve the difference in these counts. Entire Net-Work cannot be used until these numbers are resolved. For assistance, contact your Software AG technical support representative.

WCP0601E | Internal errorerrorcode
Explanation | An internal error occurred. The error code is given in the message.
Action | Analyze the error description to try to identify and resolve the problem. If the problem persists, contact your Software AG technical support representative for assistance.

WCP0602E | Node is unreachable. It may not be active or there may be a configuration problem. Detailed error response was: response
Explanation | An Entire Net-Work 7.2 node cannot be reached. The response from the connection attempt is given in the message.
Action | Verify that the node is started. If it is, analyze the installation of the Entire Net-Work 7.2 node to identify and resolve any configuration problem that may exist. If the problem persists, contact your Software AG technical support representative for assistance.

WCP0603E | Kernel kernel-id already exists in the Directory Server
Explanation | An attempt to add a Kernel to the System Management Hub (SMH) was made, but the Kernel already is added.
Action | No action is required for this informational message.

WCP0604I | definition successfully added to SMH management; refreshing the tree...
Explanation | The definition listed in the message was successfully added to SMH.
Action | No action is required for this informational message.

WCP0605E | Kernel kernel-id not found in the Directory Server
Explanation | The Kernel listed in the message was not found in the Adabas Directory Server.
Action | If you cannot identify and resolve the problem, contact your Software AG technical support representative for assistance.

WCP0606I | definition successfully deleted from SMH management; refreshing the tree...
Explanation | The definition listed in the message was successfully deleted from SMH.
Action | No action is required for this informational message.

WCP0607E | No client entries found
Explanation | No client configuration definitions were found to manage in the System Management Hub (SMH).
Action | Verify that the service for Entire Net-Work Client is started. Client configuration definitions cannot be reviewed in the System Management Hub (SMH) unless the client service is started. For more information, read . If the problem persists, contact your Software AG technical support representative for assistance.

WCP0608E | No server definitions found in the Directory Server
Explanation | No Entire Net-Work Server definitions were found in the Adabas Directory Server, so no server machines can be listed in the System Management Hub (SMH).
Action | Verify that Entire Net-Work Server has been installed and that its service has been started. For more information on starting Entire Net-Work Server, read .

WCP0609E | Incompatible version of Net-Work
Explanation | The version of Entire Net-Work you are trying to use is incompatible with the Entire Net-Work SMH agent.
Action | Contact your Software AG technical support representative for assistance.

WCP0610I | Ping request returned in number milliseconds
Explanation | The ping request was returned in the number of milliseconds listed in the message.
Action | No action is required for this informational message.

WCP0611I | No databases found on Kernel kernel-id
Explanation | No databases were found on the Kernel listed in the message.
Action | No action is required for this informational message.

WCP0612E | Kernel is unreachable rc=rccode
Explanation | An error occurred during an attempt to communicate with a node. The return code is given in the message.
Action | Use the return code to determine what the problem is and resolve it. Then try again. If the problem persists, contact your Software AG technical support representative.

WCP0613I | No adjacent Kernels found on Kernel=kernel-id
Explanation | No connection were made. Either the Kernel is down or there is a configuration error.
Action | No action is required for this informational message.

WCP0614I | No clients found on Kernel=kernel-id
Explanation | No clients were found on the Kernel listed in the message.
Action | No action is required for this informational message.

WCP0615I | No hosts connected to Kernel=kernel-id found
Explanation | No hosts were found connected to the Kernel listed in the message.
Action | No action is required for this informational message.

WCP0616I | Shutdown initiated
Explanation | Shutdown processing has been started.
Action | No action is required for this informational message.

WCP0618E | Return code rc received
Explanation | The return code listed in the message was received during Entire Net-Work processing.
Action | Analyze the return code to see if you can diagnose and resolve the problem. If the problem persists, contact your Software AG technical support representative.

WCP0619E | Invalid context
Explanation | An invalid context was encountered.
Action | Verify that all connections and the database in question are up and configured correctly. If the problem persists, contact your Software AG support representative for assistance.

WCP0620E | Invalid Client
Explanation | An invalid client was encountered.
Action | Verify that all clients are configured correctly. If the problem persists, contact your Software AG support representative for assistance.

WCP0621I | New log file started
Explanation | A new log file has been started.
Action | No action is required for this informational message.

WCP0622I | Trace level set
Explanation | A new trace level has been set.
Action | No action is required for this informational message.

WCP0623I | Stats level set
Explanation | A new statistics level has been set.
Action | No action is required for this informational message.

WCP0624I | Dump configuration initiated
Explanation | A dump configuration has been initiated.
Action | No action is required for this informational message.

WCP0625E | Invalid DBID
Explanation | An invalid Adabas database ID has been specified.
Action | Specify a correct database ID.

WCP0626E | Invalid Host
Explanation | An invalid host was specified.
Action | Specify a valid host name.

WCP0627E | Directory Server is unreachable. It may not be active or there may be a configuration problem. Detailed error response was: error
Explanation | A problem occurred during an attempt to communicate with the Adabas Directory Server.
Action | Verify that the Adabas Directory Server is stated and try again. If the problem persists, contact your Software AG technical support representative.

WCP0628I | Connect procedure has been initiated
Explanation | A connection attempt was started.
Action | No action is required for this informational message.

WCP0629I | Disconnect procedure has been initiated
Explanation | A disconnection attempt was started.
Action | No action is required for this informational message.

WCP0630I | Delete procedure successful
Explanation | The deletion attempt was successful.
Action | No action is required for this informational message.

WCP0631E | Invalid node
Explanation | An attempt was made connect to an invalid node.
Action | Refresh your SMH screens. The node was probably deleted since you started your SMH session.

WCP0632E | Kernel already connected
Explanation | An attempt occurred to connect to a Kernel that is already connected.
Action | If you are having problems communicating with the Kernel and you are getting this error, contact your Software AG technical support representative for assistance.

WCP0633E | Kernel already disconnected
Explanation | An attempt was made to disconnect a Kernel that is already disconnected.
Action | No action is required.

WCP0634E | Unknown return code rccode received
Explanation | An unknown return code was received. The return code is given in the message.
Action | Contact your Software AG technical support representative for assistance.

WCP0635E | XTS library cannot be loaded
Explanation | The Software AG Transport Subsystem library could not be loaded.
Action | Contact your Software AG technical support representative for assistance.

WCP0636E | Kernel already allocated
Explanation | An attempt was made to allocate a Kernel that was already allocated.
Action | Try specifying a different Kernel name for the Kernel you are allocating. If the problem persists, contact your Software AG technical support representative.

WCP0637E | Invalid request
Explanation | An invalid request was attempted.
Action | If you cannot identify and resolve the problem, contact your Software AG technical support representative for assistance.

WCP0638E | Failure to create file
Explanation | An attempt to create a file was unsuccessful.
Action | If you cannot identify and resolve the problem, contact your Software AG technical support representative for assistance.

WCP0639E | Unknown command code cmd-code received
Explanation | An unknown command request was received. The command code is given in the message.
Action | If you cannot identify and resolve the problem, contact your Software AG technical support representative for assistance.

WCP0640I | Kernel name configuration successful
Explanation | The Kernel definition configuration attempt was successful. The Kernel definition name is given in the message.
Action | No action is required for this informational message.

WCP0641I | Client name configuration successful
Explanation | The client configuration attempt was successful. The client configuration name is given in the message.
Action | No action is required for this informational message.

WCP0642I | Migrating kernel-id Kernel successful
Explanation | An attempt to migrate a Kernel definition from an older version of Entire Net-Work to a newer version was successful. The name of the Kernel is given in the message.
Action | No action is required for this informational message.

WCPO643I | Kernel kernel-id migrated from WCP73
Explanation | The Kernel listed in the message has been migrated from a previous version of Entire Net-Work.
Action | No action is required for this informational message.

WCP0644E | Invalid entry
Explanation | An invalid entry was specified.
Action | Contact your Software AG technical support representative for assistance.

WCP0645I | Modification procedure successful
Explanation | The modification was successful.
Action | No action is required for this informational message.

WCP0646E | Invalid data
Explanation | Invalid data was specified.
Action | Correct the data and try again. If the problem persists, contact your Software AG technical support representative.

WCP0647I | Client name deletion successful
Explanation | The attempt to delete the client configuration was successful.
Action | No action is required for this informational message.

WCP0648I | Kernel name deletion successful
Explanation | The attempt to delete the Kernel definition was successful.
Action | No action is required for this informational message.

WCP0649I | Kernel name is active, deletion failed
Explanation | An attempt to delete a Kernel definition was made, but the Kernel is running.
Action | Stop the Kernel before attempting to delete it.

WCP0650I | Kernel name is active, starting not initiated
Explanation | An attempt to start a Kernel was made, but the Kernel is already running.
Action | No action is required for this informational message.

WCP0651I | Startup initiated for Kernel name
Explanation | The Kernel is starting.
Action | No action is required for this informational message.

WCP0652I | Unable to start this Kernel
Explanation | The Kernel cannot be started for some reason.
Action | Examine the Kernel log file for reasons for the failure, make appropriate corrections, and try again. If the error persists, contact your Software AG technical support representative for assistance.

WCP0653I | Set parameters successful
Explanation | The parameter changes were successfully processed.
Action | No action is required for this informational message.

WCP0654I | No Kernels available
Explanation | No Kernel definitions have been defined, so none are available.
Action | Define some Kernel definitions.

WCPO655I | Client client-id migrated from WCL13
Explanation | The client listed in the message has been migrated from a previous version of Entire Net-Work.
Action | No action is required for this informational message.

WCP0656E | Kernel=name cannot have more then 8 characters
Explanation | The name of a Kernel definition cannot exceed eight characters. An attempt was made to specify a name longer than eight characters and the name specified is given in the message.
Action | Reduce the length of the name of the Kernel definition.

WCP0657E | XTS function cannot be loaded.
Explanation | An internal error occurred.
Action | Contact your Software AG technical support representative for assistance.

WCP0658E | A valid (non-zero) port has to be specified
Explanation | The port number was not specified or is invalid.
Action | Specify a valid port number. For more information, read .

WCP0659E | A valid (non-zero) host has to be specified
Explanation | A host name was not specified or is invalid.
Action | Specify a valid host name.

WCP0660E | Data segment unknown=data
Explanation | Data received by the SMH agents is not recognized.
Action | Contact your Software AG technical support representative for assistance.

WCP0661E | SSL Connection not allowed
Explanation | An SSL connection was attempted but is not allowed.
Action | If the problem persists, contact your Software AG support representative for assistance.

WCP0670E | No URL available yet in the Directory Server for the target server
Explanation | An internal error occurred in a Directory Server definition.
Action | Contact your Software AG technical support representative for assistance.

WCP0671E | Entire Net-Work Kernel=kernel-id has to be unique across the network
Explanation | The name of an Entire Net-Work Kernel must be unique across the network. A name that has already been used was specified.
Action | Change the Kernel name so it is unique.

WCP0672E | Default client cannot be deleted
Explanation | You cannot delete the default client configuration that is distributed with Entire Net-Work Client.
Action | No action is required.

WCP0673E | DBID syntax error; follow this rule : n1 or n1,n2 or n1-n2, or n1,n2,n2,n4-n5
Explanation | The list of databases was not specified correctly. The syntax for a list of databases is given in the message.
Action | Correct the list of databases.

WCP0674E | Trace syntax error; follow this rule : nnnnn or 0xnnnn
Explanation | The trace information was not specified correctly. The correct syntax for trace information is given in the message.
Action | Correct the trace information.

WCP0675E | UNSOLICITED values are YES or NO
Explanation | An invalid value for the UNSOLICITED parameter was specified. Valid values are "YES" or "NO".
Action | Specify a valid value for the parameter.

WCP0676E | Adabas timeout cannot be less then 5 seconds
Explanation | An invalid value was specified for the ADABAS_TIMEOUT parameter. The value cannot be less than 5 seconds.
Action | Specify a valid value for the parameter.

WCP0677I | Command sent to Kernel kernel-id
Explanation | The command was sent to the Kernel listed in the message.
Action | No action is required for this informational message.

WCP0678E | The timer timeout has to be between 1 and 3600 seconds
Explanation | An invalid value was specified for the TIMER_TIMEOUT parameter. The value must be between 1 and 3600 seconds.
Action | Specify a valid value for the parameter.

WCP0679E | The statistics logging period has to be between 1 and 1440 minutes
Explanation | An invalid value was specified for the STATISTICS_INTERVAL parameter. The value must be between 1 and 1440 minutes.
Action | Specify a valid value for the parameter.

WCP0680E | The log size value has to be between 1MB and 500MB
Explanation | An invalid value was specified for the LOGSIZE parameter. The value must be between 1 and 500 megabytes.
Action | Specify a valid value for the parameter.

WCP0681E | The remote check period has to be between 1 and 1440 minutes
Explanation | An invalid value was specified for the PING_DB_INTERVAL parameter. The value must be between 1 and 1440 minutes.
Action | Specify a valid value for the parameter.

WCP0682E | The local check period has to be between 5 and 600 seconds
Explanation | An invalid value was specified for the CHECK_DBS_INTERVAL parameter. The value must be between 5 and 600 seconds.
Action | Specify a valid value for the parameter.

WCP0683E | Port=port value has to be between 0 and 65535
Explanation | An invalid port number was specified.
Action | Specify a valid port number. For more information, read .

WCP0684E | Kernel ID value has to be between 1 and 65535
Explanation | An invalid value was specified for the Kernel ID. The value must be between 1 and 65535.
Action | Specify a valid Kernel ID.

WCP0685E | Client name=name cannot have more then 16 characters
Explanation | An invalid client configuration name was specified. The client configuration name cannot exceed 16 characters.
Action | Specify a valid client configuration name.

WCP0686E | Relay values are YES or NO
Explanation | An invalid value was specified for the RELAY_VALUES parameter. Valid values are "YES" or "NO".
Action | Specify a valid value for the parameter.

WCP0687E | Port=port value has to be between 1 and 65535
Explanation | An invalid port number was specified. Valid values must lie between "1" and "65535".
Action | Correct the port number and try again.

WCP0689E | Port=port string is not numerical
Explanation | An invalid port number was specified.
Action | Specify a valid port number. For more information, read .

WCP0690E | Numerical values required for parameter=parameter-name
Explanation | A non-numeric value was specified for a parameter when a numeric value is expected. The parameter name is given in the message.
Action | Specify a valid value for the parameter.

WCP0691E | AUTOSTART/AUTOSTOP values are YES or NO
Explanation | An invalid value was specified for the AUTOSTART or AUTOSTOP parameters. Valid values are "YES" or "NO".
Action | Specify a valid value for the parameter.

WCP0692E | No Kernel definition found in Directory Server
Explanation | No Kernel definitions were found to manage in the Adabas Directory Server and, consequently, in the System Management Hub (SMH).
Action | Verify that the service for Entire Net-Work Server is started. Kernel definitions cannot be reviewed in the System Management Hub (SMH) unless the server service is started. For more information, read . If the problem persists, contact your Software AG technical support representative for assistance.

WCP0693E | No Net-Work 7.X.X found in Directory Server
Explanation | No Entire Net-Work 7.2 node definitions were found to manage in the Adabas Directory Server and, consequently, in the System Management Hub (SMH).
Action | If you have any Entire Net-Work 7.2 nodes to be managed, you must first add them in SMH.

WCP0694E | The DBID has to be between 1 and 65535
Explanation | An invalid Adabas database ID was specified. Valid database IDs are between 1 and 65535.
Action | Specify a valid database ID.

WCP0695E | Kernel=name should not include the # . [ ] = \ \ * characters
Explanation | The name of a Kernel definition was specified with one of the special characters listed in the message. These characters cannot be used in a Kernel definition name.
Action | Specify a valid Kernel definition name.

WCP0696E | Client name should not include the # . [ ] = \ \ * characters
Explanation | The name of a client configuration was specified with one of the special characters listed in the message. These characters cannot be used in a client configuration name.
Action | Specify a valid client configuration name.

WCP0697E | The WCP72 Kernel does not appear to be local
Explanation | The Entire Net-Work 7.2 node cannot be found and does not appear to be installed on the local machine.
Action | Correct the Entire Net-Work 7.2 node definition in SMH to point to the correct host machine.

WCP0698E | Duplication
Explanation | An attempt to add a definition that has already been added. The definition you tried to add is not added.
Action | No action is required for this informational message.

WCP0699E | Kernel file does not exist (it could be deleted)
Explanation | An attempt occurred to delete a Kernel failed; it is possible that it was already deleted.
Action | No action is required for this informational message.

WCP0700E | No Kernel entries found
Explanation | No Kernel definitions were found to manage in the System Management Hub (SMH).
Action | Verify that the service for Entire Net-Work Server is started. Kernel definitions cannot be reviewed in the System Management Hub (SMH) unless the server service is started. For more information, read . If the problem persists, contact your Software AG technical support representative for assistance.

WCP0701E | No Server entries found
Explanation | No Entire Net-Work Server entries were found to manage in the System Management Hub (SMH).
Action | Verify that the service for Entire Net-Work Server is started. Server definitions cannot be reviewed in the System Management Hub (SMH) unless the server service is started. For more information, read . If the problem persists, contact your Software AG technical support representative for assistance.

WCP0702E | Kernel=kernel-id name cannot be numeric only
Explanation | The Kernel name cannot contain only numeric values.
Action | Specify a valid Kernel name.

WCP0703E | Client name=client-id cannot be numeric only
Explanation | The client name cannot contain only numeric values.
Action | Specify a valid client name.

WCP0704E | No such entry in the Directory Server, please refresh!
Explanation | An attempt to reference an entry in the Directory Server failed.
Action | Refresh your SMH display to obtain the latest Directory Server entries.

WCP0705E | Port value has to be between 1 and 65535
Explanation | An invalid port number was specified.
Action | Specify a valid port number. For more information, read .

WCP0706E | Retry string not numerical
Explanation | The retry count specification was not numeric.
Action | Specify a numeric retry count.

WCP0707E | Retry interval string not numerical
Explanation | The retry interval specification was not numeric.
Action | Specify a numeric retry interval.

WCP0708E | Host name=name should not include the # [ ] = \ \ * characters
Explanation | The host name was specified with one of the special characters listed in the message. These characters cannot be used in a host name.
Action | Specify a valid host name.

WCP0709I | No additional parameters supplied
Explanation | No additional parameters were supplied for the Entire Net-Work Client configuration.
Action | No action is required for this informational message.

WCP0710E | Port=port value has to be between 1 and 65535
Explanation | An invalid port number was specified.
Action | Specify a valid port number. For more information, read .

WCP0711E | Port2=port2 has to be greater than Port1=port1
Explanation | When specifying a range of port numbers, the second port number should be larger than the first port number in the range. The port numbers specified are given in the message.
Action | Specify a valid range of port numbers.

WCP0713E | DBID=dbid string is not numerical
Explanation | The Adabas database ID specified was not numeric.
Action | Specify a numeric database ID.

WCP0714E | DBID2=dbid2 has to be greater than DBID1=dbid1
Explanation | When specifying a range of Adabas database IDs, the second database ID should be larger than the first database ID in the range. The database IDs specified are given in the message.
Action | Specify a valid range of database IDs.

WCP0715E | Empty string
Explanation | A blank string was specified for a parameter.
Action | Specify a valid value for the parameter.

WCP0716E | At least one access definition has to be selected
Explanation | An attempt to add an access definition was made but no access type was selected (for example, Classic, e-business Client, e-business SSL Client, etc.).
Action | Select an access type when adding an access definition.

WCP0717I | No listens found on Kernel =kernel-id
Explanation | No active access entries were found for the active Kernel.
Action | No action is required for this informational message.

WCP0718I | No connections found on Kernel=kernel-id
Explanation | No active connection entries were found for the active Kernel.
Action | No action is required for this informational message.

WCP0719E | REMEMBER_DBID values are YES or NO
Explanation | An invalid value was specified for the REMEMBER_DBID parameter. Valid values are "YES" or "NO".
Action | Specify a valid value for the parameter.

WCP0720E | The number active clients value has to be between 5 and 65535
Explanation | An invalid value was specified for the MAX_CLIENTS parameter. Valid values must be between 5 and 65535.
Action | Specify a valid value for the parameter.

WCP0721E | Timeout error; check if the Server or Kernel is down
Explanation | A system timeout error occurred.
Action | Verify that the Entire Net-Work Server or Kernel is not down. If it is, restart it. If the problem persists, contact your Software AG technical support representative.

WCP0722E | DBID=dbid not defined
Explanation | An Adabas database ID was not specified or an invalid one was specified.
Action | Specify a valid database ID.

WCP0723E | DBID=dbid not active
Explanation | The Adabas database is not active.
Action | Start the database.

WCP0724E | Kernel=kernel-id not defined
Explanation | An attempt was made to ping a Kernel, but the Kernel does not exist.
Action | Refresh your System Management Hub displays. The node may have been deleted since you started this SMH session.

WCP0725E | Kernel=kernel-id not active
Explanation | An attempt was made to ping a Kernel, but the Kernel was not active.
Action | Start the node if you wish.

WCP0726E | No entry available
Explanation | An attempt was made to review an entry that is no longer available.
Action | Refresh your System Management Hub displays. The entry may have been deleted since you started this SMH session.

WCP0727E | Empty Kernel name
Explanation | No Kernel definition name was specified.
Action | Specify a valid Kernel definition name.

WCP0728E | Empty client name
Explanation | No client configuration name was specified.
Action | Specify a valid client configuration name.

WCP0729E | Empty host name
Explanation | No host name was specified.
Action | Specify a valid host name.

WCP0730E | Empty DBID string
Explanation | No Adabas database ID was specified.
Action | Specify at least one database ID.

WCP0731E | Empty port string
Explanation | No port number was specified.
Action | Specify a valid port number. For more information, read .

WCP0732E | No client definitions found in the Directory Server
Explanation | No client configuration definitions were found in the Adabas Directory Server.
Action | Verify that the service for Entire Net-Work Client is started. Client configuration definitions cannot be reviewed in the System Management Hub (SMH) unless the client service is started. For more information, read . If the problem persists, contact your Software AG technical support representative for assistance.

WCP0733E | Connection URL syntax error
Explanation | A syntax error exists in a connection URL. Entire Net-Work cannot make the connection.
Action | Contact your Software AG technical support representative for assistance.

WCP0734E | Connection with the same NODENAME already defined
Explanation | An attempt was made to define a connection to the same node twice. Only one connection definition is needed.
Action | Make sure that there is only one connection definition for the node.

WCP0735E | Host Name=hostname not defined in DNS
Explanation | The host identified in the message is not defined in the DNS.
Action | Contact your Software AG technical support representative for assistance.

WCP0736E | Host Name=hostname not defined in DNS
Explanation | The host identified in the message is not defined in the DNS.
Action | Contact your Software AG technical support representative for assistance.

WCP0738E | Target is down or not defined in the Directory Server
Explanation | A connection attempt was made to a target that is not correctly defined to Entire Net-Work.
Action | Verify that the target definition is correct and complete (no required parameters are undefined) and try again. If the error persists, contact you Software AG technical support representative for assistance.

WCP0739E | Incoming Kernel already connected
Explanation | An attempt was made to define two connections for the same incoming Kernel. Only one connection definition is needed.
Action | Make sure that only one connection definition exists for the incoming Kernel. If the problem persists, contact your Software AG technical support representative for assistance.

WCP0740E | Connection failure; reason=rsncode
Explanation | An attempt to make a defined connection failed. The reason code is given in the message.
Action | Analyze the reason code and try to resolve the problem. If the problem persists, contact your Software AG technical support representative for assistance.

WCP0741E | The GATEWAY_THREADS value has to be between 5 and 1024
Explanation | The value of the GATEWAY_THREADS Kernel parameter is not correct. It must be a numeric value between 5 and 1024.
Action | Correct the value and try again.

WCP0742E | No data available
Explanation | The Kernel log file cannot be found.
Action | Contact your Software AG technical support representative.

WCP0743E | MULTIPLEX values are YES or NO
Explanation | An invalid value was specified for the MULTIPLEX parameter. Valid values are "YES" or "NO".
Action | Correct the value and try again.

WCP0744E | NOLOCAL values are YES or NO
Explanation | An invalid value was specified for the NOLOCAL parameter. Valid values are "YES" or "NO".
Action | Correct the value and try again.

WCP0745E | NOREMOTE values are YES or NO
Explanation | An invalid value was specified for the NOREMOTE parameter. Valid values are "YES" or "NO".
Action | Correct the value and try again.

WCP0746E | LOAD_BALANCIING values are YES or NO
Explanation | An invalid value was specified for the LOAD_BALANCING parameter. Valid values are "YES" or "NO".
Action | Correct the value and try again.

WCP0747E | The maximum CPU threshold has to be between 10 and 99
Explanation | An invalid value has been specified for the MAX_CPU_THRESHOLD parameter.
Action | Correct the value and try again.

WCP0749E | STATISTICS_DETAILS values are YES or NO
Explanation | An invalid value was specified for the STATISTICS_DETAILS parameter. Valid values are "YES" or "NO".
Action | Correct the value and try again.

WCP0750E | USE_LOCAL_ADABASES values are YES or NO
Explanation | An invalid value was specified for the USE_LOCAL_ADABASES parameter. Valid values are "YES" or "NO".
Action | Correct the value and try again.

WCP0751E | Kernel=kernel-id is not set to process local databases
Explanation | The Kernel listed in the message is not defined to process local databases.
Action | Correct the USE_LOCAL_ADABASES parameter value in the Kernel definition and try again.

WCP0752E | DATE_STAMP values are YES or NO
Explanation | An invalid value was specified for the DATE_STAMP parameter. Valid values are "YES" or "NO".
Action | Correct the value and try again.

WCP0753E | The CHECK_CXT_INTERVAL value has to be 0 or between 60 and 24*60*60 seconds
Explanation | An invalid value was specified for the CHECK_CXT_INTERVAL parameter. Valid values are zero (0) seconds or lie between 60 seconds and 86,400 seconds (24 * 60 * 60).
Action | Correct the value and try again.

WCP0754I | Kernel is migrated from WCP74
Explanation | The kernel listed in the message was successfully migrated from the 7.4 version of Entire Net-Work.
Action | No action is required for this informational message.

WCP0755I | Client is migrated from WCL14
Explanation | The client listed in the message was successfully migrated from the 1.4 version of Entire Net-Work Client.
Action | No action is required for this informational message.

WCP0756E | DBID=dbid not accessible
Explanation | The database listed in the message could not be accessed.
Action | No action is required for this informational message.